DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Hot Glue Guns (https://www.diybanter.com/uk-diy/681065-hot-glue-guns.html)

Cursitor Doom[_6_] October 18th 20 12:39 PM

Hot Glue Guns
 
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD

alan_m October 18th 20 12:44 PM

Hot Glue Guns
 
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


no




--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk

Cursitor Doom[_6_] October 18th 20 12:47 PM

Hot Glue Guns
 
On Sun, 18 Oct 2020 12:44:22 +0100, alan_m
wrote:

On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


no


So they're just a gimmick then? Thought so.

Dave Plowman (News) October 18th 20 12:50 PM

Hot Glue Guns
 
In article ,
alan_m wrote:
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


no


They are handy in that the glue doesn't go off with storage. Unlike every
other type I have, after part used.

--
*WHY IS IT CALLED TOURIST SEASON IF WE CAN'T SHOOT AT THEM?

Dave Plowman London SW
To e-mail, change noise into sound.

Richard[_10_] October 18th 20 01:10 PM

Hot Glue Guns
 
On 18/10/2020 12:50, Dave Plowman (News) wrote:
In article ,
alan_m wrote:
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


no


They are handy in that the glue doesn't go off with storage. Unlike every
other type I have, after part used.


+1
Also gives almost instant bond.

Martin Brown[_3_] October 18th 20 01:33 PM

Hot Glue Guns
 
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


Rapid high tack strong waterproof bond. You can get that with other
glues too but it is convenient, fast and the glue sticks don't go off
with age (well they might on a geological timescale).

--
Regards,
Martin Brown

Tim Lamb[_2_] October 18th 20 02:12 PM

Hot Glue Guns
 
In message , "Dave Plowman (News)"
writes
In article ,
alan_m wrote:
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


no


They are handy in that the glue doesn't go off with storage. Unlike every
other type I have, after part used.


And annoying that the glue sticks intended for different purposes appear
identical, easily mixed up and require you to remember the last job!
Other than that, very useful.


--
Tim Lamb

williamwright October 18th 20 03:57 PM

Hot Glue Guns
 
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD

Never let a child use one. The burns can be awful.

Bill

williamwright October 18th 20 03:59 PM

Hot Glue Guns
 
On 18/10/2020 15:57, williamwright wrote:
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD

Never let a child use one. The burns can be awful.

Bill

Or a child-like adult. It still hertz.

Bill

Harry Bloomfield, Esq.[_2_] October 18th 20 05:37 PM

Hot Glue Guns
 
Dave Plowman (News) explained on 18/10/2020 :
They are handy in that the glue doesn't go off with storage. Unlike every
other type I have, after part used.


If what you are glueing will not be damaged by heat, you can reheat
them to adjust after it has cooled/set up.

The Natural Philosopher[_2_] October 18th 20 06:06 PM

Hot Glue Guns
 
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD

In my model aircraft hobby they are excellent for gluing servos and
other electronic bits in - they dont come off but can be levered off
with some force. They are excellent for gluing crashed foam aircraft
back together - hot glue is stringer than foam

Not a bad glue for large areas of plastic either.

The glue is fast and gap filling and tacks to almost anything but its
not strong.


--
€œA leader is best When people barely know he exists. Of a good leader,
who talks little,When his work is done, his aim fulfilled,They will say,
€œWe did this ourselves.€

ۥ Lao Tzu, Tao Te Ching

misterroy October 18th 20 06:59 PM

Hot Glue Guns
 
On Sunday, October 18, 2020 at 6:06:05 PM UTC+1, The Natural Philosopher wrote:
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD

In my model aircraft hobby they are excellent for gluing servos and
other electronic bits in - they dont come off but can be levered off
with some force. They are excellent for gluing crashed foam aircraft
back together - hot glue is stringer than foam

Not a bad glue for large areas of plastic either.

The glue is fast and gap filling and tacks to almost anything but its
not strong.


--
€œA leader is best When people barely know he exists. Of a good leader,
who talks little,When his work is done, his aim fulfilled,They will say,
€œWe did this ourselves.€

ۥ Lao Tzu, Tao Te Ching

After you have bought an angle grinder, the glue gun is the next purchase.
1001 uses. Today I used my fancy, new to me, industrial glue gun to make a fishbox watertight.

Roger Mills[_2_] October 18th 20 08:32 PM

Hot Glue Guns
 
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....



The main advantage from my point of view is that the glue sets and makes
a firm bond as soon as it cools a bit - so you only have to hold the
components in place for a few seconds.
--
Cheers,
Roger

Bob Eager[_7_] October 18th 20 10:50 PM

Hot Glue Guns
 
On Sun, 18 Oct 2020 20:32:12 +0100, Roger Mills wrote:

On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....



The main advantage from my point of view is that the glue sets and makes
a firm bond as soon as it cools a bit - so you only have to hold the
components in place for a few seconds.


While the excess glue cools on your skin...

--
My posts are my copyright and if @diy_forums or Home Owners' Hub
wish to copy them they can pay me £1 a message.
Use the BIG mirror service in the UK: http://www.mirrorservice.org
*lightning surge protection* - a w_tom conductor

Jimk October 19th 20 01:21 AM

Hot Glue Guns
 
Cursitor Doom Wrote in message:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD


Burn your fingers
--
Jimk


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

Jimk October 19th 20 01:21 AM

Hot Glue Guns
 
williamwright Wrote in message:
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD

Never let a child use one. The burns can be awful.

Bill


They use them at the local junior!
--
Jimk


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

John Rumm October 19th 20 01:41 AM

Hot Glue Guns
 
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


Set in 20 seconds, and form a strong bond that can be separated
relatively easily if required[1].

So when gluing paper / card etc or fabric to timber, you can glue and
move on very quickly.

Also massively useful in a workshop I find, for things like fixing
drawer fronts - a dab of hot melt at each end - push it into the right
place and hold for a few secs, you can now remove/open the draw and
drill / screw though without risk of the position slipping. Or just
fixing a template to something before marking or routing round it.
Same when fixing hinges on boxes - a dab of glue to allow you to
position, but then open the hinge while it stays in place so you can
mark / screw etc.

(hot paint scraper slid between parts, or freezer spay and a sharp tap)



--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

John Rumm October 19th 20 01:46 AM

Hot Glue Guns
 
On 18/10/2020 18:06, The Natural Philosopher wrote:
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD

In my model aircraft hobby they are excellent for gluing servos and
other electronic bits in - they dont come off but can be levered off
with some force. They are excellent for gluing crashed foam aircraft
back together - hot glue is stringer than foam

Not a bad glue for large areas of plastic either.

The glue is fast and gap filling and tacks to almost anything but its
not strong.


Yup good for bodging stuff together when there are gaps (and perhaps
bits missing) - you can use the much like you might use a welder - the
glue behaves as both glue and filler material.




--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

newshound October 19th 20 02:34 PM

Hot Glue Guns
 
On 19/10/2020 01:46, John Rumm wrote:
On 18/10/2020 18:06, The Natural Philosopher wrote:
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD

In my model aircraft hobby they are excellent for gluing servos and
other electronic bits in - they dont come off but can be levered off
with some force. They are excellent for gluing crashed foam aircraft
back together - hot glue is stringer than foam

Not a bad glue for large areas of plastic either.

The glue is fast and gap filling and tacks to almost anything but its
not strong.


Yup good for bodging stuff together when there are gaps (and perhaps
bits missing) - you can use the much like you might use a welder - the
glue behaves as both glue and filler material.




Also you can "pot" electrical connections, e.g. if you have floppy mains
wires. You can do this to "make safe" cracked bits of rigid plastic that
are holding conductors in things like switches. Also for exclusion of
moisture. You need some undamaged surrounding material to provide the
containment and overall strength.

I think the last thing I did this on was a slow cooker where some of the
the switch lugs had cracked so that it wanted to come out of the main body.

whisky-dave[_2_] October 19th 20 02:51 PM

Hot Glue Guns
 
On Monday, 19 October 2020 at 14:34:46 UTC+1, newshound wrote:
On 19/10/2020 01:46, John Rumm wrote:
On 18/10/2020 18:06, The Natural Philosopher wrote:
On 18/10/2020 12:39, Cursitor Doom wrote:
Gentlemen,

What can these things do that regular gluing techniques can't?
Just curious....


CD

In my model aircraft hobby they are excellent for gluing servos and
other electronic bits in - they dont come off but can be levered off
with some force. They are excellent for gluing crashed foam aircraft
back together - hot glue is stringer than foam

Not a bad glue for large areas of plastic either.

The glue is fast and gap filling and tacks to almost anything but its
not strong.


Yup good for bodging stuff together when there are gaps (and perhaps
bits missing) - you can use the much like you might use a welder - the
glue behaves as both glue and filler material.




Also you can "pot" electrical connections, e.g. if you have floppy mains
wires. You can do this to "make safe" cracked bits of rigid plastic that
are holding conductors in things like switches. Also for exclusion of
moisture. You need some undamaged surrounding material to provide the
containment and overall strength.

I think the last thing I did this on was a slow cooker where some of the
the switch lugs had cracked so that it wanted to come out of the main body.


I had a couple with glitter in them, so I assume you could also add colour to your glue.
So could be used as a filler.

https://www.amazon.co.uk/Am-Tech-S18...dp/B07L5C141Z/

Students seem to like to use it or superglue as it's quick setting, you should hear the complaints if they have to wait 10mins for a glue to set.




All times are GMT +1. The time now is 07:01 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter