Woodworking Plans and Photos (alt.binaries.pictures.woodworking) - Show off or just share photos of your hard work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 1,041
Default Santa's shop work

Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.

--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill

Attached Thumbnails
Santa's shop work-img_0286_sm-jpg  
  #2   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 1,041
Default Santa's shop work

On 12/19/2011 11:42 AM, Doug Winterburn wrote:
Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.

the plan was in Woodsmith.


--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill
  #3   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 192
Default Santa's shop work

OK...as a non-subscriber (wife is looking for mags for me though) tell us
how the inlay grooving were done. I have an idea on the rest of it but may
be way out in left field.


---------
"Doug Winterburn" wrote in message
eb.com...

On 12/19/2011 11:42 AM, Doug Winterburn wrote:
Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.

the plan was in Woodsmith.


--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill

  #4   Report Post  
Posted to alt.binaries.pictures.woodworking
Han Han is offline
external usenet poster
 
Posts: 4,297
Default Santa's shop work

Doug Winterburn wrote in news:4eef857b$0$24885
:

Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.


Beautiful!! I started making them, but got hung up with the intricacies of
keeping things even and straight.

--
Best regards
Han
email address is invalid
  #5   Report Post  
Posted to alt.binaries.pictures.woodworking
Han Han is offline
external usenet poster
 
Posts: 4,297
Default Santa's shop work

"Josepi" wrote in
:

OK...as a non-subscriber (wife is looking for mags for me though) tell
us how the inlay grooving were done. I have an idea on the rest of it
but may be way out in left field.


---------
"Doug Winterburn" wrote in message
eb.com...

On 12/19/2011 11:42 AM, Doug Winterburn wrote:
Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.

the plan was in Woodsmith.


You use a band saw to cut the maple square in 2 along one of the curves,
then glue a narrow band in the kerf, clamp things together until dry,then
repeat.


--
Best regards
Han
email address is invalid


  #6   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 192
Default Santa's shop work

Doesn't that make the piece have gaps on certain curves? Do you cut out a
"Strip" to match the size of the inlay detail coloured piece?

I assume this is done on veneer thick pieces and all glued to a backplane?

----------
"Han" wrote in message ...

"Josepi" wrote in
:

OK...as a non-subscriber (wife is looking for mags for me though) tell
us how the inlay grooving were done. I have an idea on the rest of it
but may be way out in left field.


---------
"Doug Winterburn" wrote in message
eb.com...

On 12/19/2011 11:42 AM, Doug Winterburn wrote:
Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.

the plan was in Woodsmith.


You use a band saw to cut the maple square in 2 along one of the curves,
then glue a narrow band in the kerf, clamp things together until dry,then
repeat.


--
Best regards
Han
email address is invalid

  #7   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 392
Default Santa's shop work

Very nice work in Santa's workshop.
nice fine lines blended into the maple.
Santa will be happy to put those under the tree.
john

"Doug Winterburn" wrote in message
eb.com...

Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.

--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill

  #8   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 1,041
Default Santa's shop work

On 12/19/2011 05:39 PM, jloomis wrote:
Very nice work in Santa's workshop.
nice fine lines blended into the maple.
Santa will be happy to put those under the tree.
john

"Doug Winterburn" wrote in message
eb.com...

Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.


Thanks, John


--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill
  #9   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 1,041
Default Santa's shop work

On 12/19/2011 12:26 PM, Han wrote:
Doug wrote in news:4eef857b$0$24885
:

Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.


Beautiful!! I started making them, but got hung up with the intricacies of
keeping things even and straight.


Thanks, Han.

After I got started, I almost did as you. The main thing is a good
bandsaw blade and setup. The Woodslicer 1/2" resaw blade was the key to
success. Slicing the glued up blank into 1/4" coasters was a breeze
with the woodslicer.

- Doug


--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill
  #10   Report Post  
Posted to alt.binaries.pictures.woodworking
Han Han is offline
external usenet poster
 
Posts: 4,297
Default Santa's shop work

Doug Winterburn wrote in
b.com:

On 12/19/2011 12:26 PM, Han wrote:
Doug wrote in
news:4eef857b$0$24885 :

Made 6 sets of these coasters for gifts. Maple with walnut and
cherry accents.


Beautiful!! I started making them, but got hung up with the
intricacies of keeping things even and straight.


Thanks, Han.

After I got started, I almost did as you. The main thing is a good
bandsaw blade and setup. The Woodslicer 1/2" resaw blade was the key
to success. Slicing the glued up blank into 1/4" coasters was a
breeze with the woodslicer.

- Doug


Santa thanks you, Doug!

--
Best regards
Han
email address is invalid


  #11   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 12,155
Default Santa's shop work

On 12/19/2011 12:42 PM, Doug Winterburn wrote:
Made 6 sets of these coasters for gifts. Maple with walnut and cherry
accents.


Very nice Doug! I don't think I would use them as coasters though. ;~)
  #12   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 128
Default Santa's shop work

Made 6 sets of these coasters for gifts. Maple with walnut and
cherry
accents.

--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill


Look great
Do you have tracking # for my set?g
Can I expect it before Xmas?


  #13   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 1,041
Default Santa's shop work

On 12/20/2011 12:24 PM, ChairMan wrote:
Made 6 sets of these coasters for gifts. Maple with walnut and
cherry
accents.

--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill


Look great
Do you have tracking # for my set?g
Can I expect it before Xmas?



Thanks, Chair.

All the wimmins in the family were in line before you :-(

- Doug


--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill
  #14   Report Post  
Posted to alt.binaries.pictures.woodworking
external usenet poster
 
Posts: 128
Default Santa's shop work

On 12/20/2011 12:24 PM, ChairMan wrote:
Made 6 sets of these coasters for gifts. Maple with walnut and
cherry
accents.

--
"Socialism is a philosophy of failure,the creed of ignorance, and
the gospel of envy, its inherent virtue is the equal sharing of
misery" -Winston Churchill


Look great
Do you have tracking # for my set?g
Can I expect it before Xmas?



Thanks, Chair.

All the wimmins in the family were in line before you :-(

- Doug



story of my lifeg


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Santa's work done for '09 Doug Winterburn Woodworking Plans and Photos 5 December 26th 09 07:18 PM
need some work for my shop [email protected] Metalworking 0 September 18th 07 08:25 AM
Santa's Dilemma Tom Watson Woodworking 5 December 24th 06 08:39 AM
OT - Santa's Revenge? J T Woodworking 1 December 26th 05 02:44 AM
In Santa's Shop Tom Watson Woodworking 2 December 22nd 05 04:53 PM


All times are GMT +1. The time now is 05:31 AM.

Powered by vBulletin® Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2004-2023 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"