I was out yachting in my Nutshell pram this afternoon, when there was a
loud crunching noise followed by a loss of steering. Yup, snapped the
rudder clean in half.

Can anyone recommend a New England supplier of marine plywood, preferably
one that will sell fractional sheets? Googling has not been productive so
far.

Thanks,

Scott

On 13 Aug 2006 00:36:29 GMT, Scott Cramer wrote:

I was out yachting in my Nutshell pram this afternoon, when there was a
loud crunching noise followed by a loss of steering. Yup, snapped the
rudder clean in half.

Can anyone recommend a New England supplier of marine plywood, preferably
one that will sell fractional sheets? Googling has not been productive so
far.

Thanks,

Scott


Scott- Check this out. My guess is that if they cannot help you they
can direct you to who can.

http://www.buckwoodcraft.com/marine_plywood.htm

Can anyone recommend a New England supplier of marine plywood,
preferably one that will sell fractional sheets? Googling has not
been productive so far.

Scott- Check this out. My guess is that if they cannot help you they
can direct you to who can.

http://www.buckwoodcraft.com/marine_plywood.htm

Thanks, Joe - I'll be making some calls in the morning.

Scott

Try Boulter http://www.boulterplywood.com/ and Noah's
http://www.noahsmarine.com/ .

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"Scott Cramer" wrote in message
...
I was out yachting in my Nutshell pram this afternoon, when there was a
loud crunching noise followed by a loss of steering. Yup, snapped the
rudder clean in half.

Can anyone recommend a New England supplier of marine plywood, preferably
one that will sell fractional sheets? Googling has not been productive so
far.

Thanks,

Scott

On Sun, 13 Aug 2006 08:32:44 -0400, "Glenn Ashmore"
wrote:

Try Boulter http://www.boulterplywood.com/ and Noah's
http://www.noahsmarine.com/ .

Very interesting, Glenn. How did you obtain the knowledge required to
build such a substantial craft?

Joe Bemier wrote:

On Sun, 13 Aug 2006 08:32:44 -0400, "Glenn Ashmore"
wrote:

Try Boulter http://www.boulterplywood.com/ and Noah's
http://www.noahsmarine.com/ .

Very interesting, Glenn. How did you obtain the knowledge required to
build such a substantial craft?

You might also check with an outdoor sign company. You might be able to
get some HDO (High Density Overlay) slightly better than marine plywood.

--

"Glenn Ashmore" wrote in news:IZEDg.9803$ok5.9316
@dukeread01:

Try Boulter http://www.boulterplywood.com/ and Noah's
http://www.noahsmarine.com/ .


Great - thanks for the leads. I'll check them out tomorrow.

Scott