Hi,
I have recently fitted an external wooden door frame that had a draft strip
imbedded in it. This was some sort of synthetic material in a routed groove
all around the perimeter. This compresses when the door closes. Seems to
work well and means that the door is still easy to close. (I have had
problem with stick-on draft strips and badly closing doors in the past...)

It strikes me that I may be able to retro-fit this type of draft-excluder to
the other exterior door to the house. I was thinking of removing the doors
from the hinges, routing a groove in the doors (not the frame) and gluing on
a draft strip. (Rather the same way as an intumescent strip would be fixed.)

Two questions:

1. Where could I buy a strip of draft excluder?
2. Is this a good idea (i.e. is there a better solution, any problems.)

TIA Colin

I must learn to spell draught.
I must learn to spell draught.
I must learn to spell draught.
I must learn to spell draught.
I must learn to spell draught.
I must learn to spell draught.
I must learn to spell draught.
I must learn to spell draught.
I must learn to spell draught.
I must learn to spell draught.

In article , Colin
writes
Hi,
I have recently fitted an external wooden door frame that had a draft strip
imbedded in it. This was some sort of synthetic material in a routed groove
all around the perimeter. This compresses when the door closes. Seems to
work well and means that the door is still easy to close. (I have had
problem with stick-on draft strips and badly closing doors in the past...)

It strikes me that I may be able to retro-fit this type of draft-excluder to
the other exterior door to the house. I was thinking of removing the doors
from the hinges, routing a groove in the doors (not the frame) and gluing on
a draft strip. (Rather the same way as an intumescent strip would be fixed.)

Two questions:

1. Where could I buy a strip of draft excluder?
2. Is this a good idea (i.e. is there a better solution, any problems.)

You can buy the strip at Wickes. However I don't think it would work on
the edges of the doors if that's what you are suggesting, it would just
pull out of the groove.
--
Tim Mitchell

You can buy the strip at Wickes. However I don't think it would work on
the edges of the doors if that's what you are suggesting, it would just
pull out of the groove.

I could route a groove in the frame but I am not sure how to do the bits
near the ground and the corners.

I guess the reason behind a strip pulling out of the door and not pulling
out of the frame is some sort of 'physics'-type reason. What if I were to
grip-fill the strip in?

Colin

"Colin" wrote in message
...

You can buy the strip at Wickes. However I don't think it would work on
the edges of the doors if that's what you are suggesting, it would just
pull out of the groove.

I could route a groove in the frame but I am not sure how to do the bits
near the ground and the corners.

I guess the reason behind a strip pulling out of the door and not pulling
out of the frame is some sort of 'physics'-type reason. What if I were to
grip-fill the strip in?

Colin

Axminster do a router bit and matching doorseal: www.axminster.co.uk search
for A33412TC.
This is for the frame but looking at it, it could also go in the door.
Not cheap mind


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.760 / Virus Database: 509 - Release Date: 10/09/04

"Colin" wrote
| I could route a groove in the frame but I am not sure how to do
| the bits near the ground and the corners.

Chisel?

Owain

Chisel?

What's one of those then ;-)

"Colin" wrote
| Chisel?
| What's one of those then ;-)

A special sort of screwdriver used for opening paint tins, but in days of
old when men were bold and routers weren't invented, men cut their grooves
with sharpened tools and went away contented.

Owain

Colin wrote:
1. Where could I buy a strip of draft excluder?

Mighton on www.mighton.co.uk (I think) sell a strip for sash
windows that might do the job;

2. Is this a good idea (i.e. is there a better solution, any
problems.)

You used to be able to get something called "Atomic Strip" - I
don't know whether you still can.


J.B.

Colin wrote:

You can buy the strip at Wickes. However I don't think it would work on
the edges of the doors if that's what you are suggesting, it would just
pull out of the groove.

I could route a groove in the frame but I am not sure how to do the bits
near the ground and the corners.

A dremel can be very handy for this sort of stuff.
Both as a very light-duty router, for tight spaces, and for getting rid
of most of the wood in that corner, before moving to the chisel.
Of course you can remove the door and hang it upside down to do the
groove at the bottom.

Ian Stirling wrote in message ...
Colin wrote:

You can buy the strip at Wickes. However I don't think it would work on
the edges of the doors if that's what you are suggesting, it would just
pull out of the groove.

I could route a groove in the frame but I am not sure how to do the bits
near the ground and the corners.

A dremel can be very handy for this sort of stuff.
Both as a very light-duty router,

interesting: what kind of bits would you put in a 3.2mm collet?

Regards, NT

N. Thornton wrote:
Ian Stirling wrote in message ...
Colin wrote:

You can buy the strip at Wickes. However I don't think it would work on
the edges of the doors if that's what you are suggesting, it would just
pull out of the groove.

I could route a groove in the frame but I am not sure how to do the bits
near the ground and the corners.

A dremel can be very handy for this sort of stuff.
Both as a very light-duty router,

interesting: what kind of bits would you put in a 3.2mm collet?

The "router" bits sold for use with it.
Of course it does not compare with a proper router, but can be handy for
tidying up.
Plus, of course, you can use things like 2mm "ball" bits freehand to clean
up the edges of things.

There are even solid carbide 3.2mm bits available, which are nice.