Belts for Craftsman/Palmgren 15" lathe
I like my Craftsman 15" but have found some difficulty with the drive belts,
they wear quickly and Sears wants about C$50 for them. Way too much for a small belt. These are of course a proprietary size and no one else makes them. One of the manufacturers used to make a slightly larger one so it could be used, but they no longer do so. So I had some made for me a the Belt Store of Lafayette. Including shipping I got them for under $US80 with about two and a half weeks for make up and delivery to Nova Scotia. Very nice. I put one on and it is great. No affiliation except satisfaction but I thought folks might like to know. They will make up any belt you want. The Craftsman uses a 207 3gt x 20mm. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com |
Belts for Craftsman/Palmgren 15" lathe
Oops! Sorry about that. I meant to say that I got six belts for the $80.00.
-- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com "Darrell Feltmate" wrote in message news:x0zGi.48509$Pd4.24965@edtnps82... I like my Craftsman 15" but have found some difficulty with the drive belts, they wear quickly and Sears wants about C$50 for them. Way too much for a small belt. These are of course a proprietary size and no one else makes them. One of the manufacturers used to make a slightly larger one so it could be used, but they no longer do so. So I had some made for me a the Belt Store of Lafayette. Including shipping I got them for under $US80 with about two and a half weeks for make up and delivery to Nova Scotia. Very nice. I put one on and it is great. No affiliation except satisfaction but I thought folks might like to know. They will make up any belt you want. The Craftsman uses a 207 3gt x 20mm. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com |
Belts for Craftsman/Palmgren 15" lathe
I was going to ask if the exchange rate had made an enormous move without my
notice. Okay, 6 for us$80 is cheaper than 1 for C$50. BTW, we bought our first dog in Nova Scotia; they are available in the US now. "Darrell Feltmate" wrote in message news:Z%CGi.64245$vP5.50290@edtnps90... Oops! Sorry about that. I meant to say that I got six belts for the $80.00. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com "Darrell Feltmate" wrote in message news:x0zGi.48509$Pd4.24965@edtnps82... I like my Craftsman 15" but have found some difficulty with the drive belts, they wear quickly and Sears wants about C$50 for them. Way too much for a small belt. These are of course a proprietary size and no one else makes them. One of the manufacturers used to make a slightly larger one so it could be used, but they no longer do so. So I had some made for me a the Belt Store of Lafayette. Including shipping I got them for under $US80 with about two and a half weeks for make up and delivery to Nova Scotia. Very nice. I put one on and it is great. No affiliation except satisfaction but I thought folks might like to know. They will make up any belt you want. The Craftsman uses a 207 3gt x 20mm. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com |
Belts for Craftsman/Palmgren 15" lathe
OH MY your an old fellow. Dogs have been available in the US fo some thime
now;-) "Toller" wrote in message ... I was going to ask if the exchange rate had made an enormous move without my notice. Okay, 6 for us$80 is cheaper than 1 for C$50. BTW, we bought our first dog in Nova Scotia; they are available in the US now. "Darrell Feltmate" wrote in message news:Z%CGi.64245$vP5.50290@edtnps90... Oops! Sorry about that. I meant to say that I got six belts for the $80.00. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com "Darrell Feltmate" wrote in message news:x0zGi.48509$Pd4.24965@edtnps82... I like my Craftsman 15" but have found some difficulty with the drive belts, they wear quickly and Sears wants about C$50 for them. Way too much for a small belt. These are of course a proprietary size and no one else makes them. One of the manufacturers used to make a slightly larger one so it could be used, but they no longer do so. So I had some made for me a the Belt Store of Lafayette. Including shipping I got them for under $US80 with about two and a half weeks for make up and delivery to Nova Scotia. Very nice. I put one on and it is great. No affiliation except satisfaction but I thought folks might like to know. They will make up any belt you want. The Craftsman uses a 207 3gt x 20mm. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com |
Belts for Craftsman/Palmgren 15" lathe
Not Nova Scotia Duck Tolling Retrievers. There are no other dogs.
"llilly" wrote in message ... OH MY your an old fellow. Dogs have been available in the US fo some thime now;-) "Toller" wrote in message ... I was going to ask if the exchange rate had made an enormous move without my notice. Okay, 6 for us$80 is cheaper than 1 for C$50. BTW, we bought our first dog in Nova Scotia; they are available in the US now. "Darrell Feltmate" wrote in message news:Z%CGi.64245$vP5.50290@edtnps90... Oops! Sorry about that. I meant to say that I got six belts for the $80.00. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com "Darrell Feltmate" wrote in message news:x0zGi.48509$Pd4.24965@edtnps82... I like my Craftsman 15" but have found some difficulty with the drive belts, they wear quickly and Sears wants about C$50 for them. Way too much for a small belt. These are of course a proprietary size and no one else makes them. One of the manufacturers used to make a slightly larger one so it could be used, but they no longer do so. So I had some made for me a the Belt Store of Lafayette. Including shipping I got them for under $US80 with about two and a half weeks for make up and delivery to Nova Scotia. Very nice. I put one on and it is great. No affiliation except satisfaction but I thought folks might like to know. They will make up any belt you want. The Craftsman uses a 207 3gt x 20mm. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com |
Belts for Craftsman/Palmgren 15" lathe
Nice Dog!
-- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com "Toller" wrote in message ... Not Nova Scotia Duck Tolling Retrievers. There are no other dogs. "llilly" wrote in message ... OH MY your an old fellow. Dogs have been available in the US fo some thime now;-) "Toller" wrote in message ... I was going to ask if the exchange rate had made an enormous move without my notice. Okay, 6 for us$80 is cheaper than 1 for C$50. BTW, we bought our first dog in Nova Scotia; they are available in the US now. "Darrell Feltmate" wrote in message news:Z%CGi.64245$vP5.50290@edtnps90... Oops! Sorry about that. I meant to say that I got six belts for the $80.00. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com "Darrell Feltmate" wrote in message news:x0zGi.48509$Pd4.24965@edtnps82... I like my Craftsman 15" but have found some difficulty with the drive belts, they wear quickly and Sears wants about C$50 for them. Way too much for a small belt. These are of course a proprietary size and no one else makes them. One of the manufacturers used to make a slightly larger one so it could be used, but they no longer do so. So I had some made for me a the Belt Store of Lafayette. Including shipping I got them for under $US80 with about two and a half weeks for make up and delivery to Nova Scotia. Very nice. I put one on and it is great. No affiliation except satisfaction but I thought folks might like to know. They will make up any belt you want. The Craftsman uses a 207 3gt x 20mm. -- God bless and safe turning Darrell Feltmate Truro, NS http://aroundthewoods.com http://roundopinions.blogspot.com |
Belts for Craftsman/Palmgren 15" lathe
Toller wrote:
Not Nova Scotia Duck Tolling Retrievers. There are no other dogs. Well, maybe. It all depends on the seasoning... ....Kevin -- Kevin Miller http://www.alaska.net/~atftb Juneau, Alaska Registered Linux User No: 307357 |
All times are GMT +1. The time now is 04:30 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter