Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
J T
 
Posts: n/a
Default REPEATING CROSSBOW

http://www.vintageprojects.com/outdo...bow-plans.html

And, no, it's not a Chinese repeating crossbow.



JOAT
Yes, it's my truck. No, I won''t help you move.
- Seen on a bumper sticker

  #2   Report Post  
RonB
 
Posts: n/a
Default

Brings back memories. When I was young (a LONG time ago) my parents gave me
a copy of "The Boy Mechanic" which was published by Popular Mechanics. The
hardback book was vintage 1950's or early 60's but many of the projects
obviously dated into the 30's and 40's. It included many projects and
experiments that blanketed the spectrum from flight, sidewalk coaster cars,
photography, sail boats/iceboats, electrical projects and some archery
related projects such as shown on the link.

I also recall some projects that were well out of the "Boy" category. Not
the least of which was a fully enclosed and streamlined engine/propellor
driven iceboat that was capable of speeds over 70mph. I wonder how many
mothers found their boys building one of these?

It was probably books like these that developed a need to tinker and make
sawdust.

RonB


  #4   Report Post  
DamnYankee
 
Posts: n/a
Default

I thought the "arrows" were called "bolts" when used in a crossbow.
Plans call them "quarrels"? Never heard that term before.

Bryan

  #5   Report Post  
Juergen Hannappel
 
Posts: n/a
Default

"DamnYankee" writes:

I thought the "arrows" were called "bolts" when used in a crossbow.
Plans call them "quarrels"? Never heard that term before.


Well, maybe you should bolt when someone offers you a quarrel if he
disagrees with you..
--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23


  #7   Report Post  
Robert Bonomi
 
Posts: n/a
Default

In article . com,
DamnYankee wrote:
I thought the "arrows" were called "bolts" when used in a crossbow.
Plans call them "quarrels"? Never heard that term before.


When you get down to the nuts-and-bolts of it, a quarrel is a particular
kind of an arrow -- one having a squared-off head.

A bolt is also a particular kind of an arrow -- one that is characterized
by having a short and heavy shaft., as is typically used in a cross-bow.
  #8   Report Post  
DamnYankee
 
Posts: n/a
Default

Interesting! Thanks for the education.

Bryan

  #9   Report Post  
John
 
Posts: n/a
Default

On Tue, 02 Aug 2005 15:41:53 -0000,
(Robert Bonomi) wrote:

In article . com,
DamnYankee wrote:
I thought the "arrows" were called "bolts" when used in a crossbow.
Plans call them "quarrels"? Never heard that term before.


When you get down to the nuts-and-bolts of it, a quarrel is a particular
kind of an arrow -- one having a squared-off head.

A bolt is also a particular kind of an arrow -- one that is characterized
by having a short and heavy shaft., as is typically used in a cross-bow.


There used to be a kind of mason's chisel called a quarrel too -
possibly for the same reason, or perhaps because of a similarity.

Lots of interesting terms come from bows and crossbows. A spanner was
a device used to cock (or span) some of them - drawing the string back
to the nut or release mechanism. Later a tool to cock early firearms.
These days a general engineering tool used to tighten nuts of a
different sort.

To have "shot your bolt" comes from crossbow use. They weren't quick
to load, like the longbows. So if your bolt was shot, and some huge
fellow with a long pointy thing was riding towards you, your day was
about to be seriously spoiled.

A "cock-up" isn't half as rude as it sounds. The "cock feather" on an
arrow or bolt needed to be away from the bow or stock - otherwise the
arrow could go anywhere. Hence eventually a mistake of any kind.

Having "two strings to your bow" is fairly obvious. Less obvious is
the old English saying "keep it under your hat". Bowmen commonly wore
headgear of some kind - often of leather - and kept their strings dry
under them.

And of course the traditional and still much-used British
"two-fingers" gesture, used by longbowmen to show the enemy that they
could still draw a bow (those two fingers often being cut off by the
enemy if they were captured). The sexual connotations weren't
unintentional.

John


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
crossbow prod Håken Metalworking 14 February 9th 05 12:44 AM
steel crossbow prod Håken Metalworking 0 January 24th 05 05:32 PM
crossbow prod Håken Woodworking 2 January 24th 05 03:57 PM
crossbow prod Håken Metalworking 1 January 23rd 05 01:32 AM
Building a longbow or crossbow Rileyesi Woodworking 11 January 7th 05 01:15 AM


All times are GMT +1. The time now is 08:06 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"