I look for a 14' bandsaw. I saw that Craftman professional and Ridgid seem
to be the same. Is this the same thing?

S.B.

I was pretty amazed that Craftsman or Ridgid would make a 14 foot
bandsaw (14' in OP), and when I checked HD's website to look at the
Ridgid, apparently it's true! Check it out - "smooth running belt
drive that delivers power to resaw up to 6 Ft.' thick oak."
http://www.homedepot.com/prel80/HDUS...4+3966&pos=n24
Hey - if you can get 6 foot resaw capacity, go for it. If not, you
might check out Grizzly.com - their 14" Ultimate Bandsaw appears to be
a better deal for less $ than either of the ones you mentioned, and
it's built in an ISO9001 factory.
Good luck,
Andy

"Andy" wrote in message
ups.com...
I was pretty amazed that Craftsman or Ridgid would make a 14 foot
bandsaw (14' in OP), and when I checked HD's website to look at the
Ridgid, apparently it's true! Check it out - "smooth running belt
drive that delivers power to resaw up to 6 Ft.' thick oak."

Pot calling the kettle black...
On my computer it says 6", not 6'.

Bummer. Oh, well - if you have 6 foot wide boards to resaw, you'd
better not be shopping for those kind of tools at Home Depot.
As far as the original question, the bases and motors on the Craftsman
and Ridgid look completely different, at least on their respective
websites. And by the way, no affiliation with any of these
companies...
Andy

Toller wrote:
"Andy" wrote in message
ups.com...
I was pretty amazed that Craftsman or Ridgid would make a 14 foot
bandsaw (14' in OP), and when I checked HD's website to look at the
Ridgid, apparently it's true! Check it out - "smooth running belt
drive that delivers power to resaw up to 6 Ft.' thick oak."

Pot calling the kettle black...
On my computer it says 6", not 6'.

On mine it says:

3/4 HP TEFC Induction motor for quiet, smooth running belt drive that
delivers power to resaw up to 6 Ft.' thick oak.

in two (2) different places on this page:

http://www.homedepot.com/prel80HDUS/...rchResults.jsp

--

FF

wrote in message
oups.com...

Toller wrote:
"Andy" wrote in message
ups.com...
I was pretty amazed that Craftsman or Ridgid would make a 14 foot
bandsaw (14' in OP), and when I checked HD's website to look at the
Ridgid, apparently it's true! Check it out - "smooth running belt
drive that delivers power to resaw up to 6 Ft.' thick oak."

Pot calling the kettle black...
On my computer it says 6", not 6'.

On mine it says:

3/4 HP TEFC Induction motor for quiet, smooth running belt drive that
delivers power to resaw up to 6 Ft.' thick oak.

in two (2) different places on this page:

http://www.homedepot.com/prel80HDUS/...rchResults.jsp

You need a better monitor. On mine they are clearly inch symbols.

Toller wrote:
wrote in message
oups.com...

Toller wrote:
"Andy" wrote in message
ups.com...
I was pretty amazed that Craftsman or Ridgid would make a 14 foot
bandsaw (14' in OP), and when I checked HD's website to look at the
Ridgid, apparently it's true! Check it out - "smooth running belt
drive that delivers power to resaw up to 6 Ft.' thick oak."

Pot calling the kettle black...
On my computer it says 6", not 6'.

On mine it says:

3/4 HP TEFC Induction motor for quiet, smooth running belt drive that
delivers power to resaw up to 6 Ft.' thick oak.

in two (2) different places on this page:

http://www.homedepot.com/prel80HDUS/...rchResults.jsp

You need a better monitor. On mine they are clearly inch symbols.

First of all, I copied and pasted the text so the ASCII symbols posted
to USeNet are the same as the ASCII symbols on the webpage.

Secondly, Are we to undersstand that on your monitor the symbol
for 'inch' is 'Ft'? That's a very peculiar monitor.

--

FF

"Toller" wrote in :

You need a better monitor. On mine they are clearly inch symbols

Hm. My 21" Philips clearly shows the text as 6Ft' -- note the single
quote. In two seperate places.

This is for the Ridgid BS1400 bandsaw ...

Maybe we are looking at two different things? Don't know, but it's very
clearly indicating "Feet" as the unit of measure for resaw capability.
--
Regards,

JT
Speaking only for myself....

A few years ago, an article in Forbes magazine said that Home Depot had
out-maneuvered Sears and started used the Craftsman OEM (Emerson) to
manufacture tools, putting them under the Ridgid logo. The Ridgid tablesaw
that I bought at that time sure looked like the earlier Craftsman items --
in fact, HD was giving a $100 trade-in to everyone who turned in a Sears
tablesaw and bought a Ridgid. This forced Sears to go to a new supplier.

The Ridgid line of tools uses the name from Ridge Road plumbing supplies,
with HD manipulating things behind the scenes. (HD did a similar operation
for a couple of years in the '90s, when they started to market lawn tractors
built by John Deere, under the "Scotts" logo.)

So the "new" Ridgid came from the manufacturer of the "old" Craftsman . . .
or so I've read -- Regards --

"SBO" wrote in message
news
I look for a 14' bandsaw. I saw that Craftman professional and Ridgid seem
to be the same. Is this the same thing?

S.B.

Very true! Emerson Electric now manufactures the Rigid line for HD
(although I hope to better standards and specifications) At least
they did a good job with the new contractor's saw.

Sears went searching for a new supplier. The found Ryobi. I'll leave
the quality discussion up to you.

SS



On Mon, 10 Oct 2005 23:01:32 GMT, "World Traveler"
wrote:

A few years ago, an article in Forbes magazine said that Home Depot had
out-maneuvered Sears and started used the Craftsman OEM (Emerson) to
manufacture tools, putting them under the Ridgid logo. The Ridgid tablesaw
that I bought at that time sure looked like the earlier Craftsman items --
in fact, HD was giving a $100 trade-in to everyone who turned in a Sears
tablesaw and bought a Ridgid. This forced Sears to go to a new supplier.

The Ridgid line of tools uses the name from Ridge Road plumbing supplies,
with HD manipulating things behind the scenes. (HD did a similar operation
for a couple of years in the '90s, when they started to market lawn tractors
built by John Deere, under the "Scotts" logo.)

So the "new" Ridgid came from the manufacturer of the "old" Craftsman . . .
or so I've read -- Regards --

"SBO" wrote in message
news
I look for a 14' bandsaw. I saw that Craftman professional and Ridgid seem
to be the same. Is this the same thing?

S.B.

nospam wrote:
Very true! Emerson Electric now manufactures the Rigid line for HD
(although I hope to better standards and specifications) At least
they did a good job with the new contractor's saw.

Sears went searching for a new supplier. The found Ryobi. I'll leave
the quality discussion up to you.



Now you have me confused. I read in this NG about a year or so ago
that Emerson had stopped making stationary power tools for the Ridge
Tool Company (which are marketed through HD) and that now they are
made by Ryobi.

--

FF

wrote in message
oups.com...
..

I read in this NG about a year or so ago that Emerson had stopped making
stationary power tools for the Ridge Tool Company (which are marketed
through HD) and that now they are
made by Ryobi.

I believe you are right. Sears and Ryobi split the sheets about a year ago.
I'm not sure who took over for Sears. RM~

On 11 Oct 2005 14:35:37 -0700, wrote:


nospam wrote:
Very true! Emerson Electric now manufactures the Rigid line for HD
(although I hope to better standards and specifications) At least
they did a good job with the new contractor's saw.

Sears went searching for a new supplier. The found Ryobi. I'll leave
the quality discussion up to you.



Now you have me confused. I read in this NG about a year or so ago
that Emerson had stopped making stationary power tools for the Ridge
Tool Company (which are marketed through HD) and that now they are
made by Ryobi.

not sure how you spell it, but I was told here (this ng) that the ridgid and
grizzly are both made by the "elephant" company in China and are identical...

this would seem logical, since I put a grizzly riser block kit on my ridgid saw
and it works fine... YM (and spelling)MV


mac

Please remove splinters before emailing

On Wed, 12 Oct 2005 08:50:07 -0700, mac davis
wrote:

On 11 Oct 2005 14:35:37 -0700, wrote:


nospam wrote:
Very true! Emerson Electric now manufactures the Rigid line for HD
(although I hope to better standards and specifications) At least
they did a good job with the new contractor's saw.

Sears went searching for a new supplier. The found Ryobi. I'll leave
the quality discussion up to you.



Now you have me confused. I read in this NG about a year or so ago
that Emerson had stopped making stationary power tools for the Ridge
Tool Company (which are marketed through HD) and that now they are
made by Ryobi.

not sure how you spell it, but I was told here (this ng) that the ridgid and
grizzly are both made by the "elephant" company in China and are identical...

this would seem logical, since I put a grizzly riser block kit on my ridgid saw
and it works fine... YM (and spelling)MV


mac

Please remove splinters before emailing


since pretty much all of the 14" bandsaws on the market now are clones
of the old delta design, it wouldn't be surprising if any of the riser
kits fit any of the saws.

On Mon, 10 Oct 2005 23:01:32 GMT, "World Traveler" wrote:

A few years ago, an article in Forbes magazine said that Home Depot had
out-maneuvered Sears and started used the Craftsman OEM (Emerson) to
manufacture tools, putting them under the Ridgid logo. The Ridgid tablesaw
that I bought at that time sure looked like the earlier Craftsman items --
in fact, HD was giving a $100 trade-in to everyone who turned in a Sears
tablesaw and bought a Ridgid. This forced Sears to go to a new supplier.

The Ridgid line of tools uses the name from Ridge Road plumbing supplies,
with HD manipulating things behind the scenes. (HD did a similar operation
for a couple of years in the '90s, when they started to market lawn tractors
built by John Deere, under the "Scotts" logo.)

So the "new" Ridgid came from the manufacturer of the "old" Craftsman . . .
or so I've read -- Regards --

"SBO" wrote in message
news
I look for a 14' bandsaw. I saw that Craftman professional and Ridgid seem
to be the same. Is this the same thing?

S.B.


As I understand it, the ridged and grizzly 14" BS's are identical and made by
the chiwanese... the craftsman doesn't look anything like my ridged, except for
the size of the wheels..



mac

Please remove splinters before emailing

mac davis wrote:
On Mon, 10 Oct 2005 23:01:32 GMT, "World Traveler" wrote:

A few years ago, an article in Forbes magazine said that Home Depot had
out-maneuvered Sears and started used the Craftsman OEM (Emerson) to
manufacture tools, putting them under the Ridgid logo. The Ridgid tablesaw
that I bought at that time sure looked like the earlier Craftsman items --
in fact, HD was giving a $100 trade-in to everyone who turned in a Sears
tablesaw and bought a Ridgid. This forced Sears to go to a new supplier.

As I understand it, the ridged and grizzly 14" BS's are identical and made by
the chiwanese... the craftsman doesn't look anything like my ridged, except
for the size of the wheels..


You guys are driving me CRAZY !!!! Learn how to spell the name. If it ain't
"rigid"... it needs some Viagra. If it ain't "ridged", it must be flat. If it
ain't "Ridgid", it must be a Grizzly.

R-I-D-G-I-D. R-I-D-G-I-D. Got that?

Go look at your tool if you own one as you claim. Or go look at your tool if
you have one as you claim. If it's rigid, see your wife for assistance.



The Spelling Police

On Tue, 11 Oct 2005 17:23:34 GMT, "The Spelling Police"
wrote:

mac davis wrote:
On Mon, 10 Oct 2005 23:01:32 GMT, "World Traveler" wrote:

A few years ago, an article in Forbes magazine said that Home Depot had
out-maneuvered Sears and started used the Craftsman OEM (Emerson) to
manufacture tools, putting them under the Ridgid logo. The Ridgid tablesaw
that I bought at that time sure looked like the earlier Craftsman items --
in fact, HD was giving a $100 trade-in to everyone who turned in a Sears
tablesaw and bought a Ridgid. This forced Sears to go to a new supplier.

As I understand it, the ridged and grizzly 14" BS's are identical and made by
the chiwanese... the craftsman doesn't look anything like my ridged, except
for the size of the wheels..


You guys are driving me CRAZY !!!! Learn how to spell the name. If it ain't
"rigid"... it needs some Viagra. If it ain't "ridged", it must be flat. If it
ain't "Ridgid", it must be a Grizzly.

R-I-D-G-I-D. R-I-D-G-I-D. Got that?

Go look at your tool if you own one as you claim. Or go look at your tool if
you have one as you claim. If it's rigid, see your wife for assistance.



The Spelling Police

take your meds and go back to your corner...


mac

Please remove splinters before emailing

"mac davis" wrote in message

wrote:
R-I-D-G-I-D. R-I-D-G-I-D. Got that?

Go look at your tool if you own one as you claim. Or go look at your tool
if
you have one as you claim. If it's rigid, see your wife for assistance.



The Spelling Police

take your meds and go back to your corner...


mac

Hey, go easy on him. He's probably a Virgo and life is tough when you see
things out of order like that. Bad spelling is worse than coloring outside
the lines.