![]() |
Final update: healing bowls
On my next to last batch of bowls roughed out, there were 12 cracked
ones for reasons unknown. As an experiment, I soaked each one in a 50:50 mixture of white glue and water. I soaked each one in a plastic tub, with a brick on it to keep it submerged, for 2 days. Then I put two strips of wood across the container and turned the bowl down on them to drain for a few hours, wiped the remainder off and set it back to dry. Most of the cracks were initially about 1/16 inch wide some were 1/8 or a little larger. One showed no improvement. One was completely healed. Even after completely drying, finish turning and sanding I never found the original crack. Most of the others when finished have what looks like a black hair where the crack was. This decreases their value but tells me the procedure is not totally worthless. I probably will not use this again but it is an option for a irreplaceable piece that cracked. Note: All these bowls were Sweetgum. -- Gerald Ross Cochran, GA Somewhere in the world there's somebody better than me, but I haven't met him yet. |
Final update: healing bowls
"Gerald Ross" wrote in message ... On my next to last batch of bowls roughed out, there were 12 cracked ones for reasons unknown. As an experiment, I soaked each one in a 50:50 mixture of white glue and water. I soaked each one in a plastic tub, with a brick on it to keep it submerged, for 2 days. Then I put two strips of wood across the container and turned the bowl down on them to drain for a few hours, wiped the remainder off and set it back to dry. Most of the cracks were initially about 1/16 inch wide some were 1/8 or a little larger. One showed no improvement. One was completely healed. Even after completely drying, finish turning and sanding I never found the original crack. Most of the others when finished have what looks like a black hair where the crack was. This decreases their value but tells me the procedure is not totally worthless. I probably will not use this again but it is an option for a irreplaceable piece that cracked. Note: All these bowls were Sweetgum. -- Gerald Ross Cochran, GA the cracks can add value if you exploit them boiling the bowls will also fix the problem - boil right after rough turning - boil for an hour or two then let dry Somewhere in the world there's somebody better than me, but I haven't met him yet. |
Final update: healing bowls
Bill Noble wrote:
"Gerald wrote in message ... On my next to last batch of bowls roughed out, there were 12 cracked ones for reasons unknown. As an experiment, I soaked each one in a 50:50 mixture of white glue and water. I soaked each one in a plastic tub, with a brick on it to keep it submerged, for 2 days. Then I put two strips of wood across the container and turned the bowl down on them to drain for a few hours, wiped the remainder off and set it back to dry. Most of the cracks were initially about 1/16 inch wide some were 1/8 or a little larger. One showed no improvement. One was completely healed. Even after completely drying, finish turning and sanding I never found the original crack. Most of the others when finished have what looks like a black hair where the crack was. This decreases their value but tells me the procedure is not totally worthless. I probably will not use this again but it is an option for a irreplaceable piece that cracked. Note: All these bowls were Sweetgum. -- Gerald Ross Cochran, GA the cracks can add value if you exploit them boiling the bowls will also fix the problem - boil right after rough turning - boil for an hour or two then let dry I went through my boiling period a couple of years ago. Made me feel like the witch of Endor and over a long period did not notice any big change in the number of cracks. -- Gerald Ross Cochran, GA Abstinence makes the heart grow fonder. |
All times are GMT +1. The time now is 10:13 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter