DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   The basketball hoop (https://www.diybanter.com/uk-diy/631699-basketball-hoop.html)

Bill Wright[_3_] February 25th 19 09:06 PM

The basketball hoop
 
The other grandad bought it for Buster (8). Buster's dad tried to screw
it to the wall and failed. I was invited to Sunday dinner, but asked to
come early.

Son-in-law has a good hammer drill (thanks to my advice). He has a full
set of SDS drill bits (thanks to my generosity). But the supplied plugs
were very hard plastic and were too big to be tapped into a 7mm hole and
were loose in an 8mm hole. The supplied screws had narrow necks and big
heads. The necks sheared off with only moderate torque applied. Poor lad
thought it was him. I had to reassure him that it was the plugs and
screws. He had a few plugs and screws loose in his toolbox so we
managed. Then we had fish pie.

Bill

Malcolm Race[_2_] February 26th 19 12:05 AM

The basketball hoop
 
On 25/02/2019 21:06, Bill Wright wrote:
The other grandad bought it for Buster (8). Buster's dad tried to screw
it to the wall and failed. I was invited to Sunday dinner, but asked to
come early.

Son-in-law has a good hammer drill (thanks to my advice). He has a full
set of SDS drill bits (thanks to my generosity). But the supplied plugs
were very hard plastic and were too big to be tapped into a 7mm hole and
were loose in an 8mm hole. The supplied screws had narrow necks and big
heads. The necks sheared off with only moderate torque applied. Poor lad
thought it was him. I had to reassure him that it was the plugs and
screws. He had a few plugs and screws loose in his toolbox so we
managed. Then we had fish pie.

Bill

I NEVER use the fixings supplied. 5.5mm SDS, red plugs and 4mm screws
will fix most thinds

Malcolm

---
This email has been checked for viruses by AVG.
https://www.avg.com


Bill Wright[_3_] February 26th 19 02:14 AM

The basketball hoop
 
On 26/02/2019 00:05, Malcolm Race wrote:
On 25/02/2019 21:06, Bill Wright wrote:
The other grandad bought it for Buster (8). Buster's dad tried to
screw it to the wall and failed. I was invited to Sunday dinner, but
asked to come early.

Son-in-law has a good hammer drill (thanks to my advice). He has a
full set of SDS drill bits (thanks to my generosity). But the supplied
plugs were very hard plastic and were too big to be tapped into a 7mm
hole and were loose in an 8mm hole. The supplied screws had narrow
necks and big heads. The necks sheared off with only moderate torque
applied. Poor lad thought it was him. I had to reassure him that it
was the plugs and screws. He had a few plugs and screws loose in his
toolbox so we managed. Then we had fish pie.

Bill

I NEVER use the fixings supplied.Â* 5.5mm SDS, red plugs and 4mm screws
will fix most thinds


Ohh that's small! I have red plugs but never use them. It's easier to
get a good fix with a bigger plug. I use No 6 or No 8 screws into 7mm
plugs, or 8/10 screws into 10mm plugs.

Bill

FMurtz February 26th 19 05:34 AM

The basketball hoop
 
Bill Wright wrote:
On 26/02/2019 00:05, Malcolm Race wrote:
On 25/02/2019 21:06, Bill Wright wrote:
The other grandad bought it for Buster (8). Buster's dad tried to
screw it to the wall and failed. I was invited to Sunday dinner, but
asked to come early.

Son-in-law has a good hammer drill (thanks to my advice). He has a
full set of SDS drill bits (thanks to my generosity). But the
supplied plugs were very hard plastic and were too big to be tapped
into a 7mm hole and were loose in an 8mm hole. The supplied screws
had narrow necks and big heads. The necks sheared off with only
moderate torque applied. Poor lad thought it was him. I had to
reassure him that it was the plugs and screws. He had a few plugs and
screws loose in his toolbox so we managed. Then we had fish pie.

Bill

I NEVER use the fixings supplied.Â* 5.5mm SDS, red plugs and 4mm screws
will fix most thinds


Ohh that's small! I have red plugs but never use them. It's easier to
get a good fix with a bigger plug. I use No 6 or No 8 screws into 7mm
plugs, or 8/10 screws into 10mm plugs.

Bill

Basket ball hoops need heavy duty metal fixings, people hang off them

Brian Gaff February 26th 19 09:00 AM

The basketball hoop
 
Yes, I had an outdoor alarm device with fixing kit that seemed to have been
made to the cheapest possible specs imaginable some years ago, if they are
not going to provide things that work, why supply them at all, one wonders?

Its like sometimes you get cable ties for helpfully keeping 12v lines of
garden lights tidy, but they are made of a plastic that given one frost and
hot summer break up.

I'm sure there is a law of nature involved in this sort of thing.
Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"Bill Wright" wrote in message
...
The other grandad bought it for Buster (8). Buster's dad tried to screw it
to the wall and failed. I was invited to Sunday dinner, but asked to come
early.

Son-in-law has a good hammer drill (thanks to my advice). He has a full
set of SDS drill bits (thanks to my generosity). But the supplied plugs
were very hard plastic and were too big to be tapped into a 7mm hole and
were loose in an 8mm hole. The supplied screws had narrow necks and big
heads. The necks sheared off with only moderate torque applied. Poor lad
thought it was him. I had to reassure him that it was the plugs and
screws. He had a few plugs and screws loose in his toolbox so we managed.
Then we had fish pie.

Bill




Dave Plowman (News) February 26th 19 11:10 AM

The basketball hoop
 
In article ,
Bill Wright wrote:
The other grandad bought it for Buster (8). Buster's dad tried to screw
it to the wall and failed. I was invited to Sunday dinner, but asked to
come early.


Son-in-law has a good hammer drill (thanks to my advice). He has a full
set of SDS drill bits (thanks to my generosity). But the supplied plugs
were very hard plastic and were too big to be tapped into a 7mm hole and
were loose in an 8mm hole. The supplied screws had narrow necks and big
heads. The necks sheared off with only moderate torque applied. Poor lad
thought it was him. I had to reassure him that it was the plugs and
screws. He had a few plugs and screws loose in his toolbox so we
managed. Then we had fish pie.


Could be just me, but most supplied screws and plugs end up unopened in a
box full of such things. They hardly ever look fit for purpose - apart
from perhaps fixing into wood.

--
*INDECISION is the key to FLEXIBILITY *

Dave Plowman London SW
To e-mail, change noise into sound.

soup[_9_] February 26th 19 11:20 AM

The basketball hoop
 
On 26/02/2019 09:56, Tim+ wrote:
FMurtz Wrote in message:
Basket ball hoops need heavy duty metal fixings, people hang

off them

But why? There's absolutely no reason to, it's not part of the
game. It's just abuse of a bit of sporting eqipment.


It may not be part of the game/in the rules etc but it happens all the
time so should really be catered for

Jim K.. February 26th 19 11:21 AM

The basketball hoop
 
FMurtz Wrote in message:
Bill Wright wrote:
On 26/02/2019 00:05, Malcolm Race wrote:
On 25/02/2019 21:06, Bill Wright wrote:
The other grandad bought it for Buster (8). Buster's dad tried to
screw it to the wall and failed. I was invited to Sunday dinner, but
asked to come early.

Son-in-law has a good hammer drill (thanks to my advice). He has a
full set of SDS drill bits (thanks to my generosity). But the
supplied plugs were very hard plastic and were too big to be tapped
into a 7mm hole and were loose in an 8mm hole. The supplied screws
had narrow necks and big heads. The necks sheared off with only
moderate torque applied. Poor lad thought it was him. I had to
reassure him that it was the plugs and screws. He had a few plugs and
screws loose in his toolbox so we managed. Then we had fish pie.

Bill
I NEVER use the fixings supplied. 5.5mm SDS, red plugs and 4mm screws
will fix most thinds


Ohh that's small! I have red plugs but never use them. It's easier to
get a good fix with a bigger plug. I use No 6 or No 8 screws into 7mm
plugs, or 8/10 screws into 10mm plugs.

Bill

Basket ball hoops need heavy duty metal fixings, people hang off them


At age 8? Circus beckons....
--
Jim K


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

soup[_9_] February 26th 19 05:07 PM

The basketball hoop
 
On 26/02/2019 11:20, Jim K.. wrote:
FMurtz Wrote in message:


Basket ball hoops need heavy duty metal fixings, people hang off them


At age 8? Circus beckons....


https://www.youtube.com/watch?v=veWKsuXLdMo

Jim K.. February 26th 19 06:21 PM

The basketball hoop
 
soup Wrote in message:
On 26/02/2019 11:20, Jim K.. wrote:
FMurtz Wrote in message:


Basket ball hoops need heavy duty metal fixings, people hang off them


At age 8? Circus beckons....


https://www.youtube.com/watch?v=veWKsuXLdMo


Hardly self inflicted was it?!
--
Jim K


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

Marland February 28th 19 09:53 AM

The basketball hoop
 
Tim+ wrote:
FMurtz Wrote in message:
Basket ball hoops need heavy duty metal fixings, people hang

off them

But why? There's absolutely no reason to, it's not part of the
game. It's just abuse of a bit of sporting eqipment.

Tim




What is abuse to you will be just another game ,adventure, challenge to a
youngster.
And if it is actually strong enough to take the abuse and so is the surface
on which it is mounted you may as well mount firm enough to take that abuse
and get more utilisation out of it.

Incidentally I helped someone nearby dismantle a childs swing as the
daughter had grown too old for it.
It had only been in place for about 9 years but the thin metal tubing where
the swing hangers were mounted and trapped water and crud had corroded to
the point that the tubes just crumbled.
Fortunately the girl had stopped using it a couple of years before ,
something to watch out for if you or other members of the family have one.
In contrast the 1950s angle iron of the one I had which saw about 15 years
service by me and my siblings is still doing service as part of a shed
roof.

GH



Robin February 28th 19 10:22 AM

The basketball hoop
 
On 26/02/2019 09:56, Tim+ wrote:
FMurtz Wrote in message:
Basket ball hoops need heavy duty metal fixings, people hang

off them

But why? There's absolutely no reason to, it's not part of the
game. It's just abuse of a bit of sporting eqipment.


According to whose rules? FIBA's allow it in some cases. See 36.2.1

"A technical foul is a player non-contact foul of a behavioural nature
including, but not limited to:
....
Hanging on the ring in such a way that the weight of the player is
supported by the ring, unless a player grasps the ring momentarily
following a dunk shot or, in the judgement of an official, is trying to
prevent injury to himself or to another player."


--
Robin
reply-to address is (intended to be) valid

Rod Speed February 28th 19 04:44 PM

The basketball hoop
 


"Marland" wrote in message
...
Tim+ wrote:
FMurtz Wrote in message:
Basket ball hoops need heavy duty metal fixings, people hang

off them

But why? There's absolutely no reason to, it's not part of the
game. It's just abuse of a bit of sporting eqipment.

Tim


What is abuse to you will be just another game ,adventure, challenge to a
youngster.
And if it is actually strong enough to take the abuse and so is the
surface
on which it is mounted you may as well mount firm enough to take that
abuse
and get more utilisation out of it.

Incidentally I helped someone nearby dismantle a childs swing as the
daughter had grown too old for it.
It had only been in place for about 9 years but the thin metal tubing
where
the swing hangers were mounted and trapped water and crud had corroded to
the point that the tubes just crumbled.
Fortunately the girl had stopped using it a couple of years before ,
something to watch out for if you or other members of the family have one.
In contrast the 1950s angle iron of the one I had which saw about 15
years
service by me and my siblings is still doing service as part of a shed
roof.


I welded up my two gates using square metal tubing, what we call RHS,
and they have lasted fine for 45 years now because I ensured that there
is never any trapped water. Havent even got any rust either because
I wire brushed and painted them carefully.


Peeler[_3_] February 28th 19 07:57 PM

The Basketcase Ozzie Troll!
 
On Fri, 1 Mar 2019 03:44:39 +1100, cantankerous trolling senile geezer Rot
Speed blabbered, again:


I welded up my two gates


I guess nobody cares, senile asshole!

--
Bod addressing abnormal senile quarreller Rot:
"Do you practice arguing with yourself in an empty room?"
MID:


All times are GMT +1. The time now is 04:17 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter