Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Hello,
Has any one had a similar problem to this with the ChannelPlus XL controller: on two or possibly three occasions in the last few months, my controller has appeared to have reset itself in some way - the time has changed apparently randomly (more than 24 hours change) and the timings have reset to the factory settings. There has not been any power cut sufficient to cause problems on any other electrical systems in the house. The controller is about 4 years old. Before I contact Horstmann, I thought I'd ask for any comments here. Regards, Colin -- Colin Brook - Winchester (UK) Fax:+44(0)8701641293 Mobile:07976258703 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Replacing my Potterton EP2000 boiler controller with a Horstmann - wiring question ? | UK diy | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with room getting too hot from facing the south (even in late October) | Home Repair | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Ownership | |||
CRT Contrast Problem | Electronics Repair |