Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Rotozip bits
Where can I get rotozip bits from?
Are the omnisaw bits from screwfix compatible? Thanks -- Tony Collins |
#2
|
|||
|
|||
Rotozip bits
I allways thought they were 3.2mm
"Simon" wrote in message ... "Tony Collins" wrote in message .. . Where can I get rotozip bits from? Are the omnisaw bits from screwfix compatible? Thanks -- Tony Collins To my knowledge, the shanks are 3mm, dremel dits fit (and do a similar spiral cutter) and trend also do 3mm shanked cutters, basically any 3mm shanked bit will fit. |
#3
|
|||
|
|||
Rotozip bits
"Frank" wrote in message ... I allways thought they were 3.2mm Yep, you're right, still fit :-) |
#4
|
|||
|
|||
Rotozip bits
Thanks all
-- Tony Collins "Simon" wrote in message ... "Frank" wrote in message ... I allways thought they were 3.2mm Yep, you're right, still fit :-) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|