Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
I got off work early today due to rain. On the way home I stopped by
our local architectural salvage warehouse that recently opened just to have a look around. I explored rows and rows of surplus cabinets, doors, stair parts (etc etc)until I got to the dark back of the warehouse and spied a bunch of assorted lumber standing against the wall. I just had to pick through and see what was there. The first thing I moved was several stair treads. I thought "Damn, those things are heavy". I took one over to the light and brushed off the dust. No clue as to what kind of wood it was, but it looked *really* nice. Finally, I asked the guy working there about the wood. He said it's mahogany. I told him that I've worked with plenty of mahogany, and I didn't think it was mahogony, but that I didn't know what it was. He said they are $15 a piece.... Upon further digging through the pile, I pulled out a bunch of boards, at least 150 bdft, that were dark and *very* heavy, like the stair treads. They were all in the rough, most well over 12" wide, 10 ft. or so long and just shy of 2" thick. I still have no clue as to what kind of wood it is, but there was enough for a nice project. Soon, the guy returned again. I asked him if he'd take $100 for all the boards minus the stair treads. He agreed on the condition that I carried them out myself (he didn't want to lift those heavy things) so I started loading them up.... About the fifth board I carried (more like struggled) out to the truck I noticed some writing on the board in blue crayon. I brushed off the dust to reveal the word "JATOBA" WOOOO HOOOO! The other 5 boards were not so difficult to load! Damn, I'm still excited! --dave |
#2
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
"Dave Jackson" wrote in message ink.net... I got off work early today due to rain. On the way home I stopped by our local architectural salvage warehouse that recently opened just to have a look around. I explored rows and rows of surplus cabinets, doors, stair parts (etc etc)until I got to the dark back of the warehouse and spied a bunch of assorted lumber standing against the wall. I just had to pick through and see what was there. The first thing I moved was several stair treads. I thought "Damn, those things are heavy". I took one over to the light and brushed off the dust. No clue as to what kind of wood it was, but it looked *really* nice. Finally, I asked the guy working there about the wood. He said it's mahogany. I told him that I've worked with plenty of mahogany, and I didn't think it was mahogony, but that I didn't know what it was. He said they are $15 a piece.... Upon further digging through the pile, I pulled out a bunch of boards, at least 150 bdft, that were dark and *very* heavy, like the stair treads. They were all in the rough, most well over 12" wide, 10 ft. or so long and just shy of 2" thick. I still have no clue as to what kind of wood it is, but there was enough for a nice project. Soon, the guy returned again. I asked him if he'd take $100 for all the boards minus the stair treads. He agreed on the condition that I carried them out myself (he didn't want to lift those heavy things) so I started loading them up.... About the fifth board I carried (more like struggled) out to the truck I noticed some writing on the board in blue crayon. I brushed off the dust to reveal the word "JATOBA" WOOOO HOOOO! The other 5 boards were not so difficult to load! Damn, I'm still excited! --dave wasn't there a tornado somewhere in the country yesterday? i think you have it beat for suckage. |
#3
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
With all that suction, you're likely to change the weather. I hope you
get wet. .. .. .. .. .. .. .. .. .. .. congrats, tho.... |
#4
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
That really sucks Dave.
Stop by my house and I will gladly help you unload the wood. ;~) "Dave Jackson" wrote in message ink.net... I got off work early today due to rain. On the way home I stopped by our local architectural salvage warehouse that recently opened just to have a look around. I explored rows and rows of surplus cabinets, doors, stair parts (etc etc)until I got to the dark back of the warehouse and spied a bunch of assorted lumber standing against the wall. I just had to pick through and see what was there. The first thing I moved was several stair treads. I thought "Damn, those things are heavy". I took one over to the light and brushed off the dust. No clue as to what kind of wood it was, but it looked *really* nice. Finally, I asked the guy working there about the wood. He said it's mahogany. I told him that I've worked with plenty of mahogany, and I didn't think it was mahogony, but that I didn't know what it was. He said they are $15 a piece.... Upon further digging through the pile, I pulled out a bunch of boards, at least 150 bdft, that were dark and *very* heavy, like the stair treads. They were all in the rough, most well over 12" wide, 10 ft. or so long and just shy of 2" thick. I still have no clue as to what kind of wood it is, but there was enough for a nice project. Soon, the guy returned again. I asked him if he'd take $100 for all the boards minus the stair treads. He agreed on the condition that I carried them out myself (he didn't want to lift those heavy things) so I started loading them up.... About the fifth board I carried (more like struggled) out to the truck I noticed some writing on the board in blue crayon. I brushed off the dust to reveal the word "JATOBA" WOOOO HOOOO! The other 5 boards were not so difficult to load! Damn, I'm still excited! --dave |
#5
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Nope! - The blue crayon is the giveaway. That's the signature of a noted
tagger - Joe Jatoba - very well known in lumber circles. Don't feel bad - I'd be happy to take the stuff off your hands. OH! I almost forgot - you SUCK! Vic |
#6
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Congrats!
My $20 Wilton 7" bench vise doesn't seem like such a great find now. :-) |
#7
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Dave Jackson wrote:
[jatoba vacuum, sucked] Some people have life so easy... you suck. er (still looking for a cheap lumber source) -- email not valid |
#8
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Just think of all the stair treads you can make with that!
jc oh, you suck. snip of great gloat. |
#9
Posted to rec.woodworking
|
|||
|
|||
SUCK!!!SUCK!!!SUCK!!!
B.
|
#10
Posted to rec.woodworking
|
|||
|
|||
SUCK!!!SUCK!!!SUCK!!!
"Buddy Matlosz" wrote in message
... I couldn't have said it better myself! :-) -- Morris Dovey DeSoto Solar DeSoto, Iowa USA http://www.iedu.com/DeSoto |
#11
Posted to rec.woodworking
|
|||
|
|||
SUCK!!!SUCK!!!SUCK!!!
On Fri, 3 Feb 2006 20:43:02 -0500, "Buddy Matlosz"
wrote: B. ummm, care to expond on that? +--------------------------------------------------------------------------------+ If you're gonna be dumb, you better be tough +--------------------------------------------------------------------------------+ |
#12
Posted to rec.woodworking
|
|||
|
|||
SUCK!!!SUCK!!!SUCK!!!
On Fri, 03 Feb 2006 21:19:14 -0700, with neither quill nor qualm, Mark
& Juanita quickly quoth: On Fri, 3 Feb 2006 20:43:02 -0500, "Buddy Matlosz" wrote: B. ummm, care to expond on that? Expand or expound? I wonder if it's an advertisement. gd&r --------------------------------------------------- I drive way too fast to worry about my cholesterol. --------------------------------------------------- http://www.diversify.com Refreshing Graphic Design |
#13
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
On 2/3/2006 3:30 PM Dave Jackson mumbled something about the following:
I got off work early today due to rain. On the way home I stopped by our local architectural salvage warehouse that recently opened just to have a look around. I explored rows and rows of surplus cabinets, doors, stair parts (etc etc)until I got to the dark back of the warehouse and spied a bunch of assorted lumber standing against the wall. I just had to pick through and see what was there. The first thing I moved was several stair treads. I thought "Damn, those things are heavy". I took one over to the light and brushed off the dust. No clue as to what kind of wood it was, but it looked *really* nice. Finally, I asked the guy working there about the wood. He said it's mahogany. I told him that I've worked with plenty of mahogany, and I didn't think it was mahogony, but that I didn't know what it was. He said they are $15 a piece.... Upon further digging through the pile, I pulled out a bunch of boards, at least 150 bdft, that were dark and *very* heavy, like the stair treads. They were all in the rough, most well over 12" wide, 10 ft. or so long and just shy of 2" thick. I still have no clue as to what kind of wood it is, but there was enough for a nice project. Soon, the guy returned again. I asked him if he'd take $100 for all the boards minus the stair treads. He agreed on the condition that I carried them out myself (he didn't want to lift those heavy things) so I started loading them up.... About the fifth board I carried (more like struggled) out to the truck I noticed some writing on the board in blue crayon. I brushed off the dust to reveal the word "JATOBA" WOOOO HOOOO! The other 5 boards were not so difficult to load! Damn, I'm still excited! --dave You suck majorly. -- Odinn RCOS #7 SENS BS ??? "The more I study religions the more I am convinced that man never worshiped anything but himself." -- Sir Richard Francis Burton Reeky's unofficial homepage ... http://www.reeky.org '03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide '97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic Atlanta Biker Net ... http://www.atlantabiker.net Vulcan Riders Assoc . http://www.vulcanriders.org rot13 to reply |
#14
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Dave Jackson wrote:
[snip of suckage reporting] Remember to use a quality primer before you paint this stuff... :-) j4 |
#15
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
jo4hn wrote:
Dave Jackson wrote: [snip of suckage reporting] Remember to use a quality primer before you paint this stuff... Why would he waste his time painting firewood? |
#16
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
"Odinn" wrote in message About the fifth board I carried (more like struggled) out to the truck I noticed some writing on the board in blue crayon. I brushed off the dust to reveal the word "JATOBA" WOOOO HOOOO! The other 5 boards were not so difficult to load! Damn, I'm still excited! --dave Yeah, but by the time you cut it all, you'll have to spend 10 bucks to get your blade sharpened. You suck big time. |
#18
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Yeah, but by the time you cut it all, you'll have to spend 10 bucks to get your blade sharpened. You suck big time. Might be a good idea to get several blades from HF? Costs less than the sharpening no doubt, $4 a tooth where I am. The adult ed. shop I attend just installed a new 12" HF carbide blade to the RAS (a huge old Delta), teacher said it cuts beautifully compared to the old blade, which was tearing out the lower edge of the cut, nasty. http://www.harborfreight.com/cpi/cta...emnumber=38545 -- Alex - "newbie_neander" woodworker cravdraa_at-yahoo_dot-com not my site: http://www.e-sword.net/ |
#19
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Unquestionably Confused wrote: jo4hn wrote: Dave Jackson wrote: [snip of suckage reporting] Remember to use a quality primer before you paint this stuff... Why would he waste his time painting firewood? Firewood!!!! No way I'd burn good framing lumber like that! Bryan |
#20
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
AAvK wrote: Might be a good idea to get several blades from HF? Costs less than the sharpening no doubt, $4 a tooth where I am. Your saying it would cost more to have a 60 tooth blade sharpened than it would cost to buy a couple of Forrest WWIIs? Where do you live? I want to open some businesses there. ktc |
#21
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Your saying it would cost more to have a 60 tooth blade sharpened than it would cost to buy a couple of Forrest WWIIs? Where do you live? I want to open some businesses there. ktc 'Bout 90 miles north from Los Angeles on the coast. Drop on by then. But you wouldn't like the prices of lumber here, you pay out the nose for shipping to the west coast. $6.95 to $16.xx b/f for hard maple. I spoze I coulda been wrong though... that price was mentioned to me by them about sharpening a dado set, he could've meant the inner cutters. -- Alex - "newbie_neander" woodworker cravdraa_at-yahoo_dot-com not my site: http://www.e-sword.net/ |
#22
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Hey all,
Not to worry, I bought the WWII to use it. In fact, I was concerned about my old Rockwell contractors saw (only 1 1/2 hp) being able to handle that thick Jatoba. I've had problems with it in bogging down with some North American hardwoods, especially thicker Oak, but, to my surprise, it did just fine - never missed a beat. I credit that to the recently purchased WWII. My jointer and planer on the other hand do not like Jatoba. There is a noticeable drop in RPM's when I machine it. My new DW 718 SCMS also drops a little in RPM's as well, but the wood does ultimately machine very nicely. Furthermore, I think this wood will require me to break out and sharpen my neander tools (i.e. cabinet scrapers) to do the final finish work. Somehow I think the ROS just wont do it justice. This stuff has been a real pleasure to work with so far except it's damn heavy. --dave "AAvK" wrote in message news:tifFf.12601$eR.11625@fed1read03... Your saying it would cost more to have a 60 tooth blade sharpened than it would cost to buy a couple of Forrest WWIIs? Where do you live? I want to open some businesses there. ktc 'Bout 90 miles north from Los Angeles on the coast. Drop on by then. But you wouldn't like the prices of lumber here, you pay out the nose for shipping to the west coast. $6.95 to $16.xx b/f for hard maple. I spoze I coulda been wrong though... that price was mentioned to me by them about sharpening a dado set, he could've meant the inner cutters. -- Alex - "newbie_neander" woodworker cravdraa_at-yahoo_dot-com not my site: http://www.e-sword.net/ |
#23
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
AAvK wrote:
'Bout 90 miles north from Los Angeles on the coast. Drop on by then. But you wouldn't like the prices of lumber here, you pay out the nose for shipping to the west coast. $6.95 to $16.xx b/f for hard maple. I spoze I coulda been wrong though... that price was mentioned to me by them about sharpening a dado set, he could've meant the inner cutters. I'm almost sure you can get a reasonable quote from a distributor in LA. I'm talking with one here in SD, and they are chopping nice chunks off the price when I told them I could find better prices online and the shipping charges are only $100 (approx.) for the 200bf I'm asking bids for. er -- email not valid |
#24
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
On Sat, 04 Feb 2006 17:02:22 GMT, Unquestionably Confused
wrote: jo4hn wrote: Dave Jackson wrote: [snip of suckage reporting] Remember to use a quality primer before you paint this stuff... Why would he waste his time painting firewood? lights easier? mac Please remove splinters before emailing |
#25
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
On Sat, 4 Feb 2006 10:56:30 -0800, "AAvK" wrote:
Yeah, but by the time you cut it all, you'll have to spend 10 bucks to get your blade sharpened. You suck big time. Might be a good idea to get several blades from HF? Costs less than the sharpening no doubt, $4 a tooth where I am. The adult ed. shop I attend just installed a new 12" HF carbide blade to the RAS (a huge old Delta), teacher said it cuts beautifully compared to the old blade, which was tearing out the lower edge of the cut, nasty. http://www.harborfreight.com/cpi/cta...emnumber=38545 I'll admit it, Arch.. I never sharpen blades... I keep 3 or 4 of the HF blades around, stock up when on sale, etc... They cut very well for a while, then when they start to dull, I chuck them into the recycle bin and put another $8 blade in... works for my uses.. (of course, since I got the turning bug over a year ago, I can't find my saw anyway... lol ) mac Please remove splinters before emailing |
#26
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
"mac davis" wrote in message Might be a good idea to get several blades from HF? Costs less than the sharpening no doubt, $4 a tooth where I am. The adult ed. shop I attend just installed a new 12" HF carbide blade to the RAS (a huge old Delta), teacher said it cuts beautifully compared to the old blade, which was tearing out the lower edge of the cut, nasty. http://www.harborfreight.com/cpi/cta...emnumber=38545 I'll admit it, Arch.. I never sharpen blades... I keep 3 or 4 of the HF blades around, stock up when on sale, etc... They cut very well for a while, then when they start to dull, I chuck them into the recycle bin and put another $8 blade in... works for my uses.. Four bucks a tooth is outrageous. http://www.ridgecarbidetool.com/html/sharpening.htm 40T blade is $14. They do all brands. My DeWalt for the CMS came back better than new. My experience with cheap blades is that they just don't leave a nice finish when needed. May be OK for cutting some frame work, but not for furniture grade applications. |
#27
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
"mac davis" wrote in message ... On Sat, 04 Feb 2006 17:02:22 GMT, Unquestionably Confused wrote: jo4hn wrote: Dave Jackson wrote: [snip of suckage reporting] Remember to use a quality primer before you paint this stuff... Why would he waste his time painting firewood? lights easier? Wider choice of colors? B. |
#28
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Unquestionably Confused wrote:
jo4hn wrote: Dave Jackson wrote: [snip of suckage reporting] Remember to use a quality primer before you paint this stuff... Why would he waste his time painting firewood? Well, it certainly won't match his oak firewood if he tries to _stain_ them both, now will it? - Brooks -- The "bmoses-nospam" address is valid; no unmunging needed. |
#29
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
Do share, I've beem quoted quite a bit more for shipping in those
quantities to the PNW.. Alan |
#30
Posted to rec.woodworking
|
|||
|
|||
GLOAT!!!GLOAT!!!GLOAT!!!
arw01 wrote:
Do share, I've beem quoted quite a bit more for shipping in those quantities to the PNW.. Well, I've been using a total from woodworkerssource (?) as encouragement for the local distributors. Even with their current sale on domestic woods they are putting pressure on them. What they can't do is let me pick through their stock. Mind you, it may be cheaper to buy wood living in Washington than here in SD. er -- email not valid |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|