Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Jablite
Need to put some Jabfllor70 down in my floor before concreting. Its
100mm thick and I need to cut some strips out of one board to go round the edge. Any tips on cutting this stuff? Or is it just a case of a sharp kitchen knife and a grinding wheel !! Cheers |
#2
|
|||
|
|||
Jablite
Any tips on cutting this stuff? Or is it just a case of a sharp
kitchen knife and a grinding wheel !! Old or B&Q value handsaw. Christian. |
#3
|
|||
|
|||
Jablite
Any tips on cutting this stuff? Or is it just a case of a sharp
kitchen knife and a grinding wheel !! Old or B&Q value handsaw. From the horse's mouth: Cutting EPS can be easily cut using a sharp craft knife or a fine-toothed saw. Christian. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Jablite sheet - stiffness | UK diy |