Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
IP Cam configuraton V380
OK, I picked up a really cheap, new it's box, PTZ IP camera from a
charity shop to play about with, which I seem to have tracked down to a model V380. It only offers wifi access, no LAN and it seems to be designed to operate as an access point mode, or to work with an existing wifi access point. The later is selected by pressing the reset button for two seconds and pressing the button (name) on a router to allow it to log in - except it doesn't. That despite resetting a spare router to default 192 range and knowing the cam's default IP is 192.168.1.1. Browsing to 192.168.1.1, whilst connected to it's AP, does nothing. The only official way to configure it, is using an Iphone App, or an Android phone App, to be able to access and change the IP. Needless to say, I don't have access to either. I did manage to find a PC App, which does allow the output of cam to be seen on my laptop, move it, plus audio, providing I switch my network access point from my router, to the cam's AP - but the App seems to have no facility to change the cam's configuration. I want to put the cam on my 10.?.?.? network. I have tried Telnet via various ports (80; 8899, 554) to the cam, when connected to the AP, it doesn't respond at all. Suggestions please to find a way to get in to configure it? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Trying to source cam studs/cam locks | Woodworking | |||
Trying to source cam studs/cam locks | Woodworking | |||
Trying to source cam studs/cam locks | Woodworking | |||
,,CAD/CAM/CAE PROGRAMS, | Electronics Repair | |||
Free CAD/CAM software | Metalworking |