Shower Screen Wall support
 

Planning a shower and I am concerned about the usual bracket / rod that
goes from the top of a glass shower screen to the adjacent wall. That wall
is plasterboard (no timber - just plasterboard sandwich) and I am worried
that if my slightly wobbly wife stumbled into the screen then the wall
would not take the strain and it would pull out and damage the wall.

I was wondering about two rods - at an angle to form a Vee and attached
into the ceiling joists.

Any thoughts?

Shower Screen Wall support
 

DerbyBorn wrote:

I was wondering about two rods - at an angle to form a Vee and attached
into the ceiling joists.

Sounds reasonable, you could lash up from various parts, e.g.

https://www.kerolhardware.co.uk/shower-stabiliser-bar.html

Shower Screen Wall support
 

If she is wobbly would it not be best to make a hand rail anyway, at a more
convenient level?
Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"Andy Burns" wrote in message
...
DerbyBorn wrote:

I was wondering about two rods - at an angle to form a Vee and attached
into the ceiling joists.

Sounds reasonable, you could lash up from various parts, e.g.

https://www.kerolhardware.co.uk/shower-stabiliser-bar.html

Shower Screen Wall support
 

"Brian Gaff" wrote in
:

If she is wobbly would it not be best to make a hand rail anyway, at a
more convenient level?
Brian


I agree Brian - my plasterboard walls are my concern with that as well.

Shower Screen Wall support
 

On 09/05/2019 23:17, DerbyBorn wrote:
Planning a shower and I am concerned about the usual bracket / rod that
goes from the top of a glass shower screen to the adjacent wall. That wall
is plasterboard (no timber - just plasterboard sandwich) and I am worried
that if my slightly wobbly wife stumbled into the screen then the wall
would not take the strain and it would pull out and damage the wall.

I was wondering about two rods - at an angle to form a Vee and attached
into the ceiling joists.

Any thoughts?

One of ours looks a bit like this...

https://flush-bathrooms.co.uk/produc...-chrome-gac007

....just a pole from floor (tray actually) to ceiling with a slot for the
glass.

Cheers
--
Clive

Shower Screen Wall support
 

One of ours looks a bit like this...

https://flush-bathrooms.co.uk/produc...-ceiling-suppo
rt-pole-max-2800mm-high-8mm-glass-chrome-gac007

...just a pole from floor (tray actually) to ceiling with a slot for
the glass.

Cheers

Great idea. How is it attached to the tray?

Shower Screen Wall support
 

DerbyBorn Wrote in message:


One of ours looks a bit like this...

https://flush-bathrooms.co.uk/produc...-ceiling-suppo
rt-pole-max-2800mm-high-8mm-glass-chrome-gac007

...just a pole from floor (tray actually) to ceiling with a slot for
the glass.

Cheers

Great idea. How is it attached to the tray?


Some sort of screw down ferrule that the pole slots into?
--
Jim K


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

Shower Screen Wall support
 

On 10/05/2019 14:34, DerbyBorn wrote:

One of ours looks a bit like this...

https://flush-bathrooms.co.uk/produc...-ceiling-suppo
rt-pole-max-2800mm-high-8mm-glass-chrome-gac007

...just a pole from floor (tray actually) to ceiling with a slot for
the glass.

Cheers

Great idea. How is it attached to the tray?

There's a plastic 'cup' it sits in. I don't know how that is attached,
but it has silicone around it and I guess it must be screwed through the
tray - it's on the raised edge of the tray obviously.

Cheers
--
Clive