Robust Tools Lathes
There are some nice lathes at www.turnrobust.com that are on the level
of Oneway lathes. They offer 18x28 and 25x28 models and have some nice features like stainless bed ways, big sealed bearings, a sliding headstock, and a seven year warranty, plus they are made in the USA. As an option, Robust features a Tilt Away which attaches to the end of lathe and lets you slide the tailstock onto it and rotate it out of the way. It is what I categorize as a high end lathe in the 5K price range and certainly worth looking at. Are there any owner's opinions out there? |
Robust Tools Lathes
woods wrote:
There are some nice lathes at www.turnrobust.com that are on the level of Oneway lathes. They offer 18x28 and 25x28 models and have some nice features like stainless bed ways, big sealed bearings, a sliding headstock, and a seven year warranty, plus they are made in the USA. As an option, Robust features a Tilt Away which attaches to the end of lathe and lets you slide the tailstock onto it and rotate it out of the way. It is what I categorize as a high end lathe in the 5K price range and certainly worth looking at. Are there any owner's opinions out there? All but a couple of the links are broken ... I get, essentially, nothing from that web site. Bill |
Robust Tools Lathes
Bill in Detroit writes:
woods wrote: There are some nice lathes at www.turnrobust.com that are on the level All but a couple of the links are broken ... I get, essentially, nothing from that web site. It worked for me. -- Sending unsolicited commercial e-mail to this account incurs a fee of $500 per message, and acknowledges the legality of this contract. |
Robust Tools Lathes
It worked for me.
Worked for me too. Kinda interesting. RonB |
Robust Tools Lathes
Worked fine for me. I love my Stubby, but this looks impressive.
"Bill in Detroit" wrote in message ... All but a couple of the links are broken ... I get, essentially, nothing from that web site. Bill |
Robust Tools Lathes
Seen that lathe before, thought they had gone bankrupt, someone buy
them out ??? Come to think of it that would be a problem though. woods wrote: There are some nice lathes at www.turnrobust.com that are on the level of Oneway lathes. They offer 18x28 and 25x28 models and have some nice features like stainless bed ways, big sealed bearings, a sliding headstock, and a seven year warranty, plus they are made in the USA. As an option, Robust features a Tilt Away which attaches to the end of lathe and lets you slide the tailstock onto it and rotate it out of the way. It is what I categorize as a high end lathe in the 5K price range and certainly worth looking at. Are there any owner's opinions out there? |
Robust Tools Lathes
On 22 Nov 2006 06:54:29 -0800, "woods" wrote:
There are some nice lathes at www.turnrobust.com that are on the level of Oneway lathes. They offer 18x28 and 25x28 models and have some nice features like stainless bed ways, big sealed bearings, a sliding headstock, and a seven year warranty, plus they are made in the USA. As an option, Robust features a Tilt Away which attaches to the end of lathe and lets you slide the tailstock onto it and rotate it out of the way. It is what I categorize as a high end lathe in the 5K price range and certainly worth looking at. Are there any owner's opinions out there? Home page picture links are all broken. Most of the others seemed okay. I couldn't find prices anywhere (maybe they were in the PDF--I didn't bother with that--stupid way to do it anyway). I'm unimpressed with the posting history of the OP. Reads a LOT like a shill to me. I'll apologize if I'm wrong. -- LRod Master Woodbutcher and seasoned termite Shamelessly whoring my website since 1999 http://www.woodbutcher.net Proud participant of rec.woodworking since February, 1997 email addy de-spam-ified due to 1,000 spams per month. If you can't figure out how to use it, I probably wouldn't care to correspond with you anyway. |
Robust Tools Lathes
well, all the photo links in the home page are inop for me - I think he
wrote the web page for IE and ignored any other browser, didn't check it with IE though the lathe is a medium sized lathe - as I understand it, at least - it could revive the "cast iron versus steel" debate again. Several things on the description strike me as either nonsense or at least streching things a bit - the big bearing little bearing thing - with a sliding headsock this doesn't matter, and with adequate swing over bed it also doesn't matter. the SS ways is a bit bogus - I have a lathe with cast ways, I don't take particular care of it, and the only time I've seen rust is after turnign oak or when my roof leaked on it -so SS sounds good but may not be all that important. No mention of vacuum - on a new design I'd expect some consideration of that "Bill in Detroit" wrote in message ... woods wrote: There are some nice lathes at www.turnrobust.com that are on the level of Oneway lathes. They offer 18x28 and 25x28 models and have some nice features like stainless bed ways, big sealed bearings, a sliding headstock, and a seven year warranty, plus they are made in the USA. As an option, Robust features a Tilt Away which attaches to the end of lathe and lets you slide the tailstock onto it and rotate it out of the way. It is what I categorize as a high end lathe in the 5K price range and certainly worth looking at. Are there any owner's opinions out there? All but a couple of the links are broken ... I get, essentially, nothing from that web site. Bill -- Posted via a free Usenet account from http://www.teranews.com |
Robust Tools Lathes
LRod writes:
Home page picture links are all broken. Most of the others seemed okay. I couldn't find prices anywhere (maybe they were in the PDF--I didn't bother with that--stupid way to do it anyway). Yup. In the PDF. Prices ranged from $4K to $6K -- Sending unsolicited commercial e-mail to this account incurs a fee of $500 per message, and acknowledges the legality of this contract. |
Robust Tools Lathes
"William Noble" writes:
No mention of vacuum - on a new design I'd expect some consideration of that I saw in mentioned in the attachments, I think. -- Sending unsolicited commercial e-mail to this account incurs a fee of $500 per message, and acknowledges the legality of this contract. |
Robust Tools Lathes
The pictures are not used as links, but the words under the picture are.
John "William Noble" wrote in message .. . well, all the photo links in the home page are inop for me - I think he wrote the web page for IE and ignored any other browser, didn't check it with IE though the lathe is a medium sized lathe - as I understand it, at least - it could revive the "cast iron versus steel" debate again. Several things on the description strike me as either nonsense or at least streching things a bit - the big bearing little bearing thing - with a sliding headsock this doesn't matter, and with adequate swing over bed it also doesn't matter. the SS ways is a bit bogus - I have a lathe with cast ways, I don't take particular care of it, and the only time I've seen rust is after turnign oak or when my roof leaked on it -so SS sounds good but may not be all that important. No mention of vacuum - on a new design I'd expect some consideration of that "Bill in Detroit" wrote in message ... woods wrote: There are some nice lathes at www.turnrobust.com that are on the level of Oneway lathes. They offer 18x28 and 25x28 models and have some nice features like stainless bed ways, big sealed bearings, a sliding headstock, and a seven year warranty, plus they are made in the USA. As an option, Robust features a Tilt Away which attaches to the end of lathe and lets you slide the tailstock onto it and rotate it out of the way. It is what I categorize as a high end lathe in the 5K price range and certainly worth looking at. Are there any owner's opinions out there? All but a couple of the links are broken ... I get, essentially, nothing from that web site. Bill -- Posted via a free Usenet account from http://www.teranews.com |
Robust Tools Lathes
"Bruce Barnett" wrote in message ... "William Noble" writes: No mention of vacuum - on a new design I'd expect some consideration of that I saw in mentioned in the attachments, I think. So what's the difference? for every bell and whistle there's a basic anyway. What counts is that this is a big Mutha that will hold whatever setting and object you put on it. As to price, well, out of my league. But If I were to pay it, I'd consider I was paying for steel, not hoses or switches. |
Robust Tools Lathes
In article ,
LRod wrote: On 22 Nov 2006 06:54:29 -0800, "woods" wrote: There are some nice lathes at www.turnrobust.com that are on the level of Oneway lathes. They offer 18x28 and 25x28 models and have some nice features like stainless bed ways, big sealed bearings, a sliding headstock, and a seven year warranty, plus they are made in the USA. As an option, Robust features a Tilt Away which attaches to the end of lathe and lets you slide the tailstock onto it and rotate it out of the way. It is what I categorize as a high end lathe in the 5K price range and certainly worth looking at. Are there any owner's opinions out there? Home page picture links are all broken. Most of the others seemed okay. I couldn't find prices anywhere (maybe they were in the PDF--I didn't bother with that--stupid way to do it anyway). I'm unimpressed with the posting history of the OP. Reads a LOT like a shill to me. I'll apologize if I'm wrong. talk to an owner... I have, WOW -- -------------------------------------------------------- Personal e-mail is the n7bsn but at amsat.org This posting address is a spam-trap and seldom read RV and Camping FAQ can be found at http://www.ralphandellen.us/rv |
Robust Tools Lathes
In article . com,
"woods" wrote: There are some nice lathes at www.turnrobust.com that are on the level of Oneway lathes. They offer 18x28 and 25x28 models and have some nice features like stainless bed ways, big sealed bearings, a sliding headstock, and a seven year warranty, plus they are made in the USA. As an option, Robust features a Tilt Away which attaches to the end of lathe and lets you slide the tailstock onto it and rotate it out of the way. It is what I categorize as a high end lathe in the 5K price range and certainly worth looking at. Are there any owner's opinions out there? I've talked with a couple, they were -impressed-, See http://woodcentral.com/newforum/turning.shtml for a review posted today -- -------------------------------------------------------- Personal e-mail is the n7bsn but at amsat.org This posting address is a spam-trap and seldom read RV and Camping FAQ can be found at http://www.ralphandellen.us/rv |
Robust Tools Lathes
Ralph E Lindberg writes:
I'm unimpressed with the posting history of the OP. Reads a LOT like a shill to me. I'll apologize if I'm wrong. Posting history: 2 in rec.crafts.woodturning Robust Tools Lathes 45 hours ago For Sale- motor mount parts for Nova 3000 woodlathe 2 days ago -- Sending unsolicited commercial e-mail to this account incurs a fee of $500 per message, and acknowledges the legality of this contract. |
Robust Tools Lathes
In article ,
Bruce Barnett wrote: Ralph E Lindberg writes: I'm unimpressed with the posting history of the OP. Reads a LOT like a shill to me. I'll apologize if I'm wrong. Posting history: 2 in rec.crafts.woodturning Robust Tools Lathes 45 hours ago For Sale- motor mount parts for Nova 3000 woodlathe 2 days ago Please learn to properly attribute, I didn't post the above, I -quoted- it -- -------------------------------------------------------- Personal e-mail is the n7bsn but at amsat.org This posting address is a spam-trap and seldom read RV and Camping FAQ can be found at http://www.ralphandellen.us/rv |
Robust Tools Lathes
John (NC) wrote:
The pictures are not used as links, but the words under the picture are. John I'll give it another trial. "Optimized for MSIE" gives me the willies. That is the LAST browser I would use. Bill |
Robust Tools Lathes
Ralph E Lindberg writes:
Please learn to properly attribute, I didn't post the above, I -quoted- it Please accept my apology... -- Sending unsolicited commercial e-mail to this account incurs a fee of $500 per message, and acknowledges the legality of this contract. |
Robust Tools Lathes
In article . com,
"woods" wrote: There are some nice lathes at www.turnrobust.com that are on the level of Oneway lathes. They offer 18x28 and 25x28 models and have some nice features like stainless bed ways, big sealed bearings, a sliding headstock, and a seven year warranty, plus they are made in the USA. As an option, Robust features a Tilt Away which attaches to the end of lathe and lets you slide the tailstock onto it and rotate it out of the way. It is what I categorize as a high end lathe in the 5K price range and certainly worth looking at. Boy, oh boy... I don't know about the Robust... Never seen one in person, but given that price is a wash comparing with Oneway (which is an inevitable comparison given the design of the Robust), I'd have to lean toward Oneway for several reasons: - Lathe weight is a big deal when comparing lathes of like swing capacities. The Robust 2528 weighs about 625 lbs. vs. the Oneway 2436 at 850 lbs. - The Oneway leg design appears more stable. The adjustability of the Robust height introduces sliding parts that will inevitably flex more than solid/welded joints. (A Oneway height is customizable when ordering for no additional charge.) - No through bore on the Robust tailstock. - Swinging pendant arm on the Oneway would appear to offer better control placement and better control box security from mishaps. (Too, the Oneway box is much more refined and finished looking than the Robust - plus an $80 secondary remote box is available for the Oneway.) - Consider the following descriptions from Robust's website: 25 x 28: Our top-of-the-line sliding headstock model. 18 x 28: Shares many features of its big brother, the 25x28, only with a smaller swing. Sweet 16: The newest Robust lathe... Spindle turners like the 36 between centers. .... spindle turners like the 36" between centers. Yes we do, so why limit their top of the line lathe with 28"? Sure, you can purchase additional bed extensions, but that adds $645 on top of the $5300 2hp base price. How much of a Oneway can you buy for $6000? How does top of the line 3hp, with 17" extension and money to spare for other stuff strike you? (BTW, the spec sheet pdfs for all the Robust lathes have a footnote "(2)" at the "Center Distance" item, but I couldn't find what the footnote marker was referring to...) These notes are merely observations from my reading and looking over the pictures. I commend the Robust people for taking a risk in producing the lathe. Inevitably, in the price range they have chosen, they will be compared to Oneway, Stubby and even the VB36. It's my opinion the Robust just doesn't have the "whole-package" engineering or refinement to compete on this level. I think they'd have a killer lathe if they could manage to get the price down at least $1000. -- Owen Lowe Northwest Woodturners Pacific Northwest Woodturning Guild ___ Tips fer Turnin': Place a sign, easily seen as you switch on your lathe, warning you to remove any and all rings from your fingers. Called degloving, extended hardware can grab your ring and rip it off your finger. A pic for the strong of stomach: www.itim.nsw.gov.au/go/objectid/2A3AC703-1321-1C29-70B067DC88E16BFC/index.cfm Besides, rings can easily mar the surface of a turning as you check for finished smoothness. |
Robust Tools Lathes
In article .com,
" wrote: Seen that lathe before, thought they had gone bankrupt, someone buy them out ??? I suspect you may be thinking of the Serious Lathe. http://www.seriouslathe.com/wood_lathes.php The company didn't go bankrupt, but was sold to other folks a year or two ago after years of struggling along as a second business to the designing engineer. The Serious lathe is really quite well designed and very solid. It would give all the top makers a run for the money if they can get more market penetration and presence outside the Pacific Northwest. BTW, I really like their camlock tool handle - I hate searching for allen wrenches!!! Gotta pick me up another one of those one of these days... Come to think of it that would be a problem though. That was one of my concerns with Serious when I was considering my last lathe purchase. Oneway has such a good reputation as well as decent longevity in the business that I had to weight my decision in that direction. -- Owen Lowe Northwest Woodturners Pacific Northwest Woodturning Guild ___ Tips fer Turnin': Place a sign, easily seen as you switch on your lathe, warning you to remove any and all rings from your fingers. Called degloving, extended hardware can grab your ring and rip it off your finger. A pic for the strong of stomach: www.itim.nsw.gov.au/go/objectid/2A3AC703-1321-1C29-70B067DC88E16BFC/index.cfm Besides, rings can easily mar the surface of a turning as you check for finished smoothness. |
Robust Tools Lathes
If I were going to drop 5k+ on a lathe, I'd turn on all the competitors
before I made the big decision. You wouldn't buy a car without test driving it -- would you? Bill Owen Lowe wrote: In article .com, " wrote: Seen that lathe before, thought they had gone bankrupt, someone buy them out ??? I suspect you may be thinking of the Serious Lathe. http://www.seriouslathe.com/wood_lathes.php The company didn't go bankrupt, but was sold to other folks a year or two ago after years of struggling along as a second business to the designing engineer. The Serious lathe is really quite well designed and very solid. It would give all the top makers a run for the money if they can get more market penetration and presence outside the Pacific Northwest. BTW, I really like their camlock tool handle - I hate searching for allen wrenches!!! Gotta pick me up another one of those one of these days... Come to think of it that would be a problem though. That was one of my concerns with Serious when I was considering my last lathe purchase. Oneway has such a good reputation as well as decent longevity in the business that I had to weight my decision in that direction. |
Robust Tools Lathes
If I was going to drop 5K on a lathe (drool, drool, drool) my wife would
drop me :-) The test drive is all I would get. One of these days though, the kids will all be finished college, and then... -- God bless and safe turning Darrell Feltmate Truro, NS Canada www.aroundthewoods.com "Bill Rubenstein" wrote in message om... If I were going to drop 5k+ on a lathe, I'd turn on all the competitors before I made the big decision. You wouldn't buy a car without test driving it -- would you? Bill Owen Lowe wrote: In article .com, " wrote: Seen that lathe before, thought they had gone bankrupt, someone buy them out ??? I suspect you may be thinking of the Serious Lathe. http://www.seriouslathe.com/wood_lathes.php The company didn't go bankrupt, but was sold to other folks a year or two ago after years of struggling along as a second business to the designing engineer. The Serious lathe is really quite well designed and very solid. It would give all the top makers a run for the money if they can get more market penetration and presence outside the Pacific Northwest. BTW, I really like their camlock tool handle - I hate searching for allen wrenches!!! Gotta pick me up another one of those one of these days... Come to think of it that would be a problem though. That was one of my concerns with Serious when I was considering my last lathe purchase. Oneway has such a good reputation as well as decent longevity in the business that I had to weight my decision in that direction. |
All times are GMT +1. The time now is 04:09 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter