DIYbanter - Foot wear

Tom Nie wrote:

Bertie, for a blown apart ankle generally fused together to form an ankle
I thoroughly understand your running shoes comment BUT only when the soles
are like a TRUE Air Jordan's. That's to say Nike in their infinite wisdom
have kept the name but not the construction (latest trip to the shoe store
revealed). God knows, those kind of shoes are fadish and change more than
women's fashions.

There's another very soft sole that you can squeeze at the heel plate to
feel the difference that works tremendously to reduce jarring the joint.
Most, almost all, of the others have foam soles but a different kind which
tends to dampen only slightly and compact with age on the contact edge
creating uneven support (that ankle angles to the right some). Maybe some
expert will read this and give us more specific nomenclature. Regardless,
suffice to say I have a sensitivity to shoes and their construction that's
abnormal.

The only kind of casual dress shoe I've found, only recently, is an
ungodly expensive ECCO brand. It has my preferred sole but cost $160! But
they are outstandingly comfortable. I'm sure there's merit to all the
other posts but I haven't tried them.

I also found out about ECCO a few years back--just seem to fit me and the
sizing is very consistent.

Also seem to be quite durable--my first pair with no care at all is still
fine structurally, although they look like they've been through a war.

Note that they have several insoles available and that they are
interchangeable--the ones that came in my boots were quite slippery, which
is NFG hiking in New England--a call to ECCO got me a new set that were
much more satisfactory.

For your first pair you pretty much need to go to a store and try them and
pay the price to be sure you've got the right size (they're European sizes
by the way), after that you can order online if you can find your size and
style.

And bear in mind that what works for me may not work for you.

TomNie

Bertie Pittman wrote in message
...
On 11 Jan 2006 06:41:17 -0800, "vdubbs" wrote:

I would like to ask those of you who have work areas that are on some
form of concrete, what kind of shoes do you wear while there? Do you

From my own experience with foot and back aches I've found that I am
most comfortable on concrete when I wear a good pair of running shoes
or a good pair of sneakers that have some arch support and good thick
rubber soles. I sometimes find that foam or gel inserts also help.

The footwear industry seem to make a lot of worthless junk IMO and
what works for many don't always work for me. Some of the most
expensive and highly rated have not been any better for me than
cheaper brands or different kinds of shoes . I've only found them by
continued trial and error.

Although they aren't safety shoes , when standing at the lathe for
long periods of time I now wear a pair of New Balance tennis shoes but
I've had other brands that worked just as well. For me, my shoes have
be comfortable first for general walking then hopefully they'll
continue to support and be comfortable after extended standing or work
on concrete or steel. I also have foam type pad that's made to stand
on in front of my lathe and my band saw. And I learned from a lady
that used to post regularly in this newsgroup about sweeping the
shavings pile up in front of my lathe to stand on. The only problem
with that idea was my dogs likes those shavings piles and I'd have to
be constantly jousting with them or just work with them underfoot. :)

It may also be more than just shoes involved. Notwithstanding any
medical condition, age seems to make a difference also, more than
one's weight IMO. After becoming a wood turner I had terrible back
aches from bending over on the lathe. But after I learned about
raising the lathe high enough so the center line between the spur and
tail stock was about as high as my elbow or a little higher there are
no more back aches. That tip gleaned here also prompted me to also
raise many other things in my life such as band saws, bench grinders,
work benches, tables, etc.. even my fish cleaning bench is now much
higher and I'm more comfortable for sure!

I also know a teacher that is on her feet all day on concrete or tiled
floors. She is a larger lady and has had trouble with her feet hurting
over the years. She now wears and swear's by Birkenstocks. But she
only wears the "sandal" types, not safety shoes.

Bertie

--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)