I have mislaid my Instruction leaflet for my WR1. The red alarm light in on
and the Drayton Motorised Valve is stuck in the Hot Water position. As a
result I have Hot Water but no heating. The Hive Thermostat is showing the
correct indications sand these are transmitted to the box fixed outside the
airing cupboard as shown by the appropriate green lights. The WR1 is inside
the airing cupboard and does not use batteries - it is mains connected. I
would like to get an instruction leaflet so I can try resetting the unit to
clear the red alarm light. I think I've done it once before but it was a long
time ago.

--
for full context, visit https://www.homeownershub.com/uk-diy...e-1424714-.htm