Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Internal wall box lintel
I wish to remove a wall between the kitchen and dining-room. This wall is
3.6m wide and 2.6m high, is a single brick thick, has a door to one side and supports a single story wall above. I want to make an opening about 3.3m wide and 2.3m high. There is only about 100mm of wall at the side of the door. How can I calculate the minimum end bearing length for an Expamet box lintel? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Deck Set on Retaining Wall | Home Repair | |||
"Damp" internal wall - initial measurements made. Any ideas? | UK diy | |||
LINTEL | UK diy | |||
Wall falling down? | UK diy |