Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Woodworker to Carpenter Woes...
So maybe Norm takes a ding as a carpenter turned woodworker, but I think
I'm getting a feel for the other side of the equation. While putting up a small fort/playhouse in the backyard - I couldn't help myself from: - Running the 4x4's thru the jointer/planer to straighten them out and finish them - Putting a 1/4" roundover on the stock. - Looking for the "best side" on a 2x4 destined to be framing material - Reaching for the Japanese Pull saw to finish off an inside corner - Sneaking up on a cut via seven trips to the miter saw - Noticing that I'm off by about an 1/8th inch on some joinery The real mental dichotomy surfaced around the framing nailer: (1) wow, what a cool kick-a$$, Tim Allen, power tool (2) ohmygawd butt joints and exposed nail heads everywhere! |
#2
|
|||
|
|||
And did you use a few brads to hold the pieces until the glue dries??
Dave Patrick Conroy wrote: So maybe Norm takes a ding as a carpenter turned woodworker, but I think I'm getting a feel for the other side of the equation. While putting up a small fort/playhouse in the backyard - I couldn't help myself from: - Running the 4x4's thru the jointer/planer to straighten them out and finish them - Putting a 1/4" roundover on the stock. - Looking for the "best side" on a 2x4 destined to be framing material - Reaching for the Japanese Pull saw to finish off an inside corner - Sneaking up on a cut via seven trips to the miter saw - Noticing that I'm off by about an 1/8th inch on some joinery The real mental dichotomy surfaced around the framing nailer: (1) wow, what a cool kick-a$$, Tim Allen, power tool (2) ohmygawd butt joints and exposed nail heads everywhere! |
#3
|
|||
|
|||
Yep... it's a LOT different but the skill set carries
over both ways. The carpenter guys just don't screw around as much as the woodworkers. Framing nailers are a good thing.(dangerous but a good thing) You get a lot more popular in the neighborhood when they find out you can "switch hit" on wooddorking/carpentry. Patrick Conroy wrote: So maybe Norm takes a ding as a carpenter turned woodworker, but I think I'm getting a feel for the other side of the equation. While putting up a small fort/playhouse in the backyard - I couldn't help myself from: - Running the 4x4's thru the jointer/planer to straighten them out and finish them - Putting a 1/4" roundover on the stock. - Looking for the "best side" on a 2x4 destined to be framing material - Reaching for the Japanese Pull saw to finish off an inside corner - Sneaking up on a cut via seven trips to the miter saw - Noticing that I'm off by about an 1/8th inch on some joinery The real mental dichotomy surfaced around the framing nailer: (1) wow, what a cool kick-a$$, Tim Allen, power tool (2) ohmygawd butt joints and exposed nail heads everywhere! |
#4
|
|||
|
|||
"Patrick Conroy" wrote in message ... So maybe Norm takes a ding as a carpenter turned woodworker, but I think I'm getting a feel for the other side of the equation. While putting up a small fort/playhouse in the backyard - I couldn't help myself from: - Running the 4x4's thru the jointer/planer to straighten them out and finish them - Putting a 1/4" roundover on the stock. - Looking for the "best side" on a 2x4 destined to be framing material - Reaching for the Japanese Pull saw to finish off an inside corner - Sneaking up on a cut via seven trips to the miter saw - Noticing that I'm off by about an 1/8th inch on some joinery The real mental dichotomy surfaced around the framing nailer: (1) wow, what a cool kick-a$$, Tim Allen, power tool (2) ohmygawd butt joints and exposed nail heads everywhere! I understand well.... I'm residing my house with Hardiplank and replacing the windows with new windows rather than replacement windows. I'm fixing all kinds of out of level/out of square situations with shims, tapered-on-the-jointer spacers, etc. While installing a mounting block for a flood light fixture, some 18 feet above grade near the frieze board, I was doing work that would pass scrutiny at eyeball level next to a doorway... It's hard to get away from the furniture mentality... A number of years back I built wooden steps down the grade to the dog run. I cut huge dovetails to hold the two sides of the assembly together. Mind you this was with landscape timbers! ;-) John |
#5
|
|||
|
|||
May your guilt-trip be a short one. It was only ONE playhouse that
took you 4 days to complete. Less time than you would have invested in a furniture project. Next time, you are limited to the chop saw, a circular saw, the framing nailer, a framing hammer and a 25' tape measure. p.s. Do NOT look at those 4x4's after the first summer of hot weather. On Thu, 09 Jun 2005 20:23:23 GMT, Patrick Conroy wrote: So maybe Norm takes a ding as a carpenter turned woodworker, but I think I'm getting a feel for the other side of the equation. While putting up a small fort/playhouse in the backyard - I couldn't help myself from: - Running the 4x4's thru the jointer/planer to straighten them out and finish them - Putting a 1/4" roundover on the stock. - Looking for the "best side" on a 2x4 destined to be framing material - Reaching for the Japanese Pull saw to finish off an inside corner - Sneaking up on a cut via seven trips to the miter saw - Noticing that I'm off by about an 1/8th inch on some joinery The real mental dichotomy surfaced around the framing nailer: (1) wow, what a cool kick-a$$, Tim Allen, power tool (2) ohmygawd butt joints and exposed nail heads everywhere! |
#6
|
|||
|
|||
On Thu, 09 Jun 2005 20:23:23 GMT, Patrick Conroy
wrote: So maybe Norm takes a ding as a carpenter turned woodworker, but I think I'm getting a feel for the other side of the equation. While putting up a small fort/playhouse in the backyard - I couldn't help myself from: - Running the 4x4's thru the jointer/planer to straighten them out and finish them - Putting a 1/4" roundover on the stock. - Looking for the "best side" on a 2x4 destined to be framing material - Reaching for the Japanese Pull saw to finish off an inside corner - Sneaking up on a cut via seven trips to the miter saw - Noticing that I'm off by about an 1/8th inch on some joinery The real mental dichotomy surfaced around the framing nailer: (1) wow, what a cool kick-a$$, Tim Allen, power tool (2) ohmygawd butt joints and exposed nail heads everywhere! That goes for machinists turned woodworker as well. Differing stock thicknesses drive them nuts as do methods of measurement and error tolerances. |
#7
|
|||
|
|||
On Thu, 09 Jun 2005 20:23:23 GMT, Patrick Conroy
wrote: So maybe Norm takes a ding as a carpenter turned woodworker, but I think I'm getting a feel for the other side of the equation. While putting up a small fort/playhouse in the backyard - I couldn't help myself from: - Running the 4x4's thru the jointer/planer to straighten them out and finish them - Putting a 1/4" roundover on the stock. - Looking for the "best side" on a 2x4 destined to be framing material - Reaching for the Japanese Pull saw to finish off an inside corner - Sneaking up on a cut via seven trips to the miter saw - Noticing that I'm off by about an 1/8th inch on some joinery The real mental dichotomy surfaced around the framing nailer: (1) wow, what a cool kick-a$$, Tim Allen, power tool (2) ohmygawd butt joints and exposed nail heads everywhere! What grit sand paper did you use to smooth the studs before staining them cherry? mac Please remove splinters before emailing |
#8
|
|||
|
|||
mac davis wrote in
: snip What grit sand paper did you use to smooth the studs before staining them cherry? REAL furniture guys use handplanes. Preferably those handmade in Portland. Sheesh. Patriarch |
#9
|
|||
|
|||
mac davis wrote in
: What grit sand paper did you use to smooth the studs before staining them cherry? Started the progression off at 80 and then moved all the way... ....back to 36. why? thinking an axe would'a given a nicer surface to accept the minwhacks? |
#10
Posted to rec.woodworking
|
|||
|
|||
Woodworker to Carpenter Woes...
responding to
http://www.homeownershub.com/woodwor...oes-22236-.htm theboisshop wrote: I started in construction, came over to woodworking several years after that, and can't find it in me to go back. I've faced a few home ownership situations where I've now actually hired a carpenter to come in and do work that I COULD do. At the end of the day I'd rather spend time in my shop building furniture, and pay someone else to do the carpentry. I've gotten a few raised eyebrows from carpenters when they see my shop! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
how long to eradicate carpenter ant nest | Home Ownership | |||
American Woodworker Mag Sells E-mail List | Woodworking | |||
Anybody have American Woodworker Oct. '01? | Woodworking | |||
FYI: "Cutting Edge Woodworker" on Discovery Home and Leisure | Woodworking | |||
Mulch and Carpenter Ants | Home Repair |