Home |
Search |
Today's Posts |
|
Woodturning (rec.crafts.woodturning) To discuss tools, techniques, styles, materials, shows and competitions, education and educational materials related to woodturning. All skill levels are welcome, from art turners to production turners, beginners to masters. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.woodturning
|
|||
|
|||
Bloodwood
Any ever try to do much with this stuff other than pens? I did a couple
decent spindle turnings that were ok, then tried a platter. What a mess. Dry wood, newly sharpened tools, but huge chipouts and hard as hell to cut. Anyne have anyone idea? |
#2
Posted to rec.crafts.woodturning
|
|||
|
|||
Bloodwood
I have used it in segmented turnings and it seems to work well for me with
sharp tools. I have not tried turning bowls or platers out of bloodwood yet so I do not know how well it turns for that purpose. Steven Raphael Ithaca MI. http://www.geocities.com/steven_raph...turnings1.html "Neil Larson" wrote in message ... Any ever try to do much with this stuff other than pens? I did a couple decent spindle turnings that were ok, then tried a platter. What a mess. Dry wood, newly sharpened tools, but huge chipouts and hard as hell to cut. Anyne have anyone idea? |
#3
Posted to rec.crafts.woodturning
|
|||
|
|||
Bloodwood
I've turned a number of bowls from Bloodwood, both unsegmented and segmented. I've never had any problem with it. Quite the contrary, I found that it cuts smooth and polishes to a fantastic finish. What I've worked with was purchased slightly green and air dried very slowly. Is the stuff you're working with kiln dried. That might make a difference. Also, I would guess that a lot of wood might be called Bloodwood. Probably anything that's red and unidentified. Are you sure what you have is the genus Brosimum? |
#4
Posted to rec.crafts.woodturning
|
|||
|
|||
Bloodwood
On Sun, 15 Jul 2007 14:16:19 -0500, "Neil Larson"
wrote: Any ever try to do much with this stuff other than pens? I did a couple decent spindle turnings that were ok, then tried a platter. What a mess. Dry wood, newly sharpened tools, but huge chipouts and hard as hell to cut. Anyne have anyone idea? It usually turns very well with sharp tools and smells wonderful.. It's one of my favorites for goblets, also.. holds beading and other details really well... IMO, it should be a bit "hard to cut", which is why it "machines" well and holds detail...but I've never had any unusual chipping with it.. OTOH, I find that wood being a product of nature, no 2 pieces are alike.. part of what makes turning unique... I just did several purpleheart pens and they were not only various shapes of purple, but some was tighter grain, some held detail well, etc... mac Please remove splinters before emailing |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
turning bloodwood | Woodturning | |||
Staining Oak to Bloodwood | Woodworking | |||
Bloodwood | Woodworking |