UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Stefek Zaba
 
Posts: n/a
Default At last - a use for WD40

Turns out WD40 is an effective solvent for the glue - both dried-out and
still-sticky - on an unidentified flavour of double-sided foamy tape.

How did I discover this, I hear you ask? Well... the place we're coming
up to 5 years in has some built-in wardrobes, with mirrored doors
(smoked, unfortunately, which reduces their utility). I guess they were
put in maybe 10 years ago - they postdate the house itself (20odd yrs).
Each mirrored door is 50cm wide and floor-to-ceiling high; the mirrors
are stuck to the chip doors with 7? strips of double-sided foamy tape.
Those held long enough to avoid the installers being called back by
whichever previous owner had the work done; but as of today, all three
of the doors on the side which gets more sun, and two of the four on the
other side, have slipped down and needed regluing with Something Better.
Only two left to replace - and they're showing the first signs of
slipping down; fortunately, they don't detach suddenly, spectacularly,
and mirror-smashingly, but rather droop slowly off the doors.

So, there's an all-too-well-established ritual here - complete the
mirror detachment which time&gravity have set in place, take the door
off its piano hinges (thank the Pope for the light electric screwdriver
whose praises I sung here a few days back - there's forty-odd of the
little bleeders ;-), scrape off the remains of the dbl-sided tape. For
the door - Contiboard or similar - mere mechanical scraping is pretty
much all that's needed, as one can give it the requisite welly on a
surface which'll be hidden (and the odd scratch on will just improve the
keying of the replacement glue). The mirrors, though, have silvering you
really don't want to scratch off! So, I've tried a variety of solvents
on previous occaisions. The most effective has been a label-remover from
?Canford Audio? called At-Tack, but there's not much of that left in the
bottle... So, I got all systematic, trying
- meths
- the old grotty Dutch gin I'd already use on the doors
- WD40
- and the At-Tack
on the first 4 strips, leaving it to soak for a few minutes.
Surprisingly, the WD40 was the most effective, closely followed by the
precious At-Tack, while the two alcohols didn't soften and release the
adhesive much at all. The remaining 3 strips and the ones less well
removed by the alcohols came off well with the WD40; a final coating of
isopropyl alcohol and wiping up quickly with kitchen roll removed the
residue of WD40 well enough.

The adhesive I've used - today and on each of the four previous mirrors
- is 'Timebond', a thixotropic contact adhesive, which gives a tiny bit
of repositioning capability; 'tiny' because the combination of weight
and considerable surface area - a tad over 1sqm - means the mirror
doesn't exactly 'slide' over the door once it's lying on it, but a
couple millimeters of straightening up is possible.

And yes, I've had the windows wide open on both sides of the bedroom, to
let the glorious mix of: WD40, ethanol, methanol, At-Tack, isopropanol,
and toluene (the Timebond solvent) at least mostly disappear before
bedtime! Ahh, organic solvents [cue Homer Simpson noise... ;-]

Stefek
  #2   Report Post  
Magician
 
Posts: n/a
Default

I think WD40 is great stuff & I use it all the time - so there :-)

Dave

  #3   Report Post  
s--p--o--n--i--x
 
Posts: n/a
Default

On Mon, 28 Mar 2005 22:45:37 +0100, Stefek Zaba
wrote:

Turns out WD40 is an effective solvent for the glue - both dried-out and
still-sticky - on an unidentified flavour of double-sided foamy tape.


I think the WD40 instruction leaflet details glue removal...anyhoo, I
have used tit for removing glue for many years.

sPoNiX
  #4   Report Post  
:::Jerry::::
 
Posts: n/a
Default


"Magician" wrote in message
ps.com...
I think WD40 is great stuff & I use it all the time - so there :-)


You build a lot of space-craft do you ?!...

There are few uses for WD40, most of the uses people put it to are
nothing but miss-uses, and bit like that god dammed awful CopperSlip
'grease'.


  #5   Report Post  
Justin Time
 
Posts: n/a
Default


"s--p--o--n--i--x" wrote in message
...
On Mon, 28 Mar 2005 22:45:37 +0100, Stefek Zaba
wrote:

Turns out WD40 is an effective solvent for the glue - both dried-out and
still-sticky - on an unidentified flavour of double-sided foamy tape.


I think the WD40 instruction leaflet details glue removal...anyhoo, I
have used tit for removing glue for many years.

sPoNiX


I hope your wife dosn't mind you using her body parts for removing glue




  #6   Report Post  
:::Jerry::::
 
Posts: n/a
Default


"Justin Time" wrote in message
...
"s--p--o--n--i--x" wrote in message
...

snip

I think the WD40 instruction leaflet details glue

removal...anyhoo, I
have used tit for removing glue for many years.


I hope your wife dosn't mind you using her body parts for removing

glue


He/she might have been using their own for all you know.....


  #7   Report Post  
John
 
Posts: n/a
Default


":::Jerry::::" wrote in message
...

"Justin Time" wrote in message
...
"s--p--o--n--i--x" wrote in message
...

snip

I think the WD40 instruction leaflet details glue

removal...anyhoo, I



check out
http://wd40.co.uk/

it claims 2,000 uses one of which is removing glue from lino (not exactly a
space age app). Also in French, Spanich and Dutch and Deutsch.


john


  #8   Report Post  
raden
 
Posts: n/a
Default

In message , s--p--o--n--i--x
writes
On Mon, 28 Mar 2005 22:45:37 +0100, Stefek Zaba
wrote:

Turns out WD40 is an effective solvent for the glue - both dried-out and
still-sticky - on an unidentified flavour of double-sided foamy tape.


I think the WD40 instruction leaflet details glue removal...anyhoo, I
have used tit for removing glue for many years.

Lucky you !

--
geoff
  #9   Report Post  
Chris Hodges
 
Posts: n/a
Default

Other good glue removers are lamp oil (basically paraffin but not as
smelly) and cheap (christmas present!) aftershave (especially good on
gaffa tape glue).

--
Spamtrap in use
To email replace 127.0.0.1 with blueyonder dot co dot uk
  #10   Report Post  
Lobster
 
Posts: n/a
Default

John wrote:

check out
http://wd40.co.uk/

it claims 2,000 uses one of which is removing glue from lino (not exactly a
space age app). Also in French, Spanich and Dutch and Deutsch.


Not to mention the WD40 E-tip of the day!!! Wait for it:

http://wd40.co.uk/utilities/wd40/pop...?articleid=271

As well as that, 'Handy Andy' thinks its fab, so it must be good,
mustn't it?

David


  #11   Report Post  
 
Posts: n/a
Default

bad link

  #12   Report Post  
Brian G
 
Posts: n/a
Default

Magician wrote:
I think WD40 is great stuff & I use it all the time - so there :-)

Dave



It's great for removing silicone mastic from your hands etc.

Brian G


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 05:01 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"