Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can I
use them for the job? How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.

On 14/11/2018 11:23, JoeJoe wrote:
Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can I
use them for the job?Â* How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.

The sticks come in different lengths so you have to buy them separately.
No idea how they attach. I've never needed to attach one.

--
--

Colin Bignell

JoeJoe Wrote in message:
Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can I
use them for the job? How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.


No sticks on eBay due to impossible postage?

Epoxy casting onto end of WHY? Minor whittling possibly required...
--
Jim K


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

On 14/11/2018 16:45, Jim K wrote:
JoeJoe Wrote in message:
Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can I
use them for the job? How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.


No sticks on eBay due to impossible postage?

Epoxy casting onto end of WHY? Minor whittling possibly required...

I am happy to sacrifice one the the spare cues - length should be fine.

Problem I have is that it looks as if the spider/cross need to be
screwed to the stick (see photos above), and I don't thing a plain cue,
even without a tip will allow that.

JoeJoe Wrote in message:
On 14/11/2018 16:45, Jim K wrote:
JoeJoe Wrote in message:
Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can I
use them for the job? How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.


No sticks on eBay due to impossible postage?

Epoxy casting onto end of WHY? Minor whittling possibly required...

I am happy to sacrifice one the the spare cues - length should be fine.

Problem I have is that it looks as if the spider/cross need to be
screwed to the stick (see photos above)

Dead link.?

--
Jim K


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

On Wednesday, 14 November 2018 18:22:40 UTC, JoeJoe wrote:
JoeJoe Wrote in message:

Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can I
use them for the job? How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.

I am happy to sacrifice one the the spare cues - length should be fine.

Problem I have is that it looks as if the spider/cross need to be
screwed to the stick (see photos above), and I don't thing a plain cue,
even without a tip will allow that.

So you'll either cut the cue tight & screw it in, glue it in or measure the thread and find out how to cut a matching thread. What exactly is the problem?


NT

On 14/11/2018 11:23, JoeJoe wrote:
Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can I
use them for the job?Â* How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.

Do your spare cues have screw-on brass ends? I'm guessing the rests
would have the same thread.

Cheers
--
Clive

On 15/11/2018 15:44, Clive Arthur wrote:
On 14/11/2018 11:23, JoeJoe wrote:
Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can I
use them for the job?Â* How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.

Do your spare cues have screw-on brass ends?Â* I'm guessing the rests
would have the same thread.

Cheers

I have no idea - sorry, I am a total ignorant when it comes to these
things...

This is what the tip of the cue looks like:
http://tinypic.com/r/not6df/9

I was expecting to be able to find sticks/shafts with a thread at the
top quite easily, but couldn't find any, hence the original question.

I suppose I can always carefully work the top of the cue with a rasp to
slightly larger than the size required and force it to screw into the
rest/bridge.

On 15/11/2018 18:15, JoeJoe wrote:
On 15/11/2018 15:44, Clive Arthur wrote:
On 14/11/2018 11:23, JoeJoe wrote:
Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can
I use them for the job?Â* How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.

Do your spare cues have screw-on brass ends?Â* I'm guessing the rests
would have the same thread.

Cheers

I have no idea - sorry, I am a total ignorant when it comes to these
things...

This is what the tip of the cue looks like:
http://tinypic.com/r/not6df/9

I was expecting to be able to find sticks/shafts with a thread at the
top quite easily, but couldn't find any, hence the original question.

I suppose I can always carefully work the top of the cue with a rasp to
slightly larger than the size required and force it to screw into the
rest/bridge.

The brass ferrule will probably unscrew from the cue, it'll be very
tight. It might just be forced on.

https://tinyurl.com/y9tww4gy

Cheers
--
Clive

On Thursday, 15 November 2018 18:16:09 UTC, JoeJoe wrote:
On 15/11/2018 15:44, Clive Arthur wrote:
On 14/11/2018 11:23, JoeJoe wrote:
Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can I
use them for the job?Â* How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.

Do your spare cues have screw-on brass ends?Â* I'm guessing the rests
would have the same thread.

Cheers

I have no idea - sorry, I am a total ignorant when it comes to these
things...

This is what the tip of the cue looks like:
http://tinypic.com/r/not6df/9

I was expecting to be able to find sticks/shafts with a thread at the
top quite easily, but couldn't find any, hence the original question.

I suppose I can always carefully work the top of the cue with a rasp to
slightly larger than the size required and force it to screw into the
rest/bridge.

from the few I've seen disassembled, brass tips screw on. Plastic ones OTOH push on.


NT

In article
,
says...

I have no idea - sorry, I am a total ignorant when it comes to these
things...

This is what the tip of the cue looks like:
http://tinypic.com/r/not6df/9

I was expecting to be able to find sticks/shafts with a thread at the
top quite easily, but couldn't find any, hence the original question.


Why don't you ask somebody who might know, such as a Sports
supplier - Billiard, snooker and pool players still need to
buy chalk, replacement tips and cues and they have to get them
from somewhere!

Or try a web search. Here's the first one I found:

https://www.amazon.co.uk/57-BRIDGE-REST-
STICK/dp/B007KIZCPI/ref=sr_1_6?ie=UTF8&qid=1542307602&sr=8-6
&keywords=snooker+rests+and+spiders

or: https://tinyurl.com/y7qmxvt8

--

Terry

---
This email has been checked for viruses by AVG.
https://www.avg.com

On 15/11/2018 18:49, Terry Casey wrote:
In article
,
says...

I have no idea - sorry, I am a total ignorant when it comes to these
things...

This is what the tip of the cue looks like:
http://tinypic.com/r/not6df/9

I was expecting to be able to find sticks/shafts with a thread at the
top quite easily, but couldn't find any, hence the original question.


Why don't you ask somebody who might know, such as a Sports
supplier - Billiard, snooker and pool players still need to
buy chalk, replacement tips and cues and they have to get them
from somewhere!

Or try a web search. Here's the first one I found:

https://www.amazon.co.uk/57-BRIDGE-REST-
STICK/dp/B007KIZCPI/ref=sr_1_6?ie=UTF8&qid=1542307602&sr=8-6
&keywords=snooker+rests+and+spiders

or: https://tinyurl.com/y7qmxvt8


Thanks, I saw these - this is the only hit I got when I searched. Reason
I didn't proceed with them was because they didn't have a thread, whilst
the rest does, so I thought that they were incompatible.

On 15/11/2018 18:25, Clive Arthur wrote:
On 15/11/2018 18:15, JoeJoe wrote:
On 15/11/2018 15:44, Clive Arthur wrote:
On 14/11/2018 11:23, JoeJoe wrote:
Looking for a rest for the above - cross and spider - nothing fancy.

Plenty to choose from, e.g.
https://www.ebay.co.uk/itm/Pool-Snoo...e/252322074210,
but I cannot find a "stick" to go with them.

Am I missing a trick? I have a couple of cues that I don't need. Can
I use them for the job?Â* How would they attach to each other?

Sorry if answer is obvious - I am happy to admit total ignorance.

Do your spare cues have screw-on brass ends?Â* I'm guessing the rests
would have the same thread.

Cheers

I have no idea - sorry, I am a total ignorant when it comes to these
things...

This is what the tip of the cue looks like:
http://tinypic.com/r/not6df/9

I was expecting to be able to find sticks/shafts with a thread at the
top quite easily, but couldn't find any, hence the original question.

I suppose I can always carefully work the top of the cue with a rasp
to slightly larger than the size required and force it to screw into
the rest/bridge.

The brass ferrule will probably unscrew from the cue, it'll be very
tight.Â* It might just be forced on.

https://tinyurl.com/y9tww4gy

Cheers

Thanks a lot - I'll give it a try.