Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
diverter valve again
We have just had the diverter valve fixed (new diaphragm), but we still
need to turn on the hot tap fully to get it to operate. Are there any adjustments so set the operating pressure of the valve? (It's on a Worcester Bosch 28CDi) -- Richard Markham |
#2
|
|||
|
|||
diverter valve again
On Wed, 10 Mar 2004 00:48:18 +0000, Richard Markham wrote:
We have just had the diverter valve fixed (new diaphragm), but we still need to turn on the hot tap fully to get it to operate. Are there any adjustments so set the operating pressure of the valve? (It's on a Worcester Bosch 28CDi) The diverter valve is not the same component as the water flow detector although both may contain a diaphragm. -- Ed Sirett - Property maintainer and registered gas fitter. The FAQ for uk.diy is at www.diyfaq.org.uk Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Diverter valve diaphragm damage | UK diy | |||
Vaillant diverter valve | UK diy | |||
CH System - what is this gate valve for? | UK diy | |||
Boiler diverter valve | UK diy | |||
NO HW NO CH, Honeywell diverter valve | UK diy |