Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
I've had a Redring Zeta Digital 8.0 shower for a couple of years but
recently it's started cutting out. It runs for about a minute and then stops (as if it's overheated), even if I have it at a very low temperature. I thought it might be the thermal cut off device but the problem is still there after I'd replaced it. Any ideas? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Shower Pump | UK diy | |||
p*ss poor flow rate to newly installed shower | UK diy | |||
Shower screen grumble... | UK diy | |||
shower drain for tiled shower floor | UK diy | |||
Leaky AquaLisa shower | UK diy |