|
Dining chair refurbish, what glue to use?
We have some old (as in 1930s I think) dining room chairs which need
refurbishing. They are made of oak with dowel joints which are nearly all coming loose. So, I can take them all apart pretty easily and clean them up but I'm wondering what glue to use. Something reasonably quick setting would be handy so I can re-assemble fairly quickly, but apart from that I'm a bit lost. Nearly all the 'wood' glue I can find at ScrewFix and Toolstation seems to be PVA, is this the way to go and, if so, what's recommended for quick setting? -- Chris Green · |
Dining chair refurbish, what glue to use?
On 13/08/2019 13:36, Chris Green wrote:
We have some old (as in 1930s I think) dining room chairs which need refurbishing. They are made of oak with dowel joints which are nearly all coming loose. So, I can take them all apart pretty easily and clean them up but I'm wondering what glue to use. Something reasonably quick setting would be handy so I can re-assemble fairly quickly, but apart from that I'm a bit lost. Nearly all the 'wood' glue I can find at ScrewFix and Toolstation seems to be PVA, is this the way to go and, if so, what's recommended for quick setting? If the joint is tight fitting, then a wood glue will do ok. Something like Titebond III retains slightly more elasticity when set than the more traditional PVAs - although its slower curing that say Titebond original. For loose fitting joints or where set time is critical, then 5 minute epoxy. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Dining chair refurbish, what glue to use?
On Tue, 13 Aug 2019 16:57:08 +0100, John Rumm wrote:
On 13/08/2019 13:36, Chris Green wrote: We have some old (as in 1930s I think) dining room chairs which need refurbishing. They are made of oak with dowel joints which are nearly all coming loose. So, I can take them all apart pretty easily and clean them up but I'm wondering what glue to use. Something reasonably quick setting would be handy so I can re-assemble fairly quickly, but apart from that I'm a bit lost. Nearly all the 'wood' glue I can find at ScrewFix and Toolstation seems to be PVA, is this the way to go and, if so, what's recommended for quick setting? If the joint is tight fitting, then a wood glue will do ok. Something like Titebond III retains slightly more elasticity when set than the more traditional PVAs - although its slower curing that say Titebond original. For loose fitting joints or where set time is critical, then 5 minute epoxy. I used Cascamite, but I was willing to wait! -- My posts are my copyright and if @diy_forums or Home Owners' Hub wish to copy them they can pay me £1 a message. Use the BIG mirror service in the UK: http://www.mirrorservice.org *lightning surge protection* - a w_tom conductor |
Dining chair refurbish, what glue to use?
On Tue, 13 Aug 2019 17:46:26 +0100, Brian Gaff wrote:
If the chairs actually wobble the wood has probably dried out so any glue is going to crack again. Just done four dining chairs from the in-laws with loose backs and legs. Joints fairly tight but not tight enough to stop a wobble. I just used PVA wood glue. Did a couple here the same way a few years ago, still solid. Not sure that a glue that sets quickly is a good idea witha complex structure like a chair. Something may fit well together but not quite in the right place when fitted to the rest of the chair. Being able to assemble and get everything into the right place for the whole is what you want. I'm sure there used to be something that expanded a bit after it was assembled but I've forgotten it now. Doesn't Gorrila Glue foam up? -- Cheers Dave. |
Dining chair refurbish, what glue to use?
On 13/08/2019 20:33, Dave Liquorice wrote:
On Tue, 13 Aug 2019 17:46:26 +0100, Brian Gaff wrote: If the chairs actually wobble the wood has probably dried out so any glue is going to crack again. Just done four dining chairs from the in-laws with loose backs and legs. Joints fairly tight but not tight enough to stop a wobble. I just used PVA wood glue. Did a couple here the same way a few years ago, still solid. Not sure that a glue that sets quickly is a good idea witha complex structure like a chair. Something may fit well together but not quite in the right place when fitted to the rest of the chair. Being able to assemble and get everything into the right place for the whole is what you want. I'm sure there used to be something that expanded a bit after it was assembled but I've forgotten it now. Doesn't Gorrila Glue foam up? It does, but the foam has no gap filling strength. If you need gap filling then epoxy (with added filler if required) is the usual way to go). -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
| All times are GMT +1. The time now is 09:53 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter