Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Planer /thicknesser problem
I've just bought an ELU 1901 planer/thicknesser. Unfortunately the
seller decided to remove the tables for carriage - and then decided to deliver himself and put them back on ! They are now some 1mm out of parallel across the machine. I think I can work out how to correct this but has anyone done it before ? Rob |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Problem with room getting too hot from facing the south (even in late October) | Home Repair | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Ownership | |||
Problem with new water heater (electric) - please advice | Home Ownership | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
CRT Contrast Problem | Electronics Repair |