|
Region 1 DVD Disk Errors
Can anyone advise me as to why a Region 1 DVD disk won't play without jumping -
on DVD players which have been "made" multiregion? I have a DVD import which seems to play for about 15 - 20 minutes then starts jumping. This happens on 2 different DVD players so it can't be the DVD. When the DVD is placed in another DVD - or the same scene played at a later date it doesn't jump. So it can't be the disk? |
KKEVINRCARTER wrote:
Can anyone advise me as to why a Region 1 DVD disk won't play without jumping - on DVD players which have been "made" multiregion? I have a DVD import which seems to play for about 15 - 20 minutes then starts jumping. This happens on 2 different DVD players so it can't be the DVD. When the DVD is placed in another DVD - or the same scene played at a later date it doesn't jump. So it can't be the disk? It could still be the disc, it might have encoding errors that cause problems on some players but not others. I have a couple of R2 discs with a slightly corrupted mpeg data stream that crash one of my Philips players*, but play fine on the PC. *It seems to accumulate the errors up to the point where it freezes, incidentally about 20 mins too... Play the disc from 10 mins in, and it crashes at 30 mins... Lee -- Email address is valid, but is unlikely to be read. |
"KKEVINRCARTER" wrote in message ... Can anyone advise me as to why a Region 1 DVD disk won't play without jumping - on DVD players which have been "made" multiregion? I have a DVD import which seems to play for about 15 - 20 minutes then starts jumping. It may be intended. I recall discussions on this 'technology' (sic) in the electronics trade press some time ago and I presume somebody may have decided to use it. What is the DVD ? |
weve found Xine in linux will play Region 1 DVDs with no problem. - just
plug the l;aptop into the back of the TV. Someones bundled a CD of linux DVD playing programmes - I'll have a hunt. in the meantime try Knoppix (www.knoppix.org) |
The DVD is "Dead Like Me" a black comedy series shown on Sky last year - not
yet released in UK on DVD yet hence the Region 1 copy (xmas present). Incidentally this DVD is part of a boxed set and the one causing problems features the "pilot" episode - the other DVDs appear to work okay!! |
"KKEVINRCARTER" wrote in message ... The DVD is "Dead Like Me" a black comedy series shown on Sky last year - not yet released in UK on DVD yet hence the Region 1 copy (xmas present). Incidentally this DVD is part of a boxed set and the one causing problems features the "pilot" episode - the other DVDs appear to work okay!! Wouldn't have thought they'd kybosh just one disc. Sounds like a genuine fault. Can you download the files onto your PC hard disc and see if they play from there or register as corrupt. |
KKEVINRCARTER wrote:
Can anyone advise me as to why a Region 1 DVD disk won't play without jumping - on DVD players which have been "made" multiregion? No reason why it should unless the disc is faulty or there is something wrong with the player. I have a DVD import which seems to play for about 15 - 20 minutes then starts jumping. This happens on 2 different DVD players so it can't be the DVD. Not sure I follow that logic. Surely they suggests it *is* likely to be the DVD? When the DVD is placed in another DVD - or the same scene played at a later date it doesn't jump. So it can't be the disk? The disc could be marginal - the scene in question having a higher error rate. Sometimes the players error correction manages to sort it out, sometimes it does not. You may also find some players are repeatably more reliable than others. (remember that every time the laser reads the DVD data, there is no guarantee that it will read the same thing each time. It is down to the forward error correction information that is encoded along with the data, and post processing by the drives firmware, to sort out the mess and hopefully present a correct and consistent data stream. A manufacturing defect in the disc can result it the system being pushed right to the threshold, hence sometimes it works sometimes it don't!) -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
I have to cut a 6" diameter hole through both sides of a cavity wall. to fit
an extractor fan. Before I go and hire a core drill, what's the possibility of drilling a large number of closely-spaced small holes and then attacking the wall - first inside, then out - with a large hammer and a masonry chisel? Bert http://www.bertcoules.co.uk |
Bert Coules wrote:
I have to cut a 6" diameter hole through both sides of a cavity wall. to fit an extractor fan. Before I go and hire a core drill, what's the possibility of drilling a large number of closely-spaced small holes and then attacking the wall - first inside, then out - with a large hammer and a masonry chisel? I'd be inclined to drill 1 hole dead in the centre of the circle, right through both leaves. Then you can measure off 3" right round the centre and drill the holes - alternatively, use a 6" cardboard circle, fixed at where the hole was drilled. That way you'll guarantee that both holes will meet in the same place. :) Hammer and masonary chisel too! I'd think that a 6" core drill is probably going to have a *LOT* of torque, and could be difficult to hold, especially if you're up a ladder... -- Reply address is spamtrapped. Remove theobvious for valid e-mail address |
| All times are GMT +1. The time now is 09:45 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter