DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   How To Make Treated Lumber (https://www.diybanter.com/woodworking/120490-how-make-treated-lumber.html)

[email protected] September 12th 05 02:49 AM

How To Make Treated Lumber
 
I'm getting ready to cut my own lumber from trees and I want to use the
lumber for an outside project. What can I do to make the lumber
survive outside? Can I make my own treated lumber?

Thanks,
Dale


David September 12th 05 03:30 AM

wrote:

I'm getting ready to cut my own lumber from trees and I want to use the
lumber for an outside project. What can I do to make the lumber
survive outside? Can I make my own treated lumber?

Thanks,
Dale

no

CW September 12th 05 04:00 AM

Sure you can. If it is made commercially, you can make it too. How much
money have you got? The equipment could be a might bit expensive.

"David" wrote in message
...
wrote:

I'm getting ready to cut my own lumber from trees and I want to use the
lumber for an outside project. What can I do to make the lumber
survive outside? Can I make my own treated lumber?

Thanks,
Dale

no




Bruce Barnett September 12th 05 12:32 PM

" writes:

I'm getting ready to cut my own lumber from trees and I want to use the
lumber for an outside project. What can I do to make the lumber
survive outside? Can I make my own treated lumber?


Depend. Do you like working with Arsenic?

--
Sending unsolicited commercial e-mail to this account incurs a fee of
$500 per message, and acknowledges the legality of this contract.

RayV September 12th 05 01:39 PM

If you live in Manville NJ you can just lay the lumber in your
backyard. The creosote in the ground will leech into the lumber.

Other than that I don't think so.


Gus September 12th 05 02:39 PM

wrote:
I'm getting ready to cut my own lumber from trees and I want to use the
lumber for an outside project. What can I do to make the lumber
survive outside? Can I make my own treated lumber?



No, you really can't make your own.

It takes lots of heat, pressure, nasty chemicals and expensive
equipment.

On the other hand, there are many naturally rot-resistant woods - cedar
and cypress, for example.

There are also coatings you can use to reduce the damaging effects of
the sun. I like Flood's CWF-UV.

To help prevent water absortion into end grain, you can do something as
simple as soaking the end of the wood in used motor oil.

These are many methods. I'm sure you'll be able to find one that works
for you.

Gus


Larry Jaques September 12th 05 02:51 PM

On 11 Sep 2005 18:49:16 -0700, with neither quill nor qualm,
" quickly quoth:

I'm getting ready to cut my own lumber from trees and I want to use the
lumber for an outside project. What can I do to make the lumber
survive outside? Can I make my own treated lumber?


Cut only black locust, cedar, redwood, or cypress trees for outside
lumber.

Or take your cut pineywood to a kiln who will pressure-treat it for
you. That should be a good trick!

--
Never ascribe to malice that which can
be adequately explained by stupidity.
---------------
www.diversify.com -- Smart Website Design

A Lurker September 12th 05 04:15 PM

"RayV" wrote in news:1126528752.842537.174880
@g49g2000cwa.googlegroups.com:

If you live in Manville NJ you can just lay the lumber in your
backyard. The creosote in the ground will leech into the lumber.

Other than that I don't think so.



That is blatantly NOT TRUE! The asbestos fibers in the ground
contamination soaked up all the creosote years ago!

Leon September 12th 05 04:15 PM


wrote in message
ps.com...
I'm getting ready to cut my own lumber from trees and I want to use the
lumber for an outside project. What can I do to make the lumber
survive outside? Can I make my own treated lumber?

Thanks,
Dale


It would probably be many many times cheaper to simply buy the wood that
meets you specifications.



[email protected] September 12th 05 06:31 PM


wrote:
I'm getting ready to cut my own lumber from trees


I should hope so as it would be peculiar to make lumber from
anything else...

and I want to use the
lumber for an outside project. What can I do to make the lumber
survive outside? Can I make my own treated lumber?


Farmers have been doing it for their fenceposts for centuries.
Of course they planned ahead and planted rot-resistant wood
like black locust or osage orange.

--

FF


Chris September 12th 05 06:47 PM


"A Lurker" wrote in message
...
"RayV" wrote in news:1126528752.842537.174880
@g49g2000cwa.googlegroups.com:

If you live in Manville NJ you can just lay the lumber in your
backyard. The creosote in the ground will leech into the lumber.

Other than that I don't think so.



That is blatantly NOT TRUE! The asbestos fibers in the ground
contamination soaked up all the creosote years ago!


Which exit is that located ? :)


--
Chris

If you can read this, thank a teacher. If it is in English, thank a
soldier. If it is in ebonics, thank your Congressman.



RayV September 12th 05 07:03 PM

Exit 10 to 287 N

Follow the glow from there


Chris September 12th 05 07:12 PM


"RayV" wrote in message
oups.com...
Exit 10 to 287 N

Follow the glow from there

Got it.

Is that not the toll booth that hands out MSDSs after you pay the toll?





All times are GMT +1. The time now is 11:50 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter