|
DIY fire alarms.
Can someone explain the process for the DIY part below..
..........."Any costs will be the responsibility of home owners and landlords. The cost of the alarms will vary according to what you currently have in place and the alarms you choose to install We estimate that the cost for an average three bedroom house which requires three smoke alarms, one heat alarm and one carbon monoxide detector will be around £220. This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm"............. |
DIY fire alarms.
ss wrote:
Can someone explain the process for the DIY part below.. .........."Any costs will be the responsibility of home owners and landlords. The cost of the alarms will vary according to what you currently have in place and the alarms you choose to install We estimate that the cost for an average three bedroom house which requires three smoke alarms, one heat alarm and one carbon monoxide detector will be around £220. This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm"............. Depends what kind of alarms they're talking about - basic alarms are £10-20 each, fancier ones with lifetime batteries and radio interlinking could be more in the £40-60 bracket. Installation is basically put a couple of screws into a joist, installing the battery (if any) and holding down a button to pair them (if linked). Theo |
DIY fire alarms.
On Tuesday, 13 October 2020 21:15:11 UTC+1, ss wrote:
Can someone explain the process for the DIY part below.. This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm"............. 2 moke alarms and a heat alarm £90. https://www.safelincs.co.uk/ultrafir...ssentials-kit/ CO detector £16 https://www.safelincs.co.uk/slim-lin...rm-5dco-kidde/ battery powered, stick them to the wall/ceiling. The Scottish Govt tried to "sell" me similar things for free, made by Fire Angel (which get really bad reviews in Which for a large number being faulty) but as I already have 5 smokes, 1 heat, 1 CO, all AICO, all hardwired and interlinked with a locator switch, I declined. Owain |
DIY fire alarms.
On 13/10/2020 21:56, ss wrote:
On 13/10/2020 21:53, wrote: On Tuesday, 13 October 2020 21:15:11 UTC+1, ssÂ* wrote: Can someone explain the process for the DIY part below.. This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm"............. 2 moke alarms and a heat alarm £90. https://www.safelincs.co.uk/ultrafir...ssentials-kit/ CO detector £16 https://www.safelincs.co.uk/slim-lin...rm-5dco-kidde/ battery powered, stick them to the wall/ceiling. The Scottish Govt tried to "sell" me similar things for free, made by Fire Angel (which get really bad reviews in Which for a large number being faulty) but as I already have 5 smokes, 1 heat, 1 CO, all AICO, all hardwired and interlinked with a locator switch, I declined. Owain I should have mentioned it is the new scottish legislation that requires all houses to be hard wired with smoke /fire alarms by Feb 2021. I have 4 battery in my house but I dont understand this part...... ..."This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm" It seems the law applies to both private and rented accommodation. https://www.gov.scot/publications/fi...cottish-homes/ but it does not say they have to be hard wired. -- Adam |
DIY fire alarms.
On 13/10/2020 21:53, wrote:
On Tuesday, 13 October 2020 21:15:11 UTC+1, ss wrote: Can someone explain the process for the DIY part below.. This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm"............. 2 moke alarms and a heat alarm £90. https://www.safelincs.co.uk/ultrafir...ssentials-kit/ CO detector £16 https://www.safelincs.co.uk/slim-lin...rm-5dco-kidde/ battery powered, stick them to the wall/ceiling. The Scottish Govt tried to "sell" me similar things for free, made by Fire Angel (which get really bad reviews in Which for a large number being faulty) but as I already have 5 smokes, 1 heat, 1 CO, all AICO, all hardwired and interlinked with a locator switch, I declined. I believe it was AICO CO detectors that failed the Which tests (on a sample of 3) -- Adam |
DIY fire alarms.
ss Wrote in message:
Can someone explain the process for the DIY part below.. .........."Any costs will be the responsibility of home owners and landlords. The cost of the alarms will vary according to what you currently have in place and the alarms you choose to install We estimate that the cost for an average three bedroom house which requires three smoke alarms, one heat alarm and one carbon monoxide detector will be around £220. This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm"............. It would help if you included some context, but it's this: https://www.gov.scot/publications/fi...larms-in-scott ish-homes/ The DIY process as you put it seems to be that you go to B&Q, buy the requisite number of interlinked alarms, and screw them to your ceiling. -- %Profound_observation% ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
DIY fire alarms.
On Tuesday, 13 October 2020 22:19:23 UTC+1, ARW wrote:
I believe it was AICO CO detectors that failed the Which tests (on a sample of 3) That was the 208 at £21. I got the EI261ENRC which was a bit more expensive. Although it's discontinued now and its replacement isn't hardwire interlinkable. Anyway, the presence of a box on the wall keeps surveyors happy. I don't expect any will have a CO tester along with the damp meter. Owain |
DIY fire alarms.
Why would I need three and why a heat alarm and a co2 alarm?
I guess it could be so if you had a family and gas central heating or gas anything. Luckily I do not. I noticed that in a flat where the fire service had installed free smoke alarms they were held to the ceiling and walls simply by self adhesive pads. I'd have thought that rather insecure. However I copied this idea, and its certainly stuck very weell. Brian -- -- This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please Note this Signature is meaningless.! "ss" wrote in message ... Can someone explain the process for the DIY part below.. .........."Any costs will be the responsibility of home owners and landlords. The cost of the alarms will vary according to what you currently have in place and the alarms you choose to install We estimate that the cost for an average three bedroom house which requires three smoke alarms, one heat alarm and one carbon monoxide detector will be around £220. This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm"............. |
DIY fire alarms.
On 13/10/2020 21:53, wrote:
On Tuesday, 13 October 2020 21:15:11 UTC+1, ss wrote: Can someone explain the process for the DIY part below.. This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm"............. 2 moke alarms and a heat alarm £90. https://www.safelincs.co.uk/ultrafir...ssentials-kit/ CO detector £16 https://www.safelincs.co.uk/slim-lin...rm-5dco-kidde/ battery powered, stick them to the wall/ceiling. The Scottish Govt tried to "sell" me similar things for free, made by Fire Angel (which get really bad reviews in Which for a large number being faulty) but as I already have 5 smokes, 1 heat, 1 CO, all AICO, all hardwired and interlinked with a locator switch, I declined. Unless things have changed very recently due to Covid restrictions the local fire brigade go around pensioners houses installing fire alarms for free when they have nothing better to do. https://www.thesun.co.uk/money/98979...-fire-service/ It is much more cost effective than having to put out a domestic fire. Typically (for historical reasons) one over the TV in the living room and one on the on upstairs landing. TV's haven't really caught fire much since the valve era (when it was all too common). -- Regards, Martin Brown |
DIY fire alarms.
Brian Gaff wrote:
Why would I need [...] a co2 alarm? Don't breathe near it ... |
DIY fire alarms.
On 13/10/2020 21:32, Theo wrote:
Installation is basically put a couple of screws into a joist, Plaster ceiling fixing is OK. Undersized hole (6mm or make it with a 0.25" screwdriver) brown plug, tap the plug in, 1.25 or 1.5" No 6 woodscrew. Bill |
DIY fire alarms.
|
DIY fire alarms.
"ARW" wrote in message ... On 13/10/2020 21:56, ss wrote: On 13/10/2020 21:53, wrote: On Tuesday, 13 October 2020 21:15:11 UTC+1, ss wrote: Can someone explain the process for the DIY part below.. This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm"............. 2 moke alarms and a heat alarm £90. https://www.safelincs.co.uk/ultrafir...ssentials-kit/ CO detector £16 https://www.safelincs.co.uk/slim-lin...rm-5dco-kidde/ battery powered, stick them to the wall/ceiling. The Scottish Govt tried to "sell" me similar things for free, made by Fire Angel (which get really bad reviews in Which for a large number being faulty) but as I already have 5 smokes, 1 heat, 1 CO, all AICO, all hardwired and interlinked with a locator switch, I declined. Owain I should have mentioned it is the new scottish legislation that requires all houses to be hard wired with smoke /fire alarms by Feb 2021. I have 4 battery in my house but I dont understand this part...... ..."This is based on using the type of alarms that you can install by yourself without the need for an electrician for installing a hard-wired alarm" It seems the law applies to both private and rented accommodation. https://www.gov.scot/publications/fi...cottish-homes/ but it does not say they have to be hard wired. It specifically says that they don't have to be "You can install tamper proof long-life lithium battery alarms or mains-wired alarms." -- Adam |
DIY fire alarms.
"Brian Gaff (Sofa)" wrote in message ... Why would I need three main living area, upstairs landing and downstairs landing, as required by the regs, would be a typical installation. and why a heat alarm because the regs require it, if you have a kitchen. And who doesn't? and a co2 alarm? required if you have gas heating or an open fire. I guess it could be so if you had a family size of house is relevant factor, not size of family and gas central heating or gas anything. Luckily I do not. I noticed that in a flat where the fire service had installed free smoke alarms they were held to the ceiling and walls simply by self adhesive pads. I'd have thought that rather insecure. However I copied this idea, and its certainly stuck very weell. That's' good to know I have concrete ceilings which are a bugger to drill into (not that I'm subject to the regs, but changes could be made to English ones - I'm frequently being nagged into having a CO detector - one day it will become mandatory) |
DIY fire alarms.
On 14/10/2020 08:15, Brian Gaff (Sofa) wrote:
Why would I need three and why a heat alarm and a co2 alarm? I guess it could be so if you had a family and gas central heating or gas anything. Luckily I do not. I noticed that in a flat where the fire service had installed free smoke alarms they were held to the ceiling and walls simply by self adhesive pads. I'd have thought that rather insecure. However I copied this idea, and its certainly stuck very weell. Brian In my case, I have 4 CO alarms, 2 heat detectors and 10 Smoke detectors all mains powered and interlinked. The two heat detectors are in kitchen and loft. The 4 CO detectors are above gas boiler in kitchen, near to woodburner in lounge and in the bedroom above and loft above that (proximity to chimney stack) The smoe dets are in lounge, dining room, hall, 5 bedrooms, landing and garage. Its also all connected to the house alarm system as a 24 hour zone. The house alarm cann remotely signal to me if I am out of the house. |
DIY fire alarms.
On Wed, 14 Oct 2020 08:15:27 +0100, Brian Gaff \(Sofa\) wrote:
Why would I need three and why a heat alarm ... Less chance of false alarms with heat alarms in/near kitchens. ... and a co2 alarm? CO ... In the room with a gas boiler in case the professional servicing it fups up the combustion settings and damages the room seal allowing CO into the room. In the room with a woodburner/stove, damaged seals allowing CO into the room. A stove/wood burner needs a decent free air supply, without which the draw for the chimeny might not maintain a negative pressure in the stove. Wind direction dependant... -- Cheers Dave. |
DIY fire alarms.
On Wed, 14 Oct 2020 09:10:14 +0100, tim... wrote:
and a co2 alarm? required if you have gas heating or an open fire. Open fire? Not a stove/woodburner? -- Cheers Dave. |
DIY fire alarms.
On Wed, 14 Oct 2020 09:21:55 +0100, No Name wrote:
In my case, I have 4 CO alarms, 2 heat detectors and 10 Smoke detectors all mains powered and interlinked. 16 devices, ouch at say 7 W each 112 W. 980+ kWHr/year or best part £150/year. 5 W each is still £100/year... Seems a bit OTT to have a smoke detector in each bedroom unless you're smokers and smoke in bed... We have boiler room, kitchen, snug (wood burner), 2 on the landing (split level with a dividing beam). They are there just to wakes us up and get us out in the event of fire. By the time the fire brigade turn up, single pump, retained fire fighters, it'll be over 10 minutes from the call, house likely to be "well alight". Only water available is the water the pump carries. No hydrant within miles, though there is a water main Wash Out a couple of hundred yards away but I doubt that they have enough suction hose to reach that. Next nearest pumps will take 30 to 40 minutes to arrive. Houses literally burn down around here... -- Cheers Dave. |
DIY fire alarms.
On Wed, 14 Oct 2020 08:36:52 +0100, Martin Brown
Unless things have changed very recently due to Covid restrictions the local fire brigade go around pensioners houses installing fire alarms for free when they have nothing better to do. https://www.thesun.co.uk/money/98979...-fire-service/ It is much more cost effective than having to put out a domestic fire. Typically (for historical reasons) one over the TV in the living room and one on the on upstairs landing. TV's haven't really caught fire much since the valve era (when it was all too common). and around here they have been supplying and fitting the Fire Angle ones, whose 10 years batteries seem to fail after 1-2 years (I've had 4 like that). Can anyone recommend an alternative? |
DIY fire alarms.
On 14/10/2020 11:37, Davidm wrote:
Can anyone recommend an alternative? Almost any of the ones that take a PP9 battery are OK - just remember to test them occasionally especially as winter approaches or you will be woken up at 4 in the morning by the thing going "beep" every few minutes due to the drop in battery voltage at the coldest time of night. Much more depends on putting it in the right place to detect any smoke and not see burnt toast, or roast Sunday lunch than on the alarm. -- Regards, Martin Brown |
DIY fire alarms.
"Dave Liquorice" wrote in message idual.net... On Wed, 14 Oct 2020 09:10:14 +0100, tim... wrote: and a co2 alarm? required if you have gas heating or an open fire. Open fire? Not a stove/woodburner? the narrative was unclear on that point |
DIY fire alarms.
On 14/10/2020 08:15, Brian Gaff (Sofa) wrote:
Why would I need three and why a heat alarm and a co2 alarm? Because you haven't read the Scottish legal requirements for fire/heat/CO alarms in houses. |
DIY fire alarms.
On 14/10/2020 20:35, mm0fmf wrote:
On 14/10/2020 08:15, Brian Gaff (Sofa) wrote: Why would I need three and why a heat alarm and a co2 alarm? Because you haven't read the Scottish legal requirements for fire/heat/CO alarms in houses. new houses |
DIY fire alarms.
"Jim GM4DHJ ..." wrote in message ... On 14/10/2020 20:35, mm0fmf wrote: On 14/10/2020 08:15, Brian Gaff (Sofa) wrote: Why would I need three and why a heat alarm and a co2 alarm? Because you haven't read the Scottish legal requirements for fire/heat/CO alarms in houses. new houses all houses To be enforced by making them unsellable/rentable if you haven't don't it. So pretty useless if it's your "forever" home |
DIY fire alarms.
On 14/10/2020 09:10, tim... wrote:
(not that I'm subject to the regs, but changes could be made to English ones - I'm frequently being nagged into having a CO detector - one day it will become mandatory) But after being made compulsory how long afterwards will most of them cease to work due to dead batteries, not being replaced at end of life, chocked full of dust or simply removed because of too many false alarms. Will we all be required to pay for an annual check to certify that the detectors are still in place and working. Why would you need a CO2 detector if ALL of your heating and cooking needs are going to come from wind and solar? -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
DIY fire alarms.
On 14/10/2020 10:12, Dave Liquorice wrote:
On Wed, 14 Oct 2020 09:21:55 +0100, No Name wrote: In my case, I have 4 CO alarms, 2 heat detectors and 10 Smoke detectors all mains powered and interlinked. 16 devices, ouch at say 7 W each 112 W. 980+ kWHr/year or best part £150/year. 5 W each is still £100/year... Why 7W per device? A battery powered smoke or CO2 detector alarm can run for over a year on a single PP3 battery. BUT Possibly only a few hours if the alarm was continually sounding. Is the specification for you mains powered units a maximum of 7W (when in alarm mode) and much much less in standby detect mode. -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
DIY fire alarms.
"alan_m" wrote in message ... On 14/10/2020 09:10, tim... wrote: (not that I'm subject to the regs, but changes could be made to English ones - I'm frequently being nagged into having a CO detector - one day it will become mandatory) But after being made compulsory how long afterwards will most of them cease to work due to dead batteries, not being replaced at end of life, chocked full of dust or simply removed because of too many false alarms. which is why it's stupid Will we all be required to pay for an annual check to certify that the detectors are still in place and working. Checks will simply be done as part of new occupancies, either tenants or owner Makes sense in the letting sector where churn can be high, but not for OOs where it can be much lower |
DIY fire alarms.
In article ,
alan_m wrote: On 14/10/2020 10:12, Dave Liquorice wrote: On Wed, 14 Oct 2020 09:21:55 +0100, No Name wrote: In my case, I have 4 CO alarms, 2 heat detectors and 10 Smoke detectors all mains powered and interlinked. 16 devices, ouch at say 7 W each 112 W. 980+ kWHr/year or best part £150/year. 5 W each is still £100/year... Why 7W per device? A battery powered smoke or CO2 detector alarm can run for over a year on a single PP3 battery. BUT Possibly only a few hours if the alarm was continually sounding. Is the specification for you mains powered units a maximum of 7W (when in alarm mode) and much much less in standby detect mode. these are not CO2 detectors, if they were they'd be buzzing all day long. They are Carbon MONOXIDE detectors. You might, if there was a power cut, be stupid enough to bring a petrol generator indoors. -- from KT24 in Surrey, England "I'd rather die of exhaustion than die of boredom" Thomas Carlyle |
| All times are GMT +1. The time now is 02:22 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter