DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   Air Nailgun with portable 12v mini compressor (https://www.diybanter.com/woodworking/166113-air-nailgun-portable-12v-mini-compressor.html)

Antispammer June 19th 06 08:20 AM

Air Nailgun with portable 12v mini compressor
 
Will it work with those 12v mini compressors for car?

thanks in advance


extreme newbie



Upscale June 19th 06 09:07 AM

Air Nailgun with portable 12v mini compressor
 
"Antispammer" wrote in message
...
Will it work with those 12v mini compressors for car?


Only if the compressor can build up enough pressure for the pressure
requirements of the nailgun. Assuming you can obtain the required pressure
and you've shot a nail, you're going to have to wait for the pressure to
build up again before you can shoot the next nail.

In reality, it would likely be faster for you to use a hammer and a nail
set.



J. Clarke June 19th 06 12:31 PM

Air Nailgun with portable 12v mini compressor
 
Antispammer wrote:

Will it work with those 12v mini compressors for car?


If you use the mini-compressor to fill a portable tank perhaps.

thanks in advance


extreme newbie


--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)

Leon June 19th 06 01:33 PM

Air Nailgun with portable 12v mini compressor
 

"Antispammer" wrote in message
...
Will it work with those 12v mini compressors for car?

thanks in advance


extreme newbie


Not like you would need.



Thomas Kendrick June 19th 06 04:27 PM

Air Nailgun with portable 12v mini compressor
 
If it works at all, it will be V E R Y S L O W L Y. A portable air
tank would be a better solution for a few fasteners, then recharge the
air tank. The mini conpressors are NOT for continuous use and get very
hot even when run for inflating a sports ball, much less a car tire.

On Mon, 19 Jun 2006 15:20:12 +0800, "Antispammer"
wrote:

Will it work with those 12v mini compressors for car?

thanks in advance


extreme newbie


John Thomas June 19th 06 05:05 PM

Air Nailgun with portable 12v mini compressor
 
"Antispammer" wrote in news:44965019
@news.starhub.net.sg:

Will it work with those 12v mini compressors for car?

thanks in advance


extreme newbie




What gauge? I used a C-H 'power pal' (think that's what it's called) for
a little while with an 18ga.

As others have said, the compressor runs continuously, noisily, and gets
hot; but if all you need to do is to shoot a couple of (small) nails, it
may work, for some definition of 'work'.

Having said that, it was great justification to go out and buy a real
compressor; and I've since added to my air 'arsenal'.

--
Regards,

JT
Speaking only for myself....

John Emmons June 19th 06 05:28 PM

Air Nailgun with portable 12v mini compressor
 
not to mention that after you strip off the oversized plastic and get it
down to a manageable size, they make a great emergency pump for airing up
your motorcycle tires. If you should ever get a flat while on the road.

Best 12 bucks I've ever spent I think.

John E.

"John Thomas" wrote in message
...
"Antispammer" wrote in news:44965019
@news.starhub.net.sg:

Will it work with those 12v mini compressors for car?

thanks in advance


extreme newbie




What gauge? I used a C-H 'power pal' (think that's what it's called) for
a little while with an 18ga.

As others have said, the compressor runs continuously, noisily, and gets
hot; but if all you need to do is to shoot a couple of (small) nails, it
may work, for some definition of 'work'.

Having said that, it was great justification to go out and buy a real
compressor; and I've since added to my air 'arsenal'.

--
Regards,

JT
Speaking only for myself....




No June 20th 06 04:32 PM

Air Nailgun with portable 12v mini compressor
 
Antispammer wrote:
Will it work with those 12v mini compressors for car?

thanks in advance


extreme newbie


Not likely - I'm having trouble seeing the other replies so I apologize
if this has been suggested. You may be able to charge a small portable
air tank with one of those compressors. You could then use that to drive
the gun. Not a rooofing nailer or framing nailer but brad nailer pin or
finish nailer may be fine. bigger nailers use more air and would use up
capacity very quickly.
Check out -
http://www.harborfreight.com/cpi/cta...emnumber=41712
or sears
http://www.sears.com/sr/javasr/produ...seBVCookie=Yes

Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php


All times are GMT +1. The time now is 02:37 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter