Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On Mon, 14 Oct 2019 20:56:44 +0100, Chris Green wrote:
Jim K... wrote: Chris Green Wrote in message: I want to fit a PIR to a corner of the house so that it will detect people approaching along either of the adjacent walls. Strictly that's 270 degrees but I've never seen a 270 degree PIR. :-) I can't see anything that obviously fills the bill from Screwfix or Toolstation. Can anyone recommend something that will do the job and won't cost an arm and a leg? I've tried a few economical ones over the years but they all seem to lose sensitivity pretty quickly compared to the Steinel that they replaced... Currently got a microwave sensor on another outdoor light, that is doing very well. Yes, I was wondering if a microwave one might be more reliable. What make is the one you've got? Microwave ones are prone to triggering on heavy rain/snow. The cheaper ones are all more or less 360deg but with the front sensitivity higher than rear and flank. If you want to play with the modules they cost about 85p each from Aliexpress including postage from China! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
exterior "360" degree PIR recommedations please? | UK diy | |||
plidoweInformation wanted about Stanley No. 360 miter box and 30" x6"mated Stanley back saw | Woodworking | |||
Can I replace 2.5-mm/40-degree knives with 3-mm/45-degree ones? | Woodworking | |||
135 Degree worktop joint (external 45 degree) | UK diy |