Binky's back ...
 

https://youtu.be/NX4lBvHDMs8

Binky's back ...
 

Andy Burns wrote:
https://youtu.be/NX4lBvHDMs8


Another fine episode of fabrication. I must admit though Im keen to see
how theyre going to squeeze in all the engine ancillaries that they
stripped off to make it fit. Things like turbo, alternator, radiator,
intercooler, oil cooler, air filter etc etc. Theres not a lot of room to
work with!

Tim

--
Please don't feed the trolls

Binky's back ...
 

On 02/08/2018 07:50, Tim+ wrote:
Andy Burns wrote:
https://youtu.be/NX4lBvHDMs8


Another fine episode of fabrication. I must admit though Im keen to see
how theyre going to squeeze in all the engine ancillaries that they
stripped off to make it fit. Things like turbo, alternator, radiator,
intercooler, oil cooler, air filter etc etc. Theres not a lot of room to
work with!

ISTR they have already done an episode on thing like getting the rads in.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

Binky's back ...
 

John Rumm wrote:

ISTR they have already done an episode on thing like getting the rads in.

Yeah, as part of the flip-up bonnet ...

Binky's back ...
 

John Rumm Wrote in message:
On 02/08/2018 07:50, Tim+ wrote:
Andy Burns wrote:
https://youtu.be/NX4lBvHDMs8


Another fine episode of fabrication. I must admit though I?m keen to see
how they?re going to squeeze in all the engine ancillaries that they
stripped off to make it fit. Things like turbo, alternator, radiator,
intercooler, oil cooler, air filter etc etc. There?s not a lot of room to
work with!

ISTR they have already done an episode on thing like getting the rads in.


It's been so long I'd forgotten. ;-)

For anyone who enjoys this kind of stuff check out the Nissan
Fairlady on Mighty Car Mods. Not in the same league in terms of
fabrication but still very watchable.

The journey starts here but you can jump in later of course.
https://youtu.be/hcz4kDg8r8U

Tim

--

Binky's back ...
 

On Wed, 01 Aug 2018 22:21:58 +0100, Andy Burns wrote:

https://youtu.be/NX4lBvHDMs8

Just hoping it doesn't get written off by a collision with a Polish truck
the first time they take it out. Can you imagine after all that work?
shudder




--
This message may be freely reproduced without limit or charge only via
the Usenet protocol. Reproduction in whole or part through other
protocols, whether for profit or not, is conditional upon a charge of
GBP10.00 per reproduction. Publication in this manner via non-Usenet
protocols constitutes acceptance of this condition.

Binky's back ...
 

On 04/08/2018 12:57, Cursitor Doom wrote:
On Wed, 01 Aug 2018 22:21:58 +0100, Andy Burns wrote:

https://youtu.be/NX4lBvHDMs8

Just hoping it doesn't get written off by a collision with a Polish truck
the first time they take it out. Can you imagine after all that work?
shudder

I don't think it will ever happen. When they take a whole episode to fit
a motorised bonnet opening mechanism, and then scrap it, I don't think
they ever intend to finish the car.

It's a means to fill in when they don't have any work! The more
episodes, the less work they have!

Interesting in the latest episode, he mentions SOHCAHTOA he them goes
onto using Pythagoras using a result of Tangent calculation rather that
directly using Sine or Cosine of the angle!

Binky's back ...
 

On 04/08/18 14:27, Fredxx wrote:
On 04/08/2018 12:57, Cursitor Doom wrote:
On Wed, 01 Aug 2018 22:21:58 +0100, Andy Burns wrote:

https://youtu.be/NX4lBvHDMs8

Just hoping it doesn't get written off by a collision with a Polish truck
the first time they take it out. Can you imagine after all that work?
shudder

I don't think it will ever happen. When they take a whole episode to fit
a motorised bonnet opening mechanism, and then scrap it, I don't think
they ever intend to finish the car.

It's a means to fill in when they don't have any work! The more
episodes, the less work they have!

Interesting in the latest episode, he mentions SOHCAHTOA he them goes
onto using Pythagoras using a result of Tangent calculation rather that
directly using Sine or Cosine of the angle!

Yep. I spotted that..



--
A lie can travel halfway around the world while the truth is putting on
its shoes.

Binky's back ...
 

Fredxx wrote:
On 04/08/2018 12:57, Cursitor Doom wrote:
On Wed, 01 Aug 2018 22:21:58 +0100, Andy Burns wrote:

https://youtu.be/NX4lBvHDMs8

Just hoping it doesn't get written off by a collision with a Polish truck
the first time they take it out. Can you imagine after all that work?
shudder

I don't think it will ever happen. When they take a whole episode to fit
a motorised bonnet opening mechanism, and then scrap it, I don't think
they ever intend to finish the car.

What makes you think they scrapped it? I dont recall that.

Tim


--
Please don't feed the trolls