DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Anglian Defender 3000 alarm system, does not work after power cut. (https://www.diybanter.com/uk-diy/638843-anglian-defender-3000-alarm-system-does-not-work-after-power-cut.html)

gjb August 15th 19 11:44 AM

Anglian Defender 3000 alarm system, does not work after power cut.
 
We had a power cut last night for just over 1 hour. When we went to set the
alarm it does not work. The power light is lit on the panel and there is a red
and green light on the power supply unit. Salamander Alarms Ltd say the
control panel has dropped out and an engineer will need to visit at a cost of
£150. We are pensioners and that is a lot, can anyone help please

--
for full context, visit https://www.homeownershub.com/uk-diy...e-1378072-.htm



Martin Brown[_2_] August 15th 19 01:19 PM

Anglian Defender 3000 alarm system, does not work after powercut.
 
On 15/08/2019 11:44, gjb wrote:
We had a power cut last night for just over 1 hour. When we went to set the
alarm it does not work. The power light is lit on the panel and there is
a red
and green light on the power supply unit. Salamander Alarms Ltd say the
control panel has dropped out and an engineer will need to visit at a
cost of
£150. We are pensioners and that is a lot, can anyone help please


Chances are its backup battery has failed.

Most alarm systems can last for a while on their emergency battery
reserve and recover gracefully from a powercut. If they don't then you
probably do need a service visit (unless you happen to know the
engineers access code and dismantle sequence for the anti-tamper
features on the control panel). Get it wrong and the external bell and
maybe internal ones will panic by ringing until its battery runs out
(which may not be all that long if it has an ancient battery in too).

You could try cycling the power a few times and crossing your fingers.

Back in 2007 there are few threads on alarm forums recommending junking
this model when they go seriously wrong (perhaps an overreaction).

https://www.thesecurityinstaller.co....r-3000-system/

Salamander might sell you a manual if you don't already have one.

--
Regards,
Martin Brown

Tim+[_5_] August 15th 19 02:29 PM

Anglian Defender 3000 alarm system, does not work afterpower cut.
 
Martin Brown wrote:
On 15/08/2019 11:44, gjb wrote:
We had a power cut last night for just over 1 hour. When we went to set the
alarm it does not work. The power light is lit on the panel and there is
a red
and green light on the power supply unit. Salamander Alarms Ltd say the
control panel has dropped out and an engineer will need to visit at a
cost of
£150. We are pensioners and that is a lot, can anyone help please


Chances are its backup battery has failed.

Most alarm systems can last for a while on their emergency battery
reserve and recover gracefully from a powercut. If they don't then you
probably do need a service visit (unless you happen to know the
engineers access code and dismantle sequence for the anti-tamper
features on the control panel). Get it wrong and the external bell and
maybe internal ones will panic by ringing until its battery runs out
(which may not be all that long if it has an ancient battery in too).


The external sounder will usually have its own batteries. These can run a
piezo-electric siren for bloody ages.

Tim

--
Please don't feed the trolls

Michael Chare[_4_] August 16th 19 12:05 AM

Anglian Defender 3000 alarm system, does not work after powercut.
 
On 15/08/2019 11:44, gjb wrote:
We had a power cut last night for just over 1 hour. When we went to set the
alarm it does not work. The power light is lit on the panel and there is
a red
and green light on the power supply unit. Salamander Alarms Ltd say the
control panel has dropped out and an engineer will need to visit at a
cost of
£150. We are pensioners and that is a lot, can anyone help please


If you get the Engineering manual, perhaps by download it is possible to
look after the alarm yourself.

The manual will most likely tell you how to reset the alarm to clear the
engineer login code so that you can then set a new one.

If you look after the alarm yourself that may have an impact on your
property insurance.

--
Michael Chare

alan_m August 16th 19 09:24 AM

Anglian Defender 3000 alarm system, does not work after powercut.
 
On 16/08/2019 00:05, Michael Chare wrote:

If you look after the alarm yourself that may have an impact on your
property insurance.



If you look after the alarm yourself don't tell the insurance company
that you have an alarm. The saving in premiums for having an
(maintained) alarm and BS approved door/window locks is usually
insignificant.

--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk

charles August 16th 19 10:43 AM

Anglian Defender 3000 alarm system, does not work after power cut.
 
In article ,
alan_m wrote:
On 16/08/2019 00:05, Michael Chare wrote:


If you look after the alarm yourself that may have an impact on your
property insurance.



If you look after the alarm yourself don't tell the insurance company
that you have an alarm. The saving in premiums for having an
(maintained) alarm and BS approved door/window locks is usually
insignificant.


unless they insist on you having these.

--
from KT24 in Surrey, England
"I'd rather die of exhaustion than die of boredom" Thomas Carlyle

ARW August 16th 19 07:43 PM

Anglian Defender 3000 alarm system, does not work after powercut.
 
On 16/08/2019 10:43, charles wrote:
In article ,
alan_m wrote:
On 16/08/2019 00:05, Michael Chare wrote:


If you look after the alarm yourself that may have an impact on your
property insurance.



If you look after the alarm yourself don't tell the insurance company
that you have an alarm. The saving in premiums for having an
(maintained) alarm and BS approved door/window locks is usually
insignificant.


unless they insist on you having these.


Then you are probably not a poor pensioner.

I set of an alarm(silent) at a house by not closing a certain internal
door and then opening another certain internal door. A monitored system.

The butler forgot to warn me.

--
Adam


All times are GMT +1. The time now is 01:07 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter