Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
router edge guide
Could you offer some suggestions for making a edge guide for a PC 693pk
router? Will buy one when I can. Thanks. Patt |
#2
Posted to rec.woodworking
|
|||
|
|||
router edge guide
See design at the http://patwarner.com/pc_621_edge_guide.html link.
Can be made from shop friendly materials, if plastic & metal are unacceptable. ************************************************** ******************** Patt wrote: Could you offer some suggestions for making a edge guide for a PC 693pk router? Will buy one when I can. Thanks. Patt |
#3
Posted to rec.woodworking
|
|||
|
|||
router edge guide
Could you offer some suggestions for making a edge guide for a PC 693pk
router? Will buy one when I can. Thanks. Patt I have one of these http://www.rockler.com/product.cfm?page=1524 and it works very well for times I can't use the table. It also serves as an offset subbase. Andy |
#4
Posted to rec.woodworking
|
|||
|
|||
router edge guide
Patt wrote: Could you offer some suggestions for making a edge guide for a PC 693pk router? Will buy one when I can. Thanks. Patt replace the sub-base with a piece of sheet goods wide enough to cover the base and long enough to reach the edge you want to follow. clamp a stick to it at the necessary distance and rout away... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
books on electrical wiring | Home Repair | |||
PC router edge guide for circles? | Woodworking | |||
Freud FT2000 Router - Guide Bushing | Woodworking | |||
Plunge or non-plunge router better under table? | Woodworking | |||
Knife Steel FAQ updated | Metalworking |