Paint stripping advice?
 

Been using paint stripper today to remove some ancient paint from my garage
frame. Not a pleasant experience - damn messy stuff and it burns if you
don't notice it drop on your skin!!

So ... I'm now looking for an electric stripper :o) .. and yes, we're
still talking about paint!

Dropped into HomeBase on the way home and they only had a single brand
there. Can't remember what it was but I'd never heard of it. It cost £15
and was 1500W. Didn't buy it as it looked a bit crap!

My question is what you get for money - should I pay more for a better one
elsewhere? Is it just a case of any old one will do? If quality matter,
any advice on what to get? I don't want to spend too much as I won't be
doing a huge amount with it. Just occasional refresh work.



a

Paint stripping advice?
 

OK, so Heatgun is the correct term for it! Found two:

http://www.screwfix.com/app/sfd/cat/...12296&ts=91603
http://www.screwfix.com/app/sfd/cat/...14303&ts=91603

One's a DeWalt (£13 more) and the other is a Ferm. Anyone used either?


a

Paint stripping advice?
 

al wrote in message
...
Been using paint stripper today to remove some ancient paint from my
garage
frame. Not a pleasant experience - damn messy stuff and it burns if you
don't notice it drop on your skin!!

So ... I'm now looking for an electric stripper :o) .. and yes, we're
still talking about paint!

Dropped into HomeBase on the way home and they only had a single brand
there. Can't remember what it was but I'd never heard of it. It cost £15
and was 1500W. Didn't buy it as it looked a bit crap!

My question is what you get for money - should I pay more for a better one
elsewhere? Is it just a case of any old one will do? If quality matter,
any advice on what to get? I don't want to spend too much as I won't be
doing a huge amount with it. Just occasional refresh work.



a


Buy the cheap one. My cheapie has been abused summat rotten for years and
years and is still going strong. There's nowt in 'em so cost doesn't
correlate with quality.
I'd also add, that nowadays, the old adage about quality tools being pricey
doesn't generally apply. I could scream at the number of times I've come
across people who won't touch the Chinese imports because they have fixation
that a cheap price means an inferior product. (sheep :)
They'll spend hundreds on a DeWalt tool to be used only occasionally and
then snottily condescend upon DIYers who actually do the biz using tools
they know from hard personal experience to be of lasting value.
From an engineering POV, just compare the flimsy mouldings and poor
metalwork of a Bosch router with the overall much higher quality Chinese
imports offered at a quarter of the price.
regards
john

Paint stripping advice?
 

"John Jardine" wrote in message
...
Buy the cheap one. My cheapie has been abused summat rotten for years and
years and is still going strong. There's nowt in 'em so cost doesn't
correlate with quality.
I'd also add, that nowadays, the old adage about quality tools being
pricey
doesn't generally apply. I could scream at the number of times I've come
across people who won't touch the Chinese imports because they have
fixation
that a cheap price means an inferior product. (sheep :)
They'll spend hundreds on a DeWalt tool to be used only occasionally and
then snottily condescend upon DIYers who actually do the biz using tools
they know from hard personal experience to be of lasting value.
From an engineering POV, just compare the flimsy mouldings and poor
metalwork of a Bosch router with the overall much higher quality Chinese
imports offered at a quarter of the price.
regards
john


Sounds good to me. It's really just a hair dryer in a harder case! I think
I'll go for the Fern one from Screwfix though rather than the Homebase one -
at least I recognise the name. Got a cheap belt-sander from them before and
it works really well so far!


a

Paint stripping advice?
 

"al" wrote in message ...
Been using paint stripper today to remove some ancient paint from my garage
frame. Not a pleasant experience - damn messy stuff and it burns if you
don't notice it drop on your skin!!

So ... I'm now looking for an electric stripper :o) .. and yes, we're
still talking about paint!

Dropped into HomeBase on the way home and they only had a single brand
there. Can't remember what it was but I'd never heard of it. It cost £15
and was 1500W. Didn't buy it as it looked a bit crap!

My question is what you get for money - should I pay more for a better one
elsewhere? Is it just a case of any old one will do? If quality matter,
any advice on what to get? I don't want to spend too much as I won't be
doing a huge amount with it. Just occasional refresh work.


If its 'ancient paint' won't it be lead based and therefore unwise to
be taken off with heat ? Stick to stripper and a tough pair of
gloves.

Rob
a

Paint stripping advice?
 

"al" wrote in message ...

Sounds good to me. It's really just a hair dryer in a harder case! I think

I've seen someone use a hairdryer and put their hand over the air
intake to get the air hot enough. It worked alright, but I dont think
it was a very smart idea.

I dont recommend this! The piont is just that it is a higher temp
version of a hairdryer.

Regards, NT

Paint stripping advice?
 

In article ,
N. Thornton wrote:
I've seen someone use a hairdryer and put their hand over the air
intake to get the air hot enough. It worked alright, but I dont think
it was a very smart idea.

It should have a cutout to prevent the air getting too hot. Sounds like it
wasn't working.

--
*A chicken crossing the road is poultry in motion.*

Dave Plowman London SW 12
RIP Acorn