Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
I have a area of rot on a window frame (image attached).
I hacve scraped it out and will let it dry for a few days then intend to use wood rot hardener then fill with 2-part epoxy stuff. Is this the best way to go or should I cut a section out and replace the wood. Damaged area is approx 20cms long and approx 2cms at widest. Other question that piece of the sill does that go through to the interior of the frame? Not sure how these things are constructed. https://imgur.com/BXRr3bd |
#2
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
I would say you will get away with filling that after applying hardener. As for the sill yes you can get a sill that is moulded as one for the bottom member of the frame and a separate type known as a loose sill and yes it will extend to the inside. At a guess because there seems some cracking of the paint where the sill meets the frame I would say yours is a loose sill but you can always have a poke around to verify that.
Richard |
#3
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
On 09/05/2020 12:55, Tricky Dicky wrote:
I would say you will get away with filling that after applying hardener. As for the sill yes you can get a sill that is moulded as one for the bottom member of the frame and a separate type known as a loose sill and yes it will extend to the inside. At a guess because there seems some cracking of the paint where the sill meets the frame I would say yours is a loose sill but you can always have a poke around to verify that. Richard The cracking of paint is where there is 3 layers. The bottom layer is a stone sill. Then there is the wooden part where it is rotted. And between the 2 is like a putty type substance. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
On 09/05/2020 11:56, ss wrote:
I have a area of rot on a window frame (image attached). I hacve scraped it out and will let it dry for a few days then intend to use wood rot hardener then fill with 2-part epoxy stuff. Is this the best way to go or should I cut a section out and replace the wood. Damaged area is approx 20cms long and approx 2cms at widest. Other question that piece of the sill does that go through to the interior of the frame? Not sure how these things are constructed. https://imgur.com/BXRr3bd No you are OK. scrape it out to good wood, fill with car body filler and paint -- Gun Control: The law that ensures that only criminals have guns. |
#5
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
On 09/05/2020 13:20, The Natural Philosopher wrote:
On 09/05/2020 11:56, ss wrote: I have a area of rot on a window frame (image attached). I hacve scraped it out and will let it dry for a few days then intend to use wood rot hardener then fill with 2-part epoxy stuff. Is this the best way to go or should I cut a section out and replace the wood. Damaged area is approx 20cms long and approx 2cms at widest. Other question that piece of the sill does that go through to the interior of the frame? Not sure how these things are constructed. https://imgur.com/BXRr3bd No you are OK. scrape it out to good wood, fill with car body filler and paint Be brutal. Get all the soft and/or rotten timber out and flood it with clear cuprinol. Leave for 7 days for the cuprinol to soak in and dry before making any repairs. Best done in hot, dry weather, like we had through most of April. |
#6
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
On Sunday, 10 May 2020 12:39:39 UTC+1, Andrew wrote:
On 09/05/2020 13:20, The Natural Philosopher wrote: On 09/05/2020 11:56, ss wrote: I have a area of rot on a window frame (image attached). I hacve scraped it out and will let it dry for a few days then intend to use wood rot hardener then fill with 2-part epoxy stuff. Is this the best way to go or should I cut a section out and replace the wood. Damaged area is approx 20cms long and approx 2cms at widest. Other question that piece of the sill does that go through to the interior of the frame? Not sure how these things are constructed. https://imgur.com/BXRr3bd No you are OK. scrape it out to good wood, fill with car body filler and paint Be brutal. Get all the soft and/or rotten timber out and flood it with clear cuprinol. Leave for 7 days for the cuprinol to soak in and dry before making any repairs. Best done in hot, dry weather, like we had through most of April. Cuprinol is oil based, sure won't help adhesion. NT |
#7
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
|
#8
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
alan_m Wrote in message:
On 10/05/2020 18:52, wrote: Cuprinol is oil based, sure won't help adhesion. Ronseal wet rot wood hardener is much more effective and works within the hour *Any* wet rot wood hardener. The quick ones are all styrene monomer. -- Jimk ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#9
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
On 09/05/2020 11:56, ss wrote:
I have a area of rot on a window frame (image attached). I hacve scraped it out and will let it dry for a few days then intend to use wood rot hardener then fill with 2-part epoxy stuff. Is this the best way to go or should I cut a section out and replace the wood. Damaged area is approx 20cms long and approx 2cms at widest. Other question that piece of the sill does that go through to the interior of the frame? Not sure how these things are constructed. https://imgur.com/BXRr3bd Judging by the photo just fill with 2 part wood filler or 2 part car body filler (whichever you can get the cheapest). What I've done in the past with a much bigger area of damage is to cut out as much rot as passible, treat with wet wood rot hardener and find a piece of decent scrap wood that fills 2/3 of the hole and treat that as well. Fill the back of the hole with 2 part filler, hammer the scrap wood into the filler and then fill the rest of the hole covering the wooden fillet. The scrap wood saves having to use too much 2 part filler. Repair like this lasted me 5+ years before the windows were replaced with UPVC. -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
#10
Posted to uk.d-i-y
|
|||
|
|||
Window frame, rot.
In article ,
ss wrote: I have a area of rot on a window frame (image attached). I hacve scraped it out and will let it dry for a few days then intend to use wood rot hardener then fill with 2-part epoxy stuff. Which should last as long as the new paint. Not any longer than filling it with cement. ;-) Is this the best way to go or should I cut a section out and replace the wood. Damaged area is approx 20cms long and approx 2cms at widest. Other question that piece of the sill does that go through to the interior of the frame? Not sure how these things are constructed. I've replaced the entire sill on a sash window without removing the frame. -- *Frustration is trying to find your glasses without your glasses. Dave Plowman London SW To e-mail, change noise into sound. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wet rot or dry rot? | UK diy | |||
Need Help Install Window Air Conditioner in Storm Window Frame | Home Repair | |||
installing double-pane windows: double-sided tape separating from window or window-frame | Home Repair | |||
Door Frame Repair - Rot | Home Repair | |||
repairing minor wood rot in window frame? | Home Repair |