Cable grip in back box
 

I got a 2 gang surface mount back box the other day that had cable grips
in it, which I thought was a good idea.

But it only had two, and they weren't opposite but one on the side and
the other top (or bottom).
Has anyone any idea why this would be? Why not fit them on all four sides?

Cable grip in back box
 

On Friday, 1 February 2019 17:15:09 UTC, R D S wrote:
I got a 2 gang surface mount back box the other day that had cable grips
in it, which I thought was a good idea.
But it only had two, and they weren't opposite but one on the side and
the other top (or bottom).
Has anyone any idea why this would be? Why not fit them on all four sides?

For a cooker switch with an outlet cable, probably. Cable grips take up space, and cost the manufacturer money, so they don't fit four. Only one will be likely to be required.

Owain

Cable grip in back box
 

In article ,
writes:
On Friday, 1 February 2019 17:15:09 UTC, R D S wrote:
I got a 2 gang surface mount back box the other day that had cable grips
in it, which I thought was a good idea.
But it only had two, and they weren't opposite but one on the side and
the other top (or bottom).
Has anyone any idea why this would be? Why not fit them on all four sides?

For a cooker switch with an outlet cable, probably. Cable grips take up space, and cost the manufacturer money, so they don't fit four. Only one will be likely to be required.

You could get a back box with conduit knock-outs, and fit cable glands.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]

Cable grip in back box
 

On 04/02/2019 10:41, Dave Plowman (News) wrote:
In article ,
R D S wrote:
I got a 2 gang surface mount back box the other day that had cable grips
in it, which I thought was a good idea.

Really? If there's a chance the cable could be put under strain, shouldn't
it be protected from that by conduit, etc?

No. They are standard pattresses for cooker units. Two grips at
different positions, but only one to be used, depending upon required
orientation. The cable to be secured will be the flexible one to the
cooker and needs to be capable of movement to allow cleaning behind.

SteveW

Cable grip in back box
 

On 01/02/2019 17:15, R D S wrote:
I got a 2 gang surface mount back box the other day that had cable grips
in it, which I thought was a good idea.

But it only had two, and they weren't opposite but one on the side and
the other top (or bottom).
Has anyone any idea why this would be? Why not fit them on all four sides?

Oddly, I ventured into my 'loft stock' (bits bought and not used) the
other day for a back box (single) and found a new one which also had a
cable grip. I don't recall buying it, nor was the bag market as having a
grip etc and I don't recall seeing one before. Grips on the rear of a
face plate for fused/switched flex outlets yes but not on the back box.

--
Always smile when walking, you never know where there is a camera ;-)

Remarkable Coincidences:
The Stock Market Crashes of 1929 and 2008 happened on the same
date in October. In Oct 1907, a run on the Knickerbocker Trust
Company led to the Great Depression.

Cable grip in back box
 

On 01/02/2019 17:32, wrote:

For a cooker switch with an outlet cable, probably.
Ah, makes sense. Cheers.

Cable grip in back box
 

In article ,
Steve Walker wrote:
On 04/02/2019 10:41, Dave Plowman (News) wrote:
In article ,
R D S wrote:
I got a 2 gang surface mount back box the other day that had cable grips
in it, which I thought was a good idea.

Really? If there's a chance the cable could be put under strain, shouldn't
it be protected from that by conduit, etc?

No. They are standard pattresses for cooker units. Two grips at
different positions, but only one to be used, depending upon required
orientation. The cable to be secured will be the flexible one to the
cooker and needs to be capable of movement to allow cleaning behind.

Ah - got you. So not a 'normal' back box? But just as easy to add a cable
clamp to an ordinary one, as to source a special for just that job.

--
*I stayed up all night to see where the sun went. Then it dawned on me.*

Dave Plowman London SW
To e-mail, change noise into sound.

Cable grip in back box
 

On 05/02/2019 13:16, Dave Plowman (News) wrote:
In article ,
Steve Walker wrote:
On 04/02/2019 10:41, Dave Plowman (News) wrote:
In article ,
R D S wrote:
I got a 2 gang surface mount back box the other day that had cable grips
in it, which I thought was a good idea.

Really? If there's a chance the cable could be put under strain, shouldn't
it be protected from that by conduit, etc?

No. They are standard pattresses for cooker units. Two grips at
different positions, but only one to be used, depending upon required
orientation. The cable to be secured will be the flexible one to the
cooker and needs to be capable of movement to allow cleaning behind.

Ah - got you. So not a 'normal' back box? But just as easy to add a cable
clamp to an ordinary one, as to source a special for just that job.

They are also extra deep at 47mm to allow for terminating the thick and
unwieldy cable needed for a combined oven and hob. So yes they are not a
"normal" pattress, but they are a standard one for that specific job.
The cable clamp (often only a single one supplied) is usually a single
piece (plus screws) and relies on the other half of the clamp being a
mounded in section of the box.

For example:

https://www.wickes.co.uk/Wickes-2-Ga...-47mm/p/710034

SteveW