All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill

I've had several replies and thank the folks. But, I guess that I
didn't make myself clear --

What I need most are the dimensions which don't show up in any lists of
machines and spindles -- the two which I've marked in the photo:
http://www.stubbylatheusa.com/images...e_question.jpg.

Bill

Bill Rubenstein wrote:
All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill

In article ,
Bill Rubenstein wrote:

I've had several replies and thank the folks. But, I guess that I
didn't make myself clear --

What I need most are the dimensions which don't show up in any lists of
machines and spindles -- the two which I've marked in the photo:
http://www.stubbylatheusa.com/images...e_question.jpg.

which models have you gotten so far?

--
Owen Lowe

Northwest Woodturners
Pacific Northwest Woodturning Guild
___
Tips fer Turnin': Place a sign, easily seen as you switch on your lathe, warning you to remove any and all rings from your fingers. Called degloving, extended hardware can grab your ring and rip it off your finger. A pic for the strong of stomach: www.itim.nsw.gov.au/go/objectid/2A3AC703-1321-1C29-70B067DC88E16BFC/index.cfm

Besides, rings can easily mar the surface of a turning as you check for finished smoothness.

Powermatic 3520a

Bill

Owen Lowe wrote:
In article ,
Bill Rubenstein wrote:

I've had several replies and thank the folks. But, I guess that I
didn't make myself clear --

What I need most are the dimensions which don't show up in any lists of
machines and spindles -- the two which I've marked in the photo:
http://www.stubbylatheusa.com/images...e_question.jpg.

which models have you gotten so far?

Tek


Teknatool DVR

1.25 X 8

1- 1.195
2- 0.125
3- 0.365 Last thread to shoulder

Walt A

On Sun, 13 Aug 2006 21:04:53 GMT, Bill Rubenstein
wrote:

I've had several replies and thank the folks. But, I guess that I
didn't make myself clear --

What I need most are the dimensions which don't show up in any lists of
machines and spindles -- the two which I've marked in the photo:
http://www.stubbylatheusa.com/images...e_question.jpg.

Bill

Bill Rubenstein wrote:
All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill

Walt's #3 makes sense as a way to deal with the rebate for locking screws.

Bill

Walt & Jenne Ahlgrim wrote:
Tek


Teknatool DVR

1.25 X 8

1- 1.195
2- 0.125
3- 0.365 Last thread to shoulder

Walt A

On Sun, 13 Aug 2006 21:04:53 GMT, Bill Rubenstein
wrote:

I've had several replies and thank the folks. But, I guess that I
didn't make myself clear --

What I need most are the dimensions which don't show up in any lists of
machines and spindles -- the two which I've marked in the photo:
http://www.stubbylatheusa.com/images...e_question.jpg.

Bill

Bill Rubenstein wrote:
All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill

"Bill Rubenstein" wrote in message
. com...
All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill



What are you making Bill? Thanks in advance for responding.....:-)


--

Regards,
M.J. (Mike) Orr
http://members.shaw.ca/approachingart

Something which I think the market needs. Stubby owners (or non-owners
too) who are members of the Stubby Users' Group can probably guess but
I'd rather not say for now.

Bill

M.J. wrote:
"Bill Rubenstein" wrote in message
. com...
All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill



What are you making Bill? Thanks in advance for responding.....:-)

Ya I'm like that too sometimes. Let me know if you can guess my lathe's
measurements because I'd rather not tell you for now..... :^)

--

Regards,
M.J. (Mike) Orr
http://members.shaw.ca/approachingart


"Bill Rubenstein" wrote in message
m...
Something which I think the market needs. Stubby owners (or non-owners
too) who are members of the Stubby Users' Group can probably guess but I'd
rather not say for now.

Bill

M.J. wrote:
"Bill Rubenstein" wrote in message
. com...
All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill



What are you making Bill? Thanks in advance for responding.....:-)

I understand your position -- but...

If I say what I'm developing, then some other manufacturer has a head
start and I suddenly have competition to deal with.

There are a number of manufacturers who have no interest in fair play --
for instance...

Jet has just introduced a slow speed grinder which looks a lot like the
Tormec.

Jet has a live center which looks a whole lot like the Oneway.

Jet isn't the only one but they certainly may be the champions in this area.

So, I'd rather not have the information from your lathe than give away
what I'm working on. Does that make sense to you?

Bill

M.J. wrote:
Ya I'm like that too sometimes. Let me know if you can guess my lathe's
measurements because I'd rather not tell you for now..... :^)

Hi Bill, You are much respected here as a valued contributor and as an
ethical and sucessful businessman. Your request is perfectly
reasonable, but to keep your invention secret why would you ask the
questions on a widespread ng? The internet being what it is, I doubt
that you will rely on the answers anyway (no slam at respondents
intended). I know you don't need a vanity product so it is likely of
enough potential to meet the profit plans of larger manufacturers. If
not it would seem to be another hunting license for quick copying by mom
& pops. I suppose the secrecy could be a legitimate way to generate
interest, but it is obvious that I know very little re this facet of our
craft.

Bill, many of us have ideas for a product related to woodturning with
high hopes for a sucessful whizbang, but most of us are naive and lack
your proven expertise. Without revealing your product and time allowing,
would you consider offering some guidance (or a musing 'G') re the
rewards, pitfalls and necessaries of attempting to develop and/or market
an innovative woodturning product? Others _with experience_ might want
to chip in unless derision masked by comedy drives them away.


Turn to Safety, Arch
Fortiter


http://community.webtv.net/almcc/MacsMusings

Hello Bill,

I intended to respond to your post when you first made it, but didn't
have time and then forgot. For what it is worth, here are the
dimensions for my lathes:

Nova DVR 3000, 1-1/4" x 8 tpi spindle. Dim. 1= 1-3/16". Dim. 2= 0.15"

Nova Mercury, 1" x 8 tpi spindle. Dim. 1= 15/16". Dim. 2 = 1/4"

Oneway 1018, 1" x 8 tpi spindle. Dim. 1= 1-1/4". Dim. 2 = 1/8"

Hope this helps.

Fred Holder
http://www.fholder.com


Bill Rubenstein wrote:
I understand your position -- but...

If I say what I'm developing, then some other manufacturer has a head
start and I suddenly have competition to deal with.

There are a number of manufacturers who have no interest in fair play --
for instance...

Jet has just introduced a slow speed grinder which looks a lot like the
Tormec.

Jet has a live center which looks a whole lot like the Oneway.

Jet isn't the only one but they certainly may be the champions in this area.

So, I'd rather not have the information from your lathe than give away
what I'm working on. Does that make sense to you?

Bill

M.J. wrote:
Ya I'm like that too sometimes. Let me know if you can guess my lathe's
measurements because I'd rather not tell you for now..... :^)

Powermatic 3520a:
1 1/4 x 8
dimension #1: 1.454"
dimension #2: 0.165"
There is also a recess cut to below the threads (for faceplate setscrews) from the left of
the dimension 2 marks to the right end of the threads that is 0.286".

Matt Heffron

"Bill Rubenstein" wrote in message
. com...
All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill

Thanks. So the total spindle length from the place where a faceplate
would snug up to to the end of the threads is 1.454 + .286? I hadn't
thought about the setscrew stuff.

Bill

Matt Heffron wrote:
Powermatic 3520a:
1 1/4 x 8
dimension #1: 1.454"
dimension #2: 0.165"
There is also a recess cut to below the threads (for faceplate setscrews) from the left of
the dimension 2 marks to the right end of the threads that is 0.286".

Matt Heffron

"Bill Rubenstein" wrote in message
. com...
All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill

Nope. The total spindle length is the 1.454.
Matt
"Bill Rubenstein" wrote in message
t...
Thanks. So the total spindle length from the place where a faceplate
would snug up to to the end of the threads is 1.454 + .286? I hadn't
thought about the setscrew stuff.

Bill

Matt Heffron wrote:
Powermatic 3520a:
1 1/4 x 8
dimension #1: 1.454"
dimension #2: 0.165"
There is also a recess cut to below the threads (for faceplate setscrews) from the
left of
the dimension 2 marks to the right end of the threads that is 0.286".

Matt Heffron

"Bill Rubenstein" wrote in message
. com...
All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill

On Sun, 13 Aug 2006 02:53:26 GMT, Bill Rubenstein
wrote:

All:

I need some measurements from various lathes -- if you could report:

Make and model of your lathe

Delta 12" gap-bed lathe, model #46-546
Spindle - 1" x 8 tpi
Dimension 1 - 13/16"
Dimension 2 - none (threaded all the way to spindle nut)

Delta Midi lathe. model #46-250
Spindle - 1" x 8 tpi
Dimension 1 - 1"
Dimension 2 - 3/16"

Spindle size and thread pitch (i.e. 1 1/4 x 8)

Dimensions 1 and 2 from the photo --
http://stubbylatheusa.com/images/spindle_question.jpg

it would be most helpful. The photo is of a much used Stubby so I have
that information.

Thanks in advance to those responding.

Bill

Woodfast MC908
1-1/4 X 8
Dim. 1 - 0.992
Dimi. 2 - 0 (There is no shoulder on the shaft before the spindle nut.)

Tom:

Thanks.

Bill

Tom Weber wrote:
Woodfast MC908
1-1/4 X 8
Dim. 1 - 0.992
Dimi. 2 - 0 (There is no shoulder on the shaft before the spindle nut.)

Jet JML-1014 Mini Lathe
1 X 8
Dim #1 - 0.998
Dim #2 - 0.183

Bill, be aware that there is not shoulder (or step) on the shaft. The
two measurements I gave are the total shaft length, and the length of
the unthreaded portion.

Tom:

Thanks.

Can somebody get me the measurements on the 16" Jet? I believe that the
spindle is quite long on that machine.

Bill

Tom Weber wrote:
Jet JML-1014 Mini Lathe
1 X 8
Dim #1 - 0.998
Dim #2 - 0.183

Bill, be aware that there is not shoulder (or step) on the shaft. The
two measurements I gave are the total shaft length, and the length of
the unthreaded portion.