Ashley Isles Gouges...
Was looking over the Isles selection of gouges - sorta curious about the
brand as I've heard good comments but haven't looked into them before. In the process I came across a term that leaves me a little perplexed: Mario Rodriguez's 1.25" shallow spindle gouge in HSS ($116): "The sheer size and weight of the tool makes it a bit expensive, but the heft makes it easy to control. It's a production tool for the occasional turner. 1-1/4" (37 mm) wide." http://www.toolsforworkingwood.com/M...creen=PROD&Sto re_Code=toolshop&Product_Code=IT-MARIO125&Category_Code=WIP They've used the same "for the occasional turner" comment for at least one other Isles tool - what do you think this means? How can you have a "production tool" but for "occasional turning"? -- Owen Lowe Northwest Woodturners, Cascade Woodturners, Pacific Northwest Woodturning Guild ___ Safety Tip'o'th'week: Never grind aluminum and steel or iron on the same machine or workstation - Thermite. http://www.hanford.gov/lessons/sitell/ll01/2001-36.htm |
"Owen Lowe" wrote in message ... They've used the same "for the occasional turner" comment for at least one other Isles tool - what do you think this means? How can you have a "production tool" but for "occasional turning"? I think they realize that hobby turners outnumber professionals. Sort of like the "extras" involved in packing up a bunch of chunks of steel into a box, it's euphony, pleasant sounds designed to cover the lack of significance. |
Hello Owen,
I believe that "for the occasional turner" is ment to imply that it is a very good production tool, even if you are only a hobby turner. I agree with them that it is an excellent spindle tool. Not a bowl gouge mind you, but a spindle gouge. I have one that my wife quickly acquired for her tool kit. She allows me to borrow it occasionally, guess that makes me an occasional turner. If you are turning lots of spindles this is an excellent tool that will do the work of most spindle tools. It is too big to turn small coves however. Fred Holder http://www.fholder.com In article , Owen Lowe says... Was looking over the Isles selection of gouges - sorta curious about the brand as I've heard good comments but haven't looked into them before. In the process I came across a term that leaves me a little perplexed: Mario Rodriguez's 1.25" shallow spindle gouge in HSS ($116): "The sheer size and weight of the tool makes it a bit expensive, but the heft makes it easy to control. It's a production tool for the occasional turner. 1-1/4" (37 mm) wide." http://www.toolsforworkingwood.com/M...creen=PROD&Sto re_Code=toolshop&Product_Code=IT-MARIO125&Category_Code=WIP They've used the same "for the occasional turner" comment for at least one other Isles tool - what do you think this means? How can you have a "production tool" but for "occasional turning"? |
Owen Lowe wrote:
They've used the same "for the occasional turner" comment for at least one other Isles tool - what do you think this means? How can you have a "production tool" but for "occasional turning"? My take on it is that they mean this as a tool for someone who turns occasionally in a production environment, i.e. a production woodworker who occasionally needs to turn items, but doesn't want or need to amass the bewildering array of tools we woodturners do, but would rather have just one or two that will cover most of his needs. TBH it looks a bit like the kind of gouge whatsisname on the New Yankee Workshop uses for absolutely *everything* he turns. -- Alun Saunders |
Have you noticed that advertising hype is sometimes murky and meaningless if
you really pay attention to what is said? I think that may be the case here. Barry "Owen Lowe" wrote in message ... Was looking over the Isles selection of gouges - sorta curious about the brand as I've heard good comments but haven't looked into them before. In the process I came across a term that leaves me a little perplexed: Mario Rodriguez's 1.25" shallow spindle gouge in HSS ($116): "The sheer size and weight of the tool makes it a bit expensive, but the heft makes it easy to control. It's a production tool for the occasional turner. 1-1/4" (37 mm) wide." http://www.toolsforworkingwood.com/M...creen=PROD&Sto re_Code=toolshop&Product_Code=IT-MARIO125&Category_Code=WIP They've used the same "for the occasional turner" comment for at least one other Isles tool - what do you think this means? How can you have a "production tool" but for "occasional turning"? -- Owen Lowe Northwest Woodturners, Cascade Woodturners, Pacific Northwest Woodturning Guild ___ Safety Tip'o'th'week: Never grind aluminum and steel or iron on the same machine or workstation - Thermite. http://www.hanford.gov/lessons/sitell/ll01/2001-36.htm |
In article ,
Fred Holder wrote: I believe that "for the occasional turner" is ment to imply that it is a very good production tool, even if you are only a hobby turner. I agree with them that it is an excellent spindle tool. Not a bowl gouge mind you, but a spindle gouge. I have one that my wife quickly acquired for her tool kit. She allows me to borrow it occasionally, guess that makes me an occasional turner. If you are turning lots of spindles this is an excellent tool that will do the work of most spindle tools. It is too big to turn small coves however. Thank you Fred - and Barry, George and Alun - I can see the twist to the wording now. Ain't language fun? Years ago I met a fellow whose kid worked for a major sunglasses maker- he mentioned that the company made available their products free of charge to the blind. I thought it was the most cruel joke I had heard - why in the world would they advertise such an unused benevolence? I mean, for cryin' out loud, blind people can't see so they don't need to cut the glare or protect against UVa/b rays. ... On the order of, "we provide free Nike sneakers to double leg amputees." It took some language interpretation and explanation to point out that blind people use sunglasses for others looking at them and not the other way around. Made perfect and obvious sense once it was reworded. (BTW, I realize amputees may indeed have a use for Nike sneakers but on the surface...) -- Owen Lowe Northwest Woodturners, Cascade Woodturners, Pacific Northwest Woodturning Guild ___ Safety Tip'o'th'week: Never grind aluminum and steel or iron on the same machine or workstation - Thermite. http://www.hanford.gov/lessons/sitell/ll01/2001-36.htm |
All times are GMT +1. The time now is 06:29 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter