DIYbanter - Cutting Seqments for Turning

DIYbanter (https://www.diybanter.com/)

- Woodturning (https://www.diybanter.com/woodturning/)

- - Cutting Seqments for Turning (https://www.diybanter.com/woodturning/76057-re-cutting-seqments-turning.html)

Cutting Seqments for Turning

"Keith Young" wrote:

Hi

Has anybody come up with a simple mitre box for cutting peices for
seqmented boxes, bowls, etc.While jigs manufactured for cutting these
on table saws exist ( and there are plenty examples on the web ) most
of these are beyond my apprehension.! Guess i,m not patience enough to
print and study the diagrams. LAZY I guess! Seems someone should have
by now developed a circle. Angles could be inserted by placing the
cutting edge on pins and placeing them on on cutting edge. A simple
hand saw is all that maybe required. Simple formulas for HOW MANY
sides and length of each to obtain the diameter you wish.

Any suggestions
All woodturners are not mathimatical engineers,or want to be.The joy
is in the turning for me.

Sincerely
Keith Young
Newfoundland
Canada

e-mail

Search google for 'segmented software'. You'll find some reasonably
priced software that should help you.

"Keith Young" wrote:

Thank You!

Keith

You're welcome. If you buy one of the packages, maybe you could post a
review?

LD

"Lobby Dosser" wrote in message
news:kM%kd.573$mc.125@trnddc07...
"Keith Young" wrote:

Hi

Has anybody come up with a simple mitre box for cutting peices for
seqmented boxes, bowls, etc.While jigs manufactured for cutting
these on table saws exist ( and there are plenty examples on the web
) most of these are beyond my apprehension.! Guess i,m not patience
enough to print and study the diagrams. LAZY I guess! Seems someone
should have by now developed a circle. Angles could be inserted by
placing the cutting edge on pins and placeing them on on cutting
edge. A simple hand saw is all that maybe required. Simple formulas
for HOW MANY sides and length of each to obtain the diameter you
wish.

Any suggestions
All woodturners are not mathimatical engineers,or want to be.The joy
is in the turning for me.

Sincerely
Keith Young
Newfoundland
Canada

e-mail

Search google for 'segmented software'. You'll find some reasonably
priced software that should help you.

For a cheap jig that works great check this out.
http://www.woodturns.com/articles/ji...miter_sled.htm

"Keith Young" wrote in message
...
Hi

Has anybody come up with a simple mitre box for cutting peices for
seqmented boxes, bowls, etc.While jigs manufactured for cutting these on
table saws exist ( and there are plenty examples on the web ) most of
these
are beyond my apprehension.! Guess i,m not patience enough to print and
study the diagrams. LAZY I guess! Seems someone should have by now
developed
a circle. Angles could be inserted by placing the cutting edge on pins and
placeing them on on cutting edge. A simple hand saw is all that maybe
required. Simple formulas for HOW MANY sides and length of each to obtain
the diameter you wish.

Any suggestions
All woodturners are not mathimatical engineers,or want to be.The joy is in
the turning for me.

Sincerely
Keith Young
Newfoundland
Canada

e-mail