|
The first knackered Potterton PCB of the season.
My Potterton Suprima 30 was refusing to fire up for more than a few
seconds yesterday, so I followed Potterton's Fault Finding flow chart. This got me as far as "are the two yellow wires to the thermister (sic) shorted?", which was a no. The next but one step was "are the two white wires to the temp control shorted?", which was a yes and therefore "replace Electronic Control", by which I assume they mean the PCB. However, as part of checking, I inspected the wiring to the thermistor and carefully pulled it in and out. On reassembling everything, it now seems to be working as normal. Is it possible that it is the thermistor not conducting heat properly rather than the PCB? -- Hugo Nebula 'What you have to ask yourself is, "if no-one on the internet wants a piece of this, just how far from the pack have you strayed?"' |
Sorry - I can't help with your question but an an aside, how do I get hold
of a Fault Finding flowchart for my boiler: a Potterton Netaheat 60e ? The only relevant document I can find is the User's Guide at http://www.potterton.co.uk/literatur...e_30-80_ug.pdf Thanks Paul "Hugo Nebula" abuse@localhost wrote in message ... My Potterton Suprima 30 was refusing to fire up for more than a few seconds yesterday, so I followed Potterton's Fault Finding flow chart. This got me as far as "are the two yellow wires to the thermister (sic) shorted?", which was a no. The next but one step was "are the two white wires to the temp control shorted?", which was a yes and therefore "replace Electronic Control", by which I assume they mean the PCB. However, as part of checking, I inspected the wiring to the thermistor and carefully pulled it in and out. On reassembling everything, it now seems to be working as normal. Is it possible that it is the thermistor not conducting heat properly rather than the PCB? -- Hugo Nebula 'What you have to ask yourself is, "if no-one on the internet wants a piece of this, just how far from the pack have you strayed?"' |
In message , Hugo Nebula
writes My Potterton Suprima 30 was refusing to fire up for more than a few seconds yesterday, so I followed Potterton's Fault Finding flow chart. This got me as far as "are the two yellow wires to the thermister (sic) shorted?", which was a no. The next but one step was "are the two white wires to the temp control shorted?", which was a yes and therefore "replace Electronic Control", by which I assume they mean the PCB. However, as part of checking, I inspected the wiring to the thermistor and carefully pulled it in and out. On reassembling everything, it now seems to be working as normal. Is it possible that it is the thermistor not conducting heat properly rather than the PCB? Unlikely I would have thought Even if it doesn't have heat sink compound around it, being physically held in place, there's bound to be reasonable conduction to it from the immediate area. What's the resistance at room temp and up at operating temperature ? The information contained in this post may not be published in, or used by http://www.diyprojects.info -- geoff |
In article , raden
writes The information contained in this post may not be published in, or used by http://www.diyprojects.info Doesn't seem to have stopped them: http://www.diyprojects.info/bb/ftopic2556.html Who are they, anyway? -- ..sigmonster on vacation |
In message , PHG
writes Sorry - I can't help with your question but an an aside, how do I get hold of a Fault Finding flowchart for my boiler: a Potterton Netaheat 60e ? The only relevant document I can find is the User's Guide at http://www.potterton.co.uk/literatur...e_30-80_ug.pdf Thanks Paul Flowchart? You're joking A) don't top post B) give us the symptoms The information contained in this post may not be published in, or used by http://www.diyprojects.info -- geoff |
In message , Mike Tomlinson
writes In article , raden writes The information contained in this post may not be published in, or used by http://www.diyprojects.info Doesn't seem to have stopped them: http://www.diyprojects.info/bb/ftopic2556.html Who are they, anyway? This disclaimer means that at least there are grounds to stop them Unless anyone has a better disclaimer, I suggest anyone who takes offence to them stealing Uk-diy material, use what I have written above, i.e. The information contained in this post may not be published in, or used by http://www.diyprojects.info then we can complain to their ISP, as this specifically states that they are not allowed to reproduce it -- geoff |
raden wrote:
In message , Mike Tomlinson writes In article , raden writes The information contained in this post may not be published in, or used by http://www.diyprojects.info Doesn't seem to have stopped them: http://www.diyprojects.info/bb/ftopic2556.html Who are they, anyway? This disclaimer means that at least there are grounds to stop them Unless anyone has a better disclaimer, I suggest anyone who takes offence to them stealing Uk-diy material, use what I have written above, i.e. The information contained in this post may not be published in, or used by http://www.diyprojects.info then we can complain to their ISP, as this specifically states that they are not allowed to reproduce it What you need is a disclaimer along the lines of "diyprojects promise to pay me £100 for each post reproduced. Reproduction of this post constitutes acceptance of these terms". Either that or start a thread with a title they wouldn't like and keep replying to it to put it at the top of their forum each time. -- James... www.jameshart.co.uk |
Hugo Nebula wrote: My Potterton Suprima 30 was refusing to fire up for more than a few seconds yesterday, so I followed Potterton's Fault Finding flow chart. This got me as far as "are the two yellow wires to the thermister (sic) shorted?", which was a no. The next but one step was "are the two white wires to the temp control shorted?", which was a yes and therefore "replace Electronic Control", by which I assume they mean the PCB. However, as part of checking, I inspected the wiring to the thermistor and carefully pulled it in and out. On reassembling everything, it now seems to be working as normal. Is it possible that it is the thermistor not conducting heat properly rather than the PCB? When my P S 80 adopteded the 'fire, fail to fault' mode of operating this time last year I remade all the solder joints on the PCB and it has worked fine ever since. Correction; it has worked as well as one can expect from that model ;-) Richard -- Real email address is RJS at BIGFOOT dot COM The information contained in this post may not be published in, or used by http://www.diyprojects.info |
In message , James Hart
writes raden wrote: In message , Mike Tomlinson writes In article , raden writes The information contained in this post may not be published in, or used by http://www.diyprojects.info Doesn't seem to have stopped them: http://www.diyprojects.info/bb/ftopic2556.html Who are they, anyway? This disclaimer means that at least there are grounds to stop them Unless anyone has a better disclaimer, I suggest anyone who takes offence to them stealing Uk-diy material, use what I have written above, i.e. The information contained in this post may not be published in, or used by http://www.diyprojects.info then we can complain to their ISP, as this specifically states that they are not allowed to reproduce it What you need is a disclaimer along the lines of "diyprojects promise to pay me £100 for each post reproduced. Reproduction of this post constitutes acceptance of these terms". Either that or start a thread with a title they wouldn't like and keep replying to it to put it at the top of their forum each time. Err ... no by copying posts which they are specifically told they may not, there is some come back with their ISP and thus they can be kicked -- geoff |
On Sun, 17 Oct 2004 17:56:58 +0000, PHG wrote:
Sorry - I can't help with your question but an an aside, how do I get hold of a Fault Finding flowchart for my boiler: a Potterton Netaheat 60e ? The only relevant document I can find is the User's Guide at http://www.potterton.co.uk/literatur...e_30-80_ug.pdf The Netaheat is not a complex boiler although it was ahead of the game 20 years ago. What's the problem? -- Ed Sirett - Property maintainer and registered gas fitter. The FAQ for uk.diy is at www.diyfaq.org.uk Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html |
raden wrote:
In message , James Hart writes raden wrote: In message , Mike Tomlinson writes In article , raden writes The information contained in this post may not be published in, or used by http://www.diyprojects.info Doesn't seem to have stopped them: http://www.diyprojects.info/bb/ftopic2556.html Who are they, anyway? This disclaimer means that at least there are grounds to stop them Unless anyone has a better disclaimer, I suggest anyone who takes offence to them stealing Uk-diy material, use what I have written above, i.e. The information contained in this post may not be published in, or used by http://www.diyprojects.info then we can complain to their ISP, as this specifically states that they are not allowed to reproduce it What you need is a disclaimer along the lines of "diyprojects promise to pay me £100 for each post reproduced. Reproduction of this post constitutes acceptance of these terms". Either that or start a thread with a title they wouldn't like and keep replying to it to put it at the top of their forum each time. Err ... no by copying posts which they are specifically told they may not, there is some come back with their ISP and thus they can be kicked in a similar theme, who gave google to reproduce posts, and place contextual adverts? it would be interesting how much advertising money google get from people searching through this group... prehaps google could provide some sort of community web space for hosting faq's or similar to compensate? -- Peter D The information contained in this post may not be published in, or used by http://www.diyprojects.info |
C) Don't post rubbish or it'll end up on http://www.diyprojects.info forever
:) "raden" wrote in message ... In message , PHG writes Sorry - I can't help with your question but an an aside, how do I get hold of a Fault Finding flowchart for my boiler: a Potterton Netaheat 60e ? The only relevant document I can find is the User's Guide at http://www.potterton.co.uk/literatur...ile_30-80_ug.p df Thanks Paul Flowchart? You're joking A) don't top post B) give us the symptoms The information contained in this post may not be published in, or used by http://www.diyprojects.info -- geoff |
| All times are GMT +1. The time now is 04:00 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter