|
MLB Bat Rules
Does MLB allow glued up blanks for bats?
Secondary question: Can the individual laminations be of different woods? Tertiary Question: If glue-ups are not allowed, what woods are allowed? Regards, Tom Watson tjwatson1ATcomcastDOTnet (real email) http://home.comcast.net/~tjwatson1/ |
MLB Bat Rules
"Tom Watson" wrote in message
... Does MLB allow glued up blanks for bats? Secondary question: Can the individual laminations be of different woods? I think sometimes they use cork for inner laminations! -- Stoutman http://www.garagewoodworks.com (Featuring a NEW look) / |
MLB Bat Rules
In article , Tom Watson wrote:
Does MLB allow glued up blanks for bats? No. "1.10 (a) The bat shall be a smooth, round stick not more than 2 3/4 inches in diameter at the thickest part and not more than 42 inches in length. The bat shall be one piece of solid wood." http://www.mlb.com/NASApp/mlb/mlb/of...jectives_1.jsp Secondary question: Can the individual laminations be of different woods? n/a Tertiary Question: If glue-ups are not allowed, what woods are allowed? Anything you want. Rule 1.10 (d) prohibits the use of colored bats without prior approval, and I imagine that an umpire would look a bit askance at a bat made of, say, purpleheart, under that rule. But a strict reading of the rules would permit it. -- Regards, Doug Miller (alphageek at milmac dot com) It's time to throw all their damned tea in the harbor again. |
MLB Bat Rules
In article , Doug
Miller wrote: No. "1.10 (a) The bat shall be a smooth, round stick not more than 2 3/4 inches in diameter at the thickest part and not more than 42 inches in length. The bat shall be one piece of solid wood." Maybe. You edited, Doug... 1.10 (a) The bat shall be a smooth, round stick not more than 2 3/4 inches in diameter at the thickest part and not more than 42 inches in length. The bat shall be one piece of solid wood. *NOTE: No laminated or experimental bats shall be used in a professional game (either championship season or exhibition games) until the manufacturer has secured approval from the Rules Committee of his design and methods of manufacture.* (emphasis mine) |
MLB Bat Rules
"Tom Watson" wrote in message ... Does MLB allow glued up blanks for bats? Secondary question: Can the individual laminations be of different woods? Tertiary Question: If glue-ups are not allowed, what woods are allowed? Ash |
MLB Bat Rules
"Tom Watson" asks: If glue-ups are not allowed, what woods are allowed? Leon answered: Ash Is Hickory allowed and/or used? Lew |
MLB Bat Rules
"Leon" wrote in message . com... "Tom Watson" wrote in message ... Does MLB allow glued up blanks for bats? Secondary question: Can the individual laminations be of different woods? Tertiary Question: If glue-ups are not allowed, what woods are allowed? Ash I have seen maple used by some turners. |
MLB Bat Rules
On Wed, 5 Apr 2006 23:12:38 -0400, "Lee Michaels"
wrote: "Leon" wrote in message .com... "Tom Watson" wrote in message ... Does MLB allow glued up blanks for bats? Secondary question: Can the individual laminations be of different woods? Tertiary Question: If glue-ups are not allowed, what woods are allowed? Ash I have seen maple used by some turners. I saw an interview a while back where a player was saying sometimes depending on the weather they use a different wood. I can't remember whether it was related to how often they'd break or how the ball travelled off it. -Leuf |
MLB Bat Rules
On Wed, 05 Apr 2006 20:21:27 -0400, Tom Watson
wrote: Does MLB allow glued up blanks for bats? No Secondary question: Can the individual laminations be of different woods? Tertiary Question: If glue-ups are not allowed, what woods are allowed? Only two in use in the MLB are Ash and Maple, whether others would be allowed I do not know. (sixoneeight) = 618 |
MLB Bat Rules
In article , Markem
wrote: Does MLB allow glued up blanks for bats? No Read the rules. There is provision for laminated bats to be approved. |
MLB Bat Rules
"Dave Balderstone" wrote in message
news:050420062234298987%dave@N_O_T_T_H_I_Sbalderst one.ca... In article , Markem wrote: Does MLB allow glued up blanks for bats? No Read the rules. There is provision for laminated bats to be approved. The question was not "could they?", but rather "do they?". I don't know if any laminated bats have been approved, but I have a strong suspicion the answer is "no". todd |
MLB Bat Rules
In article , todd
wrote: The question was not "could they?", but rather "do they?". I don't know if any laminated bats have been approved, but I have a strong suspicion the answer is "no". The question (that you quoted) was "Does MLB allow glued up blanks for bats?". The rules state: "NOTE: No laminated or experimental bats shall be used in a professional game (either championship season or exhibition games) until the manufacturer has secured approval from the Rules Committee of his design and methods of manufacture." The answer to the question "Does MLB allow glued up blanks for bats?" is, therefore, "such bats are expressly allowed but require the approval of the Rules Committee". Quod erat demonstrandum. |
MLB Bat Rules
"Dave Balderstone" wrote in message
news:050420062301069921%dave@N_O_T_T_H_I_Sbalderst one.ca... In article , todd wrote: The question was not "could they?", but rather "do they?". I don't know if any laminated bats have been approved, but I have a strong suspicion the answer is "no". The question (that you quoted) was "Does MLB allow glued up blanks for bats?". The rules state: "NOTE: No laminated or experimental bats shall be used in a professional game (either championship season or exhibition games) until the manufacturer has secured approval from the Rules Committee of his design and methods of manufacture." The answer to the question "Does MLB allow glued up blanks for bats?" is, therefore, "such bats are expressly allowed but require the approval of the Rules Committee". Quod erat demonstrandum. Think about the original question. Someone wants to make a bat that complies with the current rules. Until such time as the rules committee says they are allowed, they are not allowed. So the answer for now is "no". todd |
MLB Bat Rules
In article , "Leon" wrote:
"Tom Watson" wrote in message .. . Does MLB allow glued up blanks for bats? Secondary question: Can the individual laminations be of different woods? Tertiary Question: If glue-ups are not allowed, what woods are allowed? Ash Actually, the rules don't say anything about the type of wood. Ash is most common, but it's certainly not the only thing permitted. IIRC, Babe Ruth used bats made of rock maple. -- Regards, Doug Miller (alphageek at milmac dot com) It's time to throw all their damned tea in the harbor again. |
MLB Bat Rules
|
MLB Bat Rules
"todd" wrote in message . .. Think about the original question. Someone wants to make a bat that complies with the current rules. Until such time as the rules committee says they are allowed, they are not allowed. So the answer for now is "no". That is assuming that the no laminated bats have been approved. There very well could be some laminated bats that are approved and being used. |
MLB Bat Rules
"Leon" wrote in message
m... "todd" wrote in message . .. Think about the original question. Someone wants to make a bat that complies with the current rules. Until such time as the rules committee says they are allowed, they are not allowed. So the answer for now is "no". That is assuming that the no laminated bats have been approved. There very well could be some laminated bats that are approved and being used. I stipulated this in an earlier post. Until someone brings evidence to the contrary, I'm assuming no laminated bats have been approved. Perhaps I'm being optimistic, but I would think that would have generated at least a mention on the sports radio stations I listen to. todd |
MLB Bat Rules
Tom,
"...not a fast enough lathe guy..." caught my attention. You already have the "word" on your original query: One piece. It doesn't take that long. I hadn't used my lathe in maybe 20-25 years when I happened to catch a New Yankee Workshop episode on lathe basics. My grandson -- then almost 8 -- asked if I had such a tool (he loves to watch with me, along with his little sister!). I did, and we went out to the shop to look it over. Norm Abram ended the show by turning a bat, then going out to Fenway Park where a big leaguer used it in batting practice and knocked one or two over the Green Monster. So...I go to the hardwood dealer, buy a bat billet, and turn a bat for my grandson. 29" length in exactly the same proportions as one of his aluminum bats. BIG mistake. First batting practice he cracked it! (I'm VERY proud of the guy!) The long, thin handle of an aluminum bat is too long, too thin, and creates a weak spot about where the diameter starts to grow to the barrel. So...another trip to the hardwood dealer, another billet, and now I pay attention to the shape of other wooden bats. It's heavier than the original, even though I made it only 28" long. Moral of the story, for the bat for your friend, is find out how long (and how heavy) he wants his bat, then find one that meets his needs and copy it. By the way, a gouge is a lot easier for me to use than a skew, so almost everything was done with a 3/4" gouge and a parting tool. I used a skew mostly for "smoothing" (along with sandpaper and a rasp). Jim Stuyck "Tom Watson" wrote in message ... Thanks, Doug. I want to make a bat as a present for a friend of mine who plays in a Senior league that abides by MLB rules. You kept me from being a little more creative than the rules apparently allow for. I'm not a fast enough lathe guy to waste time on the road not to be taken. Thanks again. On Thu, 06 Apr 2006 00:50:31 GMT, (Doug Miller) wrote: In article , Tom Watson wrote: Does MLB allow glued up blanks for bats? No. "1.10 (a) The bat shall be a smooth, round stick not more than 2 3/4 inches in diameter at the thickest part and not more than 42 inches in length. The bat shall be one piece of solid wood." http://www.mlb.com/NASApp/mlb/mlb/of...jectives_1.jsp Secondary question: Can the individual laminations be of different woods? n/a Tertiary Question: If glue-ups are not allowed, what woods are allowed? Anything you want. Rule 1.10 (d) prohibits the use of colored bats without prior approval, and I imagine that an umpire would look a bit askance at a bat made of, say, purpleheart, under that rule. But a strict reading of the rules would permit it. Regards, Tom Watson tjwatson1ATcomcastDOTnet (real email) http://home.comcast.net/~tjwatson1/ |
MLB Bat Rules
Bonds and serverla other elite players have been using hard maple
bats, custom made in Canada. Hickory is also used. Ash is the most common still. -Zz On Thu, 06 Apr 2006 02:55:13 GMT, "Leon" wrote: "Tom Watson" wrote in message .. . Does MLB allow glued up blanks for bats? Secondary question: Can the individual laminations be of different woods? Tertiary Question: If glue-ups are not allowed, what woods are allowed? Ash |
MLB Bat Rules
"Zz Yzx" wrote in message ... Bonds and serverla other elite players have been using hard maple bats, custom made in Canada. Hickory is also used. Ash is the most common still. -Zz On Thu, 06 Apr 2006 02:55:13 GMT, "Leon" wrote: "Tom Watson" wrote in message . .. Does MLB allow glued up blanks for bats? Secondary question: Can the individual laminations be of different woods? Tertiary Question: If glue-ups are not allowed, what woods are allowed? Ash Rules of baseball says it has to be one solid piece of wood. It makes no mention of the type of wood allowed -- so any, one supposes. |
MLB Bat Rules
You have to think that a bat made from purpleheart or zebrano or
karelian birch would look magnificent, but probably not be strong enough for anything but bunting. I note no mention of min/max weight - and I'm sure there must be. So although theoretically any wood could be used for a bat, some (like lignum vitae?) would probably be automatically excluded because of their heaviness. FoggyTown |
MLB Bat Rules
In article .com, "foggytown" wrote:
You have to think that a bat made from purpleheart or zebrano or karelian birch would look magnificent, but probably not be strong enough for anything but bunting. Purpleheart, at least, would surely be strong enough for a full swing at a Randy Johnson fastball. For bunting, one would want a bat that's nearly as "dead" as possible; cottonwood, basswood, and balsa spring to mind. I note no mention of min/max weight - and I'm sure there must be. Actually, there is neither a minimum nor maximum weight, only maximum diameter and maximum length. -- Regards, Doug Miller (alphageek at milmac dot com) It's time to throw all their damned tea in the harbor again. |
MLB Bat Rules
Doug Miller wrote: In article .com, "foggytown" wrote: You have to think that a bat made from purpleheart or zebrano or karelian birch would look magnificent, but probably not be strong enough for anything but bunting. Purpleheart, at least, would surely be strong enough for a full swing at a Randy Johnson fastball. For bunting, one would want a bat that's nearly as "dead" as possible; cottonwood, basswood, and balsa spring to mind. Maybe elm as it is lighter than most hardwoods but not prone to splitting. I've read that cricket bats are made from willow. I'd like to see a bat made from persimmon. -- FF |
MLB Bat Rules
wrote in message ups.com... I'd like to see a bat made from persimmon. Golf Ball Bat. ;~) Golf club "Woods" are often made from persimmon. |
| All times are GMT +1. The time now is 04:21 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter