Does anyone know what these grips are called?
 

We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel. Has anyone seen any
of these?

Does anyone know what these grips are called?
 

In article ,
Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel. Has anyone seen any
of these?

Do you mean slip joint pliers? Sometimes called water pump pliers. But not
really like a mole grip, and only a simple pivot, so not as much grip.

--
*If your feet smell and your nose runs, you're built upside down.

Dave Plowman London SW
To e-mail, change noise into sound.

Does anyone know what these grips are called?
 

On 11/01/2019 10:52, Dave Plowman (News) wrote:
In article ,
Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel. Has anyone seen any
of these?

Do you mean slip joint pliers? Sometimes called water pump pliers. But not
really like a mole grip, and only a simple pivot, so not as much grip.

That's what it sounded like to me too. The other slightly clever thing
about them is that they self-tighten (provided you turn them in the
right direction of course).

Does anyone know what these grips are called?
 

Dave Plowman (News) wrote:
In article ,
Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel. Has anyone seen any
of these?

Do you mean slip joint pliers? Sometimes called water pump pliers. But not
really like a mole grip, and only a simple pivot, so not as much grip.


I have a couple of pairs of waterpump pliers - some of the most useful
things I have. The things I'm thinking of are a bit like that though.
Mostly like Mole grips, but having a line of pivots at right-angles to
the line of the handle, rather than just one. You can pull the moving
handle back against the spring, and move the pivot to another recess to
widen the jaws. The name stamped into the handle was French, but I
can't remember it.

Does anyone know what these grips are called?
 

On 11/01/2019 10:52, Dave Plowman (News) wrote:
In article ,
Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel. Has anyone seen any
of these?

Do you mean slip joint pliers? Sometimes called water pump pliers. But not
really like a mole grip, and only a simple pivot, so not as much grip.

No I think they are different - I have seen these; indeed I was using
some only last weekend. (they are very old- but still worked). They
are just like mole grips but the pivot point can be moved like water
pump pliers. Should be on the site where they are this afternoon so I
will take a photo and post it if nothing comes up sooner.

--
Chris B (News)

Does anyone know what these grips are called?
 

On 11/01/2019 11:39, Chris B wrote:
On 11/01/2019 10:52, Dave Plowman (News) wrote:
In article ,
Â*Â*Â* Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.Â* They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around.Â* One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel.Â* Has anyone seen any
of these?

Do you mean slip joint pliers? Sometimes called water pump pliers. But
not
really like a mole grip, and only a simple pivot, so not as much grip.

No I think they are different - I have seen these; indeed I was using
some only last weekend.Â* (they are very old- but still worked).Â*Â* They
are just like mole grips but the pivot point can be moved like water
pump pliers.Â* Should be on the site where they are this afternoon so I
will take a photo and post it if nothing comes up sooner.

Sounds clever. I think the Mole is one of the most useful of tools. I've
heard of people using them as a temporary replacement for a lost
motorcycle gear pedal. The lack of parallelism at wide openings is one
of their few weaknesses.

Does anyone know what these grips are called?
 

Dan S. MacAbre wrote:

a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions

http://www.expert-toolstore.com/facom-lock-grip-pliers/1348-facom-500-short-nose-4-position-lock-grip-pliers

Does anyone know what these grips are called?
 

On Fri, 11 Jan 2019 11:46:46 +0000, newshound wrote:

On 11/01/2019 11:39, Chris B wrote:
On 11/01/2019 10:52, Dave Plowman (News) wrote:
In article ,
Â*Â*Â* Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.Â* They are
retired farmers, and there are interesting mountains of tools both
ancient and modern lying around.Â* One of the modern ones that I
rather liked was like a kind of Mole grip, but the
pivot/fulcrum/whatever could be moved into four positions, a bit like
a deck chair, and it allowed the jaws to open a bit wider, and to
stay a bit more parallel.Â* Has anyone seen any of these?

Do you mean slip joint pliers? Sometimes called water pump pliers. But
not really like a mole grip, and only a simple pivot, so not as much
grip.

No I think they are different - I have seen these; indeed I was using
some only last weekend.Â* (they are very old- but still worked).Â*Â* They
are just like mole grips but the pivot point can be moved like water
pump pliers.Â* Should be on the site where they are this afternoon so I
will take a photo and post it if nothing comes up sooner.

Sounds clever. I think the Mole is one of the most useful of tools. I've
heard of people using them as a temporary replacement for a lost
motorcycle gear pedal. The lack of parallelism at wide openings is one
of their few weaknesses.

I just bought a new pair, the others having 'disappeared'. The pair they
replaced was bought from the same shop (in Brighton) over 50 years ago -
it's now being run by the fifth generation of the family!



--
My posts are my copyright and if @diy_forums or Home Owners' Hub
wish to copy them they can pay me £1 a message.
Use the BIG mirror service in the UK: http://www.mirrorservice.org
*lightning surge protection* - a w_tom conductor

Does anyone know what these grips are called?
 

On 11/01/2019 11:39, Chris B wrote:
On 11/01/2019 10:52, Dave Plowman (News) wrote:
In article ,
Â*Â*Â* Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.Â* They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around.Â* One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel.Â* Has anyone seen any
of these?

Do you mean slip joint pliers? Sometimes called water pump pliers. But
not
really like a mole grip, and only a simple pivot, so not as much grip.

No I think they are different - I have seen these; indeed I was using
some only last weekend.Â* (they are very old- but still worked).Â*Â* They
are just like mole grips but the pivot point can be moved like water
pump pliers.Â* Should be on the site where they are this afternoon so I
will take a photo and post it if nothing comes up sooner.

Found a similar (modern) set with image search. For some reason adding
French to the search term made all the difference.

https://img.vpindustries.fr/dolex/im...taux_BL250.jpg

--
Chris B (News)

Does anyone know what these grips are called?
 

Chris B wrote:
On 11/01/2019 11:39, Chris B wrote:
On 11/01/2019 10:52, Dave Plowman (News) wrote:
In article ,
Â*Â*Â* Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.Â* They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around.Â* One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the
jaws to
open a bit wider, and to stay a bit more parallel.Â* Has anyone seen any
of these?

Do you mean slip joint pliers? Sometimes called water pump pliers.
But not
really like a mole grip, and only a simple pivot, so not as much grip.

No I think they are different - I have seen these; indeed I was using
some only last weekend.Â* (they are very old- but still worked).Â*Â* They
are just like mole grips but the pivot point can be moved like water
pump pliers.Â* Should be on the site where they are this afternoon so I
will take a photo and post it if nothing comes up sooner.

Found a similar (modern) set with image search. For some reason adding
French to the search term made all the difference.

https://img.vpindustries.fr/dolex/im...taux_BL250.jpg


Yes, extremely similar to that, but the jaws were not at all
claw-shaped. But many thanks for that.

Does anyone know what these grips are called?
 

newshound wrote:
On 11/01/2019 11:39, Chris B wrote:
On 11/01/2019 10:52, Dave Plowman (News) wrote:
In article ,
Â*Â*Â* Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.Â* They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around.Â* One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the
jaws to
open a bit wider, and to stay a bit more parallel.Â* Has anyone seen any
of these?

Do you mean slip joint pliers? Sometimes called water pump pliers.
But not
really like a mole grip, and only a simple pivot, so not as much grip.

No I think they are different - I have seen these; indeed I was using
some only last weekend.Â* (they are very old- but still worked).Â*Â* They
are just like mole grips but the pivot point can be moved like water
pump pliers.Â* Should be on the site where they are this afternoon so I
will take a photo and post it if nothing comes up sooner.

Sounds clever. I think the Mole is one of the most useful of tools. I've
heard of people using them as a temporary replacement for a lost
motorcycle gear pedal. The lack of parallelism at wide openings is one
of their few weaknesses.

I've used them as a gear pedal when I was a lad, but they are obviously
a bit awkward to use, and they wreck the end of the shaft. Mind you,
the splines on the pedal shaft never lasted long anyway.

I once temporarily replaced a throttle twist-grip with a choke lever
which was clearly a very bad thing to do. Fortunately, the roads were
much quieter then.

Does anyone know what these grips are called?
 

Andy Burns wrote:
Dan S. MacAbre wrote:

a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions

http://www.expert-toolstore.com/facom-lock-grip-pliers/1348-facom-500-short-nose-4-position-lock-grip-pliers


Yes, that's it. Although ISTR that the bottom jaw was a bit more
substantial. But I could easily have imagined that.

Does anyone know what these grips are called?
 

Dan S. MacAbre wrote:

Andy Burns wrote:

facom-500-short-nose-4-position-lock-grip-pliers

Yes, that's it.Â* Although ISTR that the bottom jaw was a bit more
substantial.Â* But I could easily have imagined that.

There are several varigations in the 500A range (the 500 I linked to
seems to be discontinued)

https://www.facom.com/uk/products/500A-Series-Description.html

Does anyone know what these grips are called?
 

Andy Burns wrote:
Dan S. MacAbre wrote:

Andy Burns wrote:

facom-500-short-nose-4-position-lock-grip-pliers

Yes, that's it.Â* Although ISTR that the bottom jaw was a bit more
substantial.Â* But I could easily have imagined that.

There are several varigations in the 500A range (the 500 I linked to
seems to be discontinued)

https://www.facom.com/uk/products/500A-Series-Description.html

Great, thanks. I have to say that IMVHO, they worked rather well.

Does anyone know what these grips are called?
 

On Friday, January 11, 2019 at 12:39:38 PM UTC, Dan S. MacAbre wrote:
Andy Burns wrote:
Dan S. MacAbre wrote:

Andy Burns wrote:

facom-500-short-nose-4-position-lock-grip-pliers

Yes, that's it.Â* Although ISTR that the bottom jaw was a bit more
substantial.Â* But I could easily have imagined that.

There are several varigations in the 500A range (the 500 I linked to
seems to be discontinued)

https://www.facom.com/uk/products/500A-Series-Description.html

Great, thanks. I have to say that IMVHO, they worked rather well.

https://www.amazon.fr/s/ref=nb_sb_no...ex+pince+etaux

Does anyone know what these grips are called?
 

On Friday, 11 January 2019 10:23:09 UTC, Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel. Has anyone seen any
of these?

Water pump pliers
https://en.wikipedia.org/wiki/Tongue-and-groove_pliers

Does anyone know what these grips are called?
 

On Friday, January 11, 2019 at 12:10:38 PM UTC, Bob Eager wrote:
On Fri, 11 Jan 2019 11:46:46 +0000, newshound wrote:

On 11/01/2019 11:39, Chris B wrote:
On 11/01/2019 10:52, Dave Plowman (News) wrote:
In article ,
Â*Â*Â* Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.Â* They are
retired farmers, and there are interesting mountains of tools both
ancient and modern lying around.Â* One of the modern ones that I
rather liked was like a kind of Mole grip, but the
pivot/fulcrum/whatever could be moved into four positions, a bit like
a deck chair, and it allowed the jaws to open a bit wider, and to
stay a bit more parallel.Â* Has anyone seen any of these?

Do you mean slip joint pliers? Sometimes called water pump pliers. But
not really like a mole grip, and only a simple pivot, so not as much
grip.

No I think they are different - I have seen these; indeed I was using
some only last weekend.Â* (they are very old- but still worked).Â*Â* They
are just like mole grips but the pivot point can be moved like water
pump pliers.Â* Should be on the site where they are this afternoon so I
will take a photo and post it if nothing comes up sooner.

Sounds clever. I think the Mole is one of the most useful of tools. I've
heard of people using them as a temporary replacement for a lost
motorcycle gear pedal. The lack of parallelism at wide openings is one
of their few weaknesses.

I just bought a new pair, the others having 'disappeared'. The pair they
replaced was bought from the same shop (in Brighton) over 50 years ago -
it's now being run by the fifth generation of the family!


Dockerills?

Does anyone know what these grips are called?
 

Dan S. MacAbre used his keyboard to write :
I have a couple of pairs of waterpump pliers - some of the most useful things
I have. The things I'm thinking of are a bit like that though. Mostly like
Mole grips, but having a line of pivots at right-angles to the line of the
handle, rather than just one. You can pull the moving handle back against
the spring, and move the pivot to another recess to widen the jaws. The name
stamped into the handle was French, but I can't remember it.

I think they are what electricians used to use to tighten steel
conduits and they called them 'dogs'. The proper name, I don't know,
but made by 'mole'. Two parts sort of L shaped, one fitted into the
other and the pivot point was a threaded thumb screw bolt. That was
adjustable to enable the 'dogs' to be used on various conduit sizes.

When worn, they tended to slip and bit your fingers - a small pair of
Stillsons was much safer and gripped rather better.

Does anyone know what these grips are called?
 

Tandy used to have those. I think they were just called parallel grip
pliers. Rather odd name but I gues they were made by some other company. I
wonder where mine went?
That is going to annoy me now. Very handy for taps.
Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"Dan S. MacAbre" wrote in message
...
We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was like
a kind of Mole grip, but the pivot/fulcrum/whatever could be moved into
four positions, a bit like a deck chair, and it allowed the jaws to open a
bit wider, and to stay a bit more parallel. Has anyone seen any of these?

Does anyone know what these grips are called?
 

In article ,
Harry Bloomfield wrote:
Dan S. MacAbre used his keyboard to write :
I have a couple of pairs of waterpump pliers - some of the most useful things
I have. The things I'm thinking of are a bit like that though. Mostly like
Mole grips, but having a line of pivots at right-angles to the line of the
handle, rather than just one. You can pull the moving handle back against
the spring, and move the pivot to another recess to widen the jaws. The name
stamped into the handle was French, but I can't remember it.

I think they are what electricians used to use to tighten steel
conduits and they called them 'dogs'. The proper name, I don't know,
but made by 'mole'. Two parts sort of L shaped, one fitted into the
other and the pivot point was a threaded thumb screw bolt. That was
adjustable to enable the 'dogs' to be used on various conduit sizes.

The ones I used and still use are "Footprints". That's the name of the firm
that made tehm.

When worn, they tended to slip and bit your fingers - a small pair of
Stillsons was much safer and gripped rather better.

I found rather good set of self adjusting grips made in NZ. As the
salesman said "they have to be simple - we sell them in Australia"

--
from KT24 in Surrey, England
"I'd rather die of exhaustion than die of boredom" Thomas Carlyle

Does anyone know what these grips are called?
 

Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.* They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around.* One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel.* Has anyone seen any
of these?

Thanks, all. It turns out it was these

http://www.expert-toolstore.com/faco...ck-grip-pliers

But they've been replaced by a newer model.

Does anyone know what these grips are called?
 

charles wrote :
The ones I used and still use are "Footprints". That's the name of the firm
that made tehm.

Sorry, yes Footprints - they used to have an outline of a footprint
stamped upon them..

Does anyone know what these grips are called?
 

"harry" wrote in message
...
On Friday, 11 January 2019 10:23:09 UTC, Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel. Has anyone seen any
of these?

Water pump pliers
https://en.wikipedia.org/wiki/Tongue-and-groove_pliers

Different animal entirely, no mole grip action.

Does anyone know what these grips are called?
 

On 11/01/2019 17:24, Dan S. MacAbre wrote:
Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.Â* They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around.Â* One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be
moved into four positions, a bit like a deck chair, and it allowed the
jaws to open a bit wider, and to stay a bit more parallel.Â* Has anyone
seen any of these?

Thanks, all.Â* It turns out it was these

http://www.expert-toolstore.com/faco...ck-grip-pliers


But they've been replaced by a newer model.

Ah well I was going to suggest these:

https://imgur.com/a/HNe8IBJ

Does anyone know what these grips are called?
 

On 11/01/2019 12:28, Dan S. MacAbre wrote:
newshound wrote:


I've used them as a gear pedal when I was a lad, but they are obviously
a bit awkward to use, and they wreck the end of the shaft.Â* Mind you,
the splines on the pedal shaft never lasted long anyway.

Velocettes had a square shaft.


I once temporarily replaced a throttle twist-grip with a choke lever
which was clearly a very bad thing to do.Â* Fortunately, the roads were
much quieter then.

Seems pretty safe to me. Certainly better than setting the throttle to,
say, 1000 rpm and using the advance/retard lever for finer control.

Does anyone know what these grips are called?
 

On Friday, 11 January 2019 10:23:09 UTC, Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel. Has anyone seen any
of these?

Closely related: carver clamp.


NT

Does anyone know what these grips are called?
 

On Fri, 11 Jan 2019 06:34:44 -0800, jkn wrote:

On Friday, January 11, 2019 at 12:10:38 PM UTC, Bob Eager wrote:
On Fri, 11 Jan 2019 11:46:46 +0000, newshound wrote:

On 11/01/2019 11:39, Chris B wrote:
On 11/01/2019 10:52, Dave Plowman (News) wrote:
In article ,
Â*Â*Â* Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.Â* They are
retired farmers, and there are interesting mountains of tools both
ancient and modern lying around.Â* One of the modern ones that I
rather liked was like a kind of Mole grip, but the
pivot/fulcrum/whatever could be moved into four positions, a bit
like a deck chair, and it allowed the jaws to open a bit wider,
and to stay a bit more parallel.Â* Has anyone seen any of these?

Do you mean slip joint pliers? Sometimes called water pump pliers.
But not really like a mole grip, and only a simple pivot, so not as
much grip.

No I think they are different - I have seen these; indeed I was
using some only last weekend.Â* (they are very old- but still
worked).Â*Â* They are just like mole grips but the pivot point can be
moved like water pump pliers.Â* Should be on the site where they are
this afternoon so I will take a photo and post it if nothing comes
up sooner.

Sounds clever. I think the Mole is one of the most useful of tools.
I've heard of people using them as a temporary replacement for a lost
motorcycle gear pedal. The lack of parallelism at wide openings is
one of their few weaknesses.

I just bought a new pair, the others having 'disappeared'. The pair
they replaced was bought from the same shop (in Brighton) over 50 years
ago -
it's now being run by the fifth generation of the family!


Dockerills?

Of course. I was in Brighton a few times last year and ended up having an
interesting conversation with two of the staff. I still have some tools I
bought there 52 years ago.

--
My posts are my copyright and if @diy_forums or Home Owners' Hub
wish to copy them they can pay me £1 a message.
Use the BIG mirror service in the UK: http://www.mirrorservice.org
*lightning surge protection* - a w_tom conductor

Does anyone know what these grips are called?
 

newshound wrote:
On 11/01/2019 12:28, Dan S. MacAbre wrote:
newshound wrote:


I've used them as a gear pedal when I was a lad, but they are
obviously a bit awkward to use, and they wreck the end of the shaft.
Mind you, the splines on the pedal shaft never lasted long anyway.

Velocettes had a square shaft.


Seems dependable, but how do you make adjustments to the angle? Or do
you just hope your ankle bends at the correct angle? :-)


I once temporarily replaced a throttle twist-grip with a choke lever
which was clearly a very bad thing to do.Â* Fortunately, the roads were
much quieter then.

Seems pretty safe to me. Certainly better than setting the throttle to,
say, 1000 rpm and using the advance/retard lever for finer control.

The way I fitted it, you had to push it forward to open the throttle. A
bit counter-intuitive.

I remember we were trying to teach a girl to ride. She couldn't get
used to the idea that you twisted it back to speed up, and let it go
forward to slow down. So she'd pull it back to try to slow down, and
usually ended up accelerating into a hedge, or something. She got the
hang of it eventually, though.

Does anyone know what these grips are called?
 

Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.Â* They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around.Â* One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel.Â* Has anyone seen any
of these?
A picture is worth a thousand words.

Does anyone know what these grips are called?
 

On Wed, 13 Feb 2019 21:33:42 +1100, FMurtz
wrote:

Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.* They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around.* One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel.* Has anyone seen any
of these?
A picture is worth a thousand words.

Commonly called water pump pliers -


https://www.screwfix.com/p/irwin-vic...t-pliers/43518

Does anyone know what these grips are called?
 

"Peter Parry" wrote in message
...
On Wed, 13 Feb 2019 21:33:42 +1100, FMurtz
wrote:

Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws. They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around. One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel. Has anyone seen any
of these?
A picture is worth a thousand words.

Commonly called water pump pliers -

https://www.screwfix.com/p/irwin-vic...t-pliers/43518

That's a different animal entirely. No mole grip action with those.

Does anyone know what these grips are called?
 

On 13 Feb 2019 at 10:57:07, Peter Parry wrote:
On Wed, 13 Feb 2019 21:33:42 +1100, FMurtz
wrote:

Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.* They are retired
farmers, and there are interesting mountains of tools both ancient and
modern lying around.* One of the modern ones that I rather liked was
like a kind of Mole grip, but the pivot/fulcrum/whatever could be moved
into four positions, a bit like a deck chair, and it allowed the jaws to
open a bit wider, and to stay a bit more parallel.* Has anyone seen any
of these?
A picture is worth a thousand words.

Commonly called water pump pliers -


https://www.screwfix.com/p/irwin-vic...t-pliers/43518


I've always called them "Gordon's" and have had them for at least 50 years.

Does anyone know what these grips are called?
 

Bob Martin wrote in
:

On 13 Feb 2019 at 10:57:07, Peter Parry wrote:
On Wed, 13 Feb 2019 21:33:42 +1100, FMurtz
wrote:

Dan S. MacAbre wrote:
We were in Italy over the new year visiting in-laws.* They are
retired farmers, and there are interesting mountains of tools both
ancient and modern lying around.* One of the modern ones that I
rather liked was like a kind of Mole grip, but the
pivot/fulcrum/whatever could be moved into four positions, a bit
like a deck chair, and it allowed the jaws to open a bit wider, and
to stay a bit more parallel.* Has anyone seen any of these?
A picture is worth a thousand words.

Commonly called water pump pliers -


https://www.screwfix.com/p/irwin-vic...nt-pliers/4351
8


I've always called them "Gordon's" and have had them for at least 50
years.



https://www.facom.com/uk/products/50...scription.html