Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Ancient HW Cylinder - replacement
We have a an old solid fuel heating system (which works well and
cheaply too), but the hot water cylinder has corroded and is now leaking. The plumber who came to look at it said we needed a 'specially made' cylinder for solid fuel heating and was going to order one but he's been rushed into hospital. I think I could do this job myself if all I had to do was disconnect it and reconnect the new cylinder....but I suspect the connections are old BSP fittings rather than metric which might complicate things a bit. Suggestions for a supplier would be helpful, and am I likely to be able to get a cylinder with suitable threads on the connections ? TIA |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing hot water cylinder. | UK diy | |||
Pipe run between Cold water tank and hot water cylinder. | UK diy | |||
Hot Water Cylinder | UK diy |