Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Finding compatible woods for laminating
I did an earlier post with this question which got no replies. As this group
is usually excellent at providing help, I thought my earlier subject line might have been confusing so I will try one more time. If you read the first post and couldn't help and are now reading this one, I apologize for posting twice. I would like to make a decorative tapestry hanger in the form of a dowel. I have mahogany but I want to make a laminate with a dark wood in the center so that I end up with a mahogany dowel with a dark stripe in it. Can anyone recommend a resource I can use to learn what compatible dark wood I can glue up with mahogany so that the dowel won't split later? I'm not sure if I should be looking at shrinkage characteristics of the two woods and if so, just how close do the shrinkage charteristics of the mahogany and the darker wood have to be to each other? TIA. Dick Snyder |
#2
|
|||
|
|||
Dick Snyder wrote:
I did an earlier post with this question which got no replies. As this group is usually excellent at providing help, I thought my earlier subject line might have been confusing so I will try one more time. If you read the first post and couldn't help and are now reading this one, I apologize for posting twice. I would like to make a decorative tapestry hanger in the form of a dowel. I have mahogany but I want to make a laminate with a dark wood in the center so that I end up with a mahogany dowel with a dark stripe in it. Can anyone recommend a resource I can use to learn what compatible dark wood I can glue up with mahogany so that the dowel won't split later? I'm not sure if I should be looking at shrinkage characteristics of the two woods and if so, just how close do the shrinkage charteristics of the mahogany and the darker wood have to be to each other? Use anything and quit worrying about it...nothing is going to happen. -- dadiOH ____________________________ dadiOH's dandies v3.06... ....a help file of info about MP3s, recording from LP/cassette and tips & tricks on this and that. Get it at http://mysite.verizon.net/xico |
#3
|
|||
|
|||
On Wed, 5 Oct 2005 07:12:30 -0400, "Dick Snyder"
wrote: I did an earlier post with this question which got no replies. As this group is usually excellent at providing help, I thought my earlier subject line might have been confusing so I will try one more time. If you read the first post and couldn't help and are now reading this one, I apologize for posting twice. I would like to make a decorative tapestry hanger in the form of a dowel. I have mahogany but I want to make a laminate with a dark wood in the center so that I end up with a mahogany dowel with a dark stripe in it. Can anyone recommend a resource I can use to learn what compatible dark wood I can glue up with mahogany so that the dowel won't split later? I'm not sure if I should be looking at shrinkage characteristics of the two woods and if so, just how close do the shrinkage charteristics of the mahogany and the darker wood have to be to each other? TIA. Dick Snyder mahogany is an imprecise term. there are a gajillion woods called mahogany, ranging from stuff the color of white pine to stuff as dark as black walnut. since you want a dark stripe in the middle of your mahogany, I'll assume you have one of the lighter varieties. those are generally pretty soft lauan type woods from the asian tropics. since the center dark stripe is sandwiched by 2 layers of lighter woods, it has balanced forces. this is a pretty forgiving arrangement. you can pretty much use whatever you want or can afford. the biggest thing you can do to avoid warping after glueup is store the woods together for a couple of weeks before you proceed. |
#4
|
|||
|
|||
Thanks for the suggestion. I will buy the dark wood and store in the room in
which the end product is to be finally located for a couple of weeks. Dick Snyder wrote in message ... On Wed, 5 Oct 2005 07:12:30 -0400, "Dick Snyder" wrote: I did an earlier post with this question which got no replies. As this group is usually excellent at providing help, I thought my earlier subject line might have been confusing so I will try one more time. If you read the first post and couldn't help and are now reading this one, I apologize for posting twice. I would like to make a decorative tapestry hanger in the form of a dowel. I have mahogany but I want to make a laminate with a dark wood in the center so that I end up with a mahogany dowel with a dark stripe in it. Can anyone recommend a resource I can use to learn what compatible dark wood I can glue up with mahogany so that the dowel won't split later? I'm not sure if I should be looking at shrinkage characteristics of the two woods and if so, just how close do the shrinkage charteristics of the mahogany and the darker wood have to be to each other? TIA. Dick Snyder mahogany is an imprecise term. there are a gajillion woods called mahogany, ranging from stuff the color of white pine to stuff as dark as black walnut. since you want a dark stripe in the middle of your mahogany, I'll assume you have one of the lighter varieties. those are generally pretty soft lauan type woods from the asian tropics. since the center dark stripe is sandwiched by 2 layers of lighter woods, it has balanced forces. this is a pretty forgiving arrangement. you can pretty much use whatever you want or can afford. the biggest thing you can do to avoid warping after glueup is store the woods together for a couple of weeks before you proceed. |
#5
|
|||
|
|||
Screwed up my earlier post - I meant I will store both the dark wood and the
mahogany in the room where I plan to have the tapestry hanger (my living room) for a couple of weeks. wrote in message ... On Wed, 5 Oct 2005 07:12:30 -0400, "Dick Snyder" wrote: I did an earlier post with this question which got no replies. As this group is usually excellent at providing help, I thought my earlier subject line might have been confusing so I will try one more time. If you read the first post and couldn't help and are now reading this one, I apologize for posting twice. I would like to make a decorative tapestry hanger in the form of a dowel. I have mahogany but I want to make a laminate with a dark wood in the center so that I end up with a mahogany dowel with a dark stripe in it. Can anyone recommend a resource I can use to learn what compatible dark wood I can glue up with mahogany so that the dowel won't split later? I'm not sure if I should be looking at shrinkage characteristics of the two woods and if so, just how close do the shrinkage charteristics of the mahogany and the darker wood have to be to each other? TIA. Dick Snyder mahogany is an imprecise term. there are a gajillion woods called mahogany, ranging from stuff the color of white pine to stuff as dark as black walnut. since you want a dark stripe in the middle of your mahogany, I'll assume you have one of the lighter varieties. those are generally pretty soft lauan type woods from the asian tropics. since the center dark stripe is sandwiched by 2 layers of lighter woods, it has balanced forces. this is a pretty forgiving arrangement. you can pretty much use whatever you want or can afford. the biggest thing you can do to avoid warping after glueup is store the woods together for a couple of weeks before you proceed. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
raw land -- finding the place that works | Home Ownership | |||
compatible IC for Holtek HT7713B | Electronics Repair | |||
Common woods vs. Exotic Woods (Teak, etc) | Woodworking | |||
Exotic burl turning woods | Woodturning | |||
exotic woods | Woodworking |