Wood measurements
I bought some 3/4" plywood fir for a shelf in my cabinet. I was looking
for something to high the end bands. The store had lost of pine that looked abuot right but it was 1/2". So I kept going in circles between isles trying to find the 3/4" pine to put on the end of this plywood. After about an hour I decided to just grap the piece that looked right. Turns out the 1/2" solid wood is the same thickness as the 3/4" plywood. This wouldn't be the first odd measurement I have found like 3/4 is really 5/8... What am I missing here? -- Thank you, "Then said I, Wisdom [is] better than strength: nevertheless the poor man's wisdom [is] despised, and his words are not heard." Ecclesiastes 9:16 |
Wood measurements
It sounds to me like the 1/2" wood was mislabeled.
If you're looking for a piece of wood 3/4" thick, you should be buying 1" stock (sometimes called 4/4). They plane off exactly 1/4", leaving you with 3/4". Josh |
Wood measurements
Josh may be right about the mislabel. But ply's funny like that.
Depending on where it's from (You never said where you purchased it, but it sounded like the borg), 3/4 is more like 23/32nds, 1/2 is around 15/32nds (or 12 mm, now I'm getting confused). Bring a tape measure in with you the next time. You'll be surprised at the variables, even from sheet to sheet, sometimes. Tom |
Wood measurements
On Tue, 21 Feb 2006 09:01:38 -0500, dnoyeB
wrote: I bought some 3/4" plywood fir for a shelf in my cabinet. I was looking for something to high the end bands. The store had lost of pine that looked abuot right but it was 1/2". So I kept going in circles between isles trying to find the 3/4" pine to put on the end of this plywood. After about an hour I decided to just grap the piece that looked right. Turns out the 1/2" solid wood is the same thickness as the 3/4" plywood. This wouldn't be the first odd measurement I have found like 3/4 is really 5/8... What am I missing here? It is helpful to carry a measuring tape when shopping for lumber. Don't believe the tag. |
Wood measurements
"Phisherman" wrote in message ... On Tue, 21 Feb 2006 09:01:38 -0500, dnoyeB wrote: I bought some 3/4" plywood fir for a shelf in my cabinet. I was looking for something to high the end bands. The store had lost of pine that looked abuot right but it was 1/2". So I kept going in circles between isles trying to find the 3/4" pine to put on the end of this plywood. After about an hour I decided to just grap the piece that looked right. Turns out the 1/2" solid wood is the same thickness as the 3/4" plywood. This wouldn't be the first odd measurement I have found like 3/4 is really 5/8... What am I missing here? It is helpful to carry a measuring tape when shopping for lumber. Don't believe the tag. It is also useful to carry calipers in your pocket. This will give you a more accurate measurement of thickness. |
Wood measurements
Order edge banding from Woodworkers Supply, etc. Sand the edges nicely
and iron it on. It stands up surprisingly well and is easy to repair. Bugs |
Wood measurements
Lee Michaels wrote:
"Phisherman" wrote in message ... On Tue, 21 Feb 2006 09:01:38 -0500, dnoyeB wrote: I bought some 3/4" plywood fir for a shelf in my cabinet. I was looking for something to high the end bands. The store had lost of pine that looked abuot right but it was 1/2". So I kept going in circles between isles trying to find the 3/4" pine to put on the end of this plywood. After about an hour I decided to just grap the piece that looked right. Turns out the 1/2" solid wood is the same thickness as the 3/4" plywood. This wouldn't be the first odd measurement I have found like 3/4 is really 5/8... What am I missing here? It is helpful to carry a measuring tape when shopping for lumber. Don't believe the tag. It is also useful to carry calipers in your pocket. This will give you a more accurate measurement of thickness. I'll add: carry your FRACTIONAL calipers to the store. It's kinda a PITA to convert .237 to 32nds while shopping. :) Dave |
Wood measurements
Josh wrote:
It sounds to me like the 1/2" wood was mislabeled. If you're looking for a piece of wood 3/4" thick, you should be buying 1" stock (sometimes called 4/4). They plane off exactly 1/4", leaving you with 3/4". Josh Maybe that was it. I bought 1" wood and it matched the 3/4 plywood. Just dont know why it was labelled like that. I got it mostly at lowes. -- Thank you, "Then said I, Wisdom [is] better than strength: nevertheless the poor man's wisdom [is] despised, and his words are not heard." Ecclesiastes 9:16 |
Wood measurements
In article , dnoyeB wrote:
Josh wrote: It sounds to me like the 1/2" wood was mislabeled. If you're looking for a piece of wood 3/4" thick, you should be buying 1" stock (sometimes called 4/4). They plane off exactly 1/4", leaving you with 3/4". Josh Maybe that was it. I bought 1" wood and it matched the 3/4 plywood. Just dont know why it was labelled like that. I got it mostly at lowes. That's because wood is sold by its nominal dimensions, i.e. the dimensions before drying and surface-planing. If you buy 1-inch (four-quarter) rough-sawn lumber, you'll get lumber that is actually one inch thick, or pretty close to it. But when you're buying lumber that's already been surface-planed, nominal one-inch lumber has been planed down to a thickness of 3/4". The actual dimensions of a one-by-two are 3/4 by 1-1/2, a two-by-four is 1-1/2 by 3-1/2, and so on. -- Regards, Doug Miller (alphageek at milmac dot com) It's time to throw all their damned tea in the harbor again. |
All times are GMT +1. The time now is 12:24 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter