DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Best and cheapest way to make woodshed base. (https://www.diybanter.com/uk-diy/635960-re-best-cheapest-way-make-woodshed-base.html)

Tim Watts[_5_] May 23rd 19 10:13 AM

Best and cheapest way to make woodshed base.
 
On 22/05/2019 17:02, The Natural Philosopher wrote:

I am thinking over the pros and cons of concrete versus concrete slabs
on mortar.

The sub base is loose gravel over MOT type 1 thats been down 16 years. I
can use the loose gravel to make concrete with. Obviously with sand as well


Area is 3m x 1.8m

Seems to come aout around £120 no matter which way I look - anyone got
hard info?



Me: I'd put a concrete pad at each corner and also midpoints if the shed
is long and use those plastic adjustable shed base "feet" (4-5 inch
diameter screw type legs) to run treated wooden bearers across, then
plant the shed on top.

If your pads sink slightly, you can tweak the legs up (4' bar to take
the weight off them slightly and screw the head up).

I've got them under mine as the old shed base is solid, but went on a
major 4" lean along its length.

Advantages: less concrete, adjustable, keeps the wood off the damp ground.

Disadvantages: needs more height. But if it's all gravel, you could rake
a few inches off the top maybe and sink the subframe into the ground?

--
Email does not work

Dennis@home May 23rd 19 04:46 PM

Best and cheapest way to make woodshed base.
 
On 23/05/2019 10:13, Tim Watts wrote:
On 22/05/2019 17:02, The Natural Philosopher wrote:

I am thinking over the pros and cons of concrete versus concrete slabs
on mortar.

The sub base is loose gravel over MOT type 1 thats been down 16 years.
I can use the loose gravel to make concrete with. Obviously with sand
as well


Area is 3m x 1.8m

Seems to come aout around £120 no matter which way I look - anyone got
hard info?



Me: I'd put a concrete pad at each corner and also midpoints if the shed
is long and use those plastic adjustable shed base "feet" (4-5 inch
diameter screw type legs) to run treated wooden bearers across, then
plant the shed on top.

If your pads sink slightly, you can tweak the legs up (4' bar to take
the weight off them slightly and screw the head up).

I've got them under mine as the old shed base is solid, but went on a
major 4" lean along its length.

Advantages: less concrete, adjustable, keeps the wood off the damp ground.

Disadvantages: needs more height. But if it's all gravel, you could rake
a few inches off the top maybe and sink the subframe into the ground?



My shed rests on 8 ft concrete fence posts.


Marland May 23rd 19 06:50 PM

Best and cheapest way to make woodshed base.
 
dennis@home wrote:
On 23/05/2019 10:13, Tim Watts wrote:
On 22/05/2019 17:02, The Natural Philosopher wrote:

I am thinking over the pros and cons of concrete versus concrete slabs
on mortar.

The sub base is loose gravel over MOT type 1 thats been down 16 years.
I can use the loose gravel to make concrete with. Obviously with sand
as well


Area is 3m x 1.8m

Seems to come aout around £120 no matter which way I look - anyone got
hard info?



Me: I'd put a concrete pad at each corner and also midpoints if the shed
is long and use those plastic adjustable shed base "feet" (4-5 inch
diameter screw type legs) to run treated wooden bearers across, then
plant the shed on top.

If your pads sink slightly, you can tweak the legs up (4' bar to take
the weight off them slightly and screw the head up).

I've got them under mine as the old shed base is solid, but went on a
major 4" lean along its length.

Advantages: less concrete, adjustable, keeps the wood off the damp ground.

Disadvantages: needs more height. But if it's all gravel, you could rake
a few inches off the top maybe and sink the subframe into the ground?



My shed rests on 8 ft concrete fence posts.



Doesnt that make it difficult to reach the door handle.

GH


Bob Eager[_7_] May 23rd 19 07:19 PM

Best and cheapest way to make woodshed base.
 
On Thu, 23 May 2019 17:50:08 +0000, Marland wrote:

dennis@home wrote:
On 23/05/2019 10:13, Tim Watts wrote:
On 22/05/2019 17:02, The Natural Philosopher wrote:

I am thinking over the pros and cons of concrete versus concrete
slabs on mortar.

The sub base is loose gravel over MOT type 1 thats been down 16
years. I can use the loose gravel to make concrete with. Obviously
with sand as well


Area is 3m x 1.8m

Seems to come aout around £120 no matter which way I look - anyone
got hard info?



Me: I'd put a concrete pad at each corner and also midpoints if the
shed is long and use those plastic adjustable shed base "feet" (4-5
inch diameter screw type legs) to run treated wooden bearers across,
then plant the shed on top.

If your pads sink slightly, you can tweak the legs up (4' bar to take
the weight off them slightly and screw the head up).

I've got them under mine as the old shed base is solid, but went on a
major 4" lean along its length.

Advantages: less concrete, adjustable, keeps the wood off the damp
ground.

Disadvantages: needs more height. But if it's all gravel, you could
rake a few inches off the top maybe and sink the subframe into the
ground?



My shed rests on 8 ft concrete fence posts.



Doesnt that make it difficult to reach the door handle.


No. He lives in a swamp and they are the piling!


--
My posts are my copyright and if @diy_forums or Home Owners' Hub
wish to copy them they can pay me £1 a message.
Use the BIG mirror service in the UK: http://www.mirrorservice.org
*lightning surge protection* - a w_tom conductor

Dennis@home May 23rd 19 11:21 PM

Best and cheapest way to make woodshed base.
 
On 23/05/2019 18:50, Marland wrote:
dennis@home wrote:
On 23/05/2019 10:13, Tim Watts wrote:
On 22/05/2019 17:02, The Natural Philosopher wrote:

I am thinking over the pros and cons of concrete versus concrete slabs
on mortar.

The sub base is loose gravel over MOT type 1 thats been down 16 years.
I can use the loose gravel to make concrete with. Obviously with sand
as well


Area is 3m x 1.8m

Seems to come aout around £120 no matter which way I look - anyone got
hard info?



Me: I'd put a concrete pad at each corner and also midpoints if the shed
is long and use those plastic adjustable shed base "feet" (4-5 inch
diameter screw type legs) to run treated wooden bearers across, then
plant the shed on top.

If your pads sink slightly, you can tweak the legs up (4' bar to take
the weight off them slightly and screw the head up).

I've got them under mine as the old shed base is solid, but went on a
major 4" lean along its length.

Advantages: less concrete, adjustable, keeps the wood off the damp ground.

Disadvantages: needs more height. But if it's all gravel, you could rake
a few inches off the top maybe and sink the subframe into the ground?



My shed rests on 8 ft concrete fence posts.



Doesnt that make it difficult to reach the door handle.

GH


Only if done by a brexiteer.



All times are GMT +1. The time now is 10:10 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter