Last week I core drilled a hole for an extractor fan in the gf's bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week later.


--
Adam

On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

Impressed. Your skills are awesome, being able to get at least a week's
worth of cleaning in one hit.

On 27/05/2018 11:20, Richard wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

Impressed. Your skills are awesome, being able to get at least a week's
worth of cleaning in one hit.


I lent her my Henry from the van.

All I am getting ATM is "When are you going to fit the fan?"



--
Adam

On 27/05/18 11:27, ARW wrote:
On 27/05/2018 11:20, Richard wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

Impressed. Your skills are awesome, being able to get at least a
week's worth of cleaning in one hit.


I lent her my Henry from the van.

All I am getting ATM is "When are you going to fit the fan?"


Are you able to get in a bit more brick dust with that?

On 27/05/2018 11:48, Richard wrote:
On 27/05/18 11:27, ARW wrote:
On 27/05/2018 11:20, Richard wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in
the air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a
week later.

Impressed. Your skills are awesome, being able to get at least a
week's worth of cleaning in one hit.


I lent her my Henry from the van.

All I am getting ATM is "When are you going to fit the fan?"


Are you able to get in a bit more brick dust with that?

She has gone to work. I might do the chase up the wall for the cable
whilst she is at work.



--
Adam

On 27/05/18 12:30, ARW wrote:
On 27/05/2018 11:48, Richard wrote:
On 27/05/18 11:27, ARW wrote:
On 27/05/2018 11:20, Richard wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in
the air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a
week later.

Impressed. Your skills are awesome, being able to get at least a
week's worth of cleaning in one hit.


I lent her my Henry from the van.

All I am getting ATM is "When are you going to fit the fan?"


Are you able to get in a bit more brick dust with that?

She has gone to work. I might do the chase up the wall for the cable
whilst she is at work.

Great! Don't forget to post pics. A video of the reaction would be a bonus.

On 27/05/2018 12:30, ARW wrote:
On 27/05/2018 11:48, Richard wrote:
On 27/05/18 11:27, ARW wrote:
On 27/05/2018 11:20, Richard wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in
the air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a
week later.

Impressed. Your skills are awesome, being able to get at least a
week's worth of cleaning in one hit.


I lent her my Henry from the van.

All I am getting ATM is "When are you going to fit the fan?"


Are you able to get in a bit more brick dust with that?

She has gone to work. I might do the chase up the wall for the cable
whilst she is at work.

With an angle grinder to ensure maximum dust?

SteveW

On Sunday, 27 May 2018 11:27:50 UTC+1, ARW wrote:
All I am getting ATM is "When are you going to fit the fan?"

Bathroom's got to be completely clean before fitting the fan as otherwise it will suck the dust into its motor.

Probably about six months should do.

Owain

On 27/05/2018 11:27, ARW wrote:
On 27/05/2018 11:20, Richard wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

Impressed. Your skills are awesome, being able to get at least a
week's worth of cleaning in one hit.


I lent her my Henry from the van.

You certainly know how to treat her!

--
F

On Sunday, 27 May 2018 11:14:04 UTC+1, ARW wrote:

Last week I core drilled a hole for an extractor fan in the gf's bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week later.

She's lucky if that's all it is.
I cleaned up once too:
http://wiki.diyfaq.org.uk/index.php/Category:Cleaning


NT

On 27/05/2018 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.



Hope you wore hob-nailed boots in the bath to protect your feet.

Acrylic bath ??

Cheap tiling. ? Social housing ??, so shouldn't the HA be doing this ?.

Did she wash it all down the plug hole, followed by some Qtips and
wet wipes too ?.

On 27/05/2018 11:46, Andrew wrote:
On 27/05/2018 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.



Hope you wore hob-nailed boots in the bath to protect your feet.

Acrylic bath ??

Cheap tiling. ? Social housing ??, so shouldn't the HA be doing this ?.

Did she wash it all down the plug hole, followed by some Qtips and
wet wipes too ?.

DeWalt Challenger boots, a council house, enamel bath with dust sheets
in it - not that they did much apart from collect rubble[1], one tile is
upside down (you cannot see that because of the dust), the dust was
picked up by Henry and not flushed down plug hole.

It may be the LA's job to do the work (if needed). The bathroom is not
damp or mouldy however the recent addition of two kittens means the
window cannot now be left open. It is her choice to have the kittens not
the LA's choice so I decided to fit a fan and make sure the bathroom
stays mould free.


She "probably" should have asked for permission for the work doing but
she will just apply for retrospective permission when/if they notice the
work has been carried out[2].

[1] The cavity wall is full of rubble.
[2] I also fitted spot lights and I will soon fit an electric shower
without prior permission.

--
Adam

On 27/05/2018 12:22, ARW wrote:

[1] The cavity wall is full of rubble.

That's Irish cavity wall insulation.


--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk

On Sun, 27 May 2018 11:14:05 +0100, ARW
wrote:

Last week I core drilled a hole for an extractor fan in the gf's bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week later.

When doing that sort of job I have the Henry running just under where
I'm drilling and most of the 'mess' cleans itself up. ;-)

Cheers, T i m

On 27/05/2018 11:50, T i m wrote:
On Sun, 27 May 2018 11:14:05 +0100, ARW
wrote:

Last week I core drilled a hole for an extractor fan in the gf's bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week later.

When doing that sort of job I have the Henry running just under where
I'm drilling and most of the 'mess' cleans itself up. ;-)


Core holes are 360 degrees the mess goes in all directions and it needs
two arms to hold the core drill.





--
Adam

On Sun, 27 May 2018 12:26:16 +0100, ARW
wrote:

snip

She is still complaining about having to do a spot of cleaning a week later.

When doing that sort of job I have the Henry running just under where
I'm drilling and most of the 'mess' cleans itself up. ;-)


Core holes are 360 degrees

I know, I have a set and have used them quite a bit.

the mess goes in all directions

It can, yes, but much of it would go less distance away if it was
being removed at source.

and it needs
two arms to hold the core drill.

Yup, but there are ways of making a Henry nozzle stay in place under
the work, not just by using an assistant ('she' wanted the work doing,
what would stop 'her' helping)?

So, when I have used the likes of a Henry to do such jobs, one of the
'problems' is having to stop every so often to empty the Henry ...
stuff that would otherwise gone elsewhere?

Even if I'm only drilling a few holes in an internal wall, if I don't
use an envelope taped to the wall under where I'm drilling I'll get
the Mrs to hold the Henry nozzle up under it and rarely does any stuff
escape. We do that not because it's the only way of working but we
have found it the easiest way of working (not having to pull
everything out to lean up afterwards).

I used to help my mate do those sorts of jobs in his shop but one day
'someone else' help him and he was finding brick-dust in and on stuff
months later. ;-(

Cheers, T i m

My core drill set includes a hollow mandrel with a collector that connects to a Henry hose. Not perfect but the vast majority of the dust is sucked away from the cutting edge to the inside of the cutter. Keeps the cutter from clogging as long as the wall is dry. Absolutely useless with a wet wall as the dust turns to mud.

On Sun, 27 May 2018 06:06:47 -0700 (PDT)
Cynic wrote:

My core drill set includes a hollow mandrel with a collector that
connects to a Henry hose. Not perfect but the vast majority of the
dust is sucked away from the cutting edge to the inside of the
cutter. Keeps the cutter from clogging as long as the wall is dry.
Absolutely useless with a wet wall as the dust turns to mud.

I'm a +1 on that.

https://www.screwfix.com/p/marcrist-...mm-3-pcs/4441f

ARW wrote:
On 27/05/2018 11:50, T i m wrote:
On Sun, 27 May 2018 11:14:05 +0100, ARW
wrote:

Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

When doing that sort of job I have the Henry running just under where
I'm drilling and most of the 'mess' cleans itself up. ;-)


Core holes are 360 degrees the mess goes in all directions and it needs
two arms to hold the core drill.





And a girlfriend to hold the vac.

On 27/05/2018 16:32, FMurtz wrote:
ARW wrote:
On 27/05/2018 11:50, T i m wrote:
On Sun, 27 May 2018 11:14:05 +0100, ARW
wrote:

Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a
week later.

When doing that sort of job I have the Henry running just under where
I'm drilling and most of the 'mess' cleans itself up. ;-)


Core holes are 360 degrees the mess goes in all directions and it
needs two arms to hold the core drill.





And a girlfriend to hold the vac.Â*


And lose the surprise?

--
Adam

On 27/05/2018 16:49, ARW wrote:
On 27/05/2018 16:32, FMurtz wrote:
ARW wrote:
On 27/05/2018 11:50, T i m wrote:
On Sun, 27 May 2018 11:14:05 +0100, ARW
wrote:

Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a
week later.

When doing that sort of job I have the Henry running just under where
I'm drilling and most of the 'mess' cleans itself up. ;-)


Core holes are 360 degrees the mess goes in all directions and it
needs two arms to hold the core drill.





And a girlfriend to hold the vac.Â*


And lose the surprise?


Of what ? -

The mess,
A hole in the wall,
A hole in the wall surrounded by kitten fur (where they
have escaped through),
Kitty pawprints in plaster dust all over her little black
number ?.

"FMurtz" wrote in message
...
ARW wrote:
On 27/05/2018 11:50, T i m wrote:
On Sun, 27 May 2018 11:14:05 +0100, ARW
wrote:

Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

When doing that sort of job I have the Henry running just under where
I'm drilling and most of the 'mess' cleans itself up. ;-)


Core holes are 360 degrees the mess goes in all directions and it needs
two arms to hold the core drill.





And a girlfriend to hold the vac.

He's got a midget too, tho he may be getting a bit taller now.

On 27/05/2018 12:26, ARW wrote:
On 27/05/2018 11:50, T i m wrote:
On Sun, 27 May 2018 11:14:05 +0100, ARW
wrote:

Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

When doing that sort of job I have the Henry running just under where
I'm drilling and most of the 'mess' cleans itself up. ;-)


Core holes are 360 degrees the mess goes in all directions and it needs
two arms to hold the core drill.





I use an expanding decorators pole to hold a length of tile batten up
against the ceiling with some clear plastic sheeting tacked onto the
tile batten and taped to the walls with some masking tape, creating
a temporary shower-cubicle effect.

This constrains the dust to the immediate working area, else plaster
dust goes everywhere. Even worse is the dust from sand/cement base
coat plaster, as beloved by cheapskate builders, especially when
mixed with a really weak mix so that it crumbles when any attempt is
made to drill a hole.

ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.
Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

Possibly if you had used a dust sheet ............

On 27/05/2018 15:44, Mr Pounder Esquire wrote:
ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.
Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

Possibly if you had used a dust sheet ............



I did. You can see them in the photo. Left them for her to wash.


--
Adam

On 28/05/18 18:43, ARW wrote:
On 27/05/2018 15:44, Mr Pounder Esquire wrote:
ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.
Bloody hard bricks and it took me over an hour and half to drill it.

There was a bit of dust for her to clean up (and a lot of dust in the
air as seen on the photo)

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

She is still complaining about having to do a spot of cleaning a week
later.

Possibly if you had used a dust sheet ............



I did. You can see them in the photo. Left them for her to wash.


FFS. What is it with these people thinking that you have no
consideration for the gf?
I noticed the sheet in the photo. Not your fault that some dust missed.

On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

Heh. I got in an electrician in to drill a hole for an extractor fan
when I realised that the top third of the hole went through the edge of
the lintel above the window. Fortunately he had a spare diamond core
drill with him, as the first one gave up half-way through after tacking
a rebar.

--

Jeff

On 27/05/2018 17:15, Jeff Layman wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

Heh. I got in an electrician in to drill a hole for an extractor fan
when I realised that the top third of the hole went through the edge of
the lintel above the window. Fortunately he had a spare diamond core
drill with him, as the first one gave up half-way through after tacking
a rebar.



TBH its not normally an electricians job. At work I would have an
apprentice do it.

--
Adam

On Sunday, 27 May 2018 17:31:57 UTC+1, ARW wrote:
TBH its not normally an electricians job. At work I would have an
apprentice do it.

You'd give one of *your* apprentices a core drill???

The ones that have barely mastered toilet paper?

Owain

On Sunday, 27 May 2018 18:00:22 UTC+1, wrote:
On Sunday, 27 May 2018 17:31:57 UTC+1, ARW wrote:
TBH its not normally an electricians job. At work I would have an
apprentice do it.

You'd give one of *your* apprentices a core drill???

The ones that have barely mastered toilet paper?

Owain

I'd want to see some sense before giving someone a core drill, they're capable of injury very easily.

At one place even a dewalt sds made near zero progress with a drill bit. And yes, the walls were very thick.


NT

On Sunday, 27 May 2018 20:35:24 UTC+1, wrote:
You'd give one of *your* apprentices a core drill???
The ones that have barely mastered toilet paper?
I'd want to see some sense before giving someone a core drill, they're
capable of injury very easily.

I was more concerned about damage to nearby inanimate objects rather than operator injury.

Apprentices are replaceable.

Owain

On 27/05/2018 18:00, wrote:
On Sunday, 27 May 2018 17:31:57 UTC+1, ARW wrote:
TBH its not normally an electricians job. At work I would have an
apprentice do it.

You'd give one of *your* apprentices a core drill???

The ones that have barely mastered toilet paper?

I think Adam dreams of seeing a core bit stationery and a drill and
apprentice rotating. Perhaps a case for needing cordless drills?

On 27/05/2018 17:31, ARW wrote:
On 27/05/2018 17:15, Jeff Layman wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

Heh. I got in an electrician in to drill a hole for an extractor fan
when I realised that the top third of the hole went through the edge
of the lintel above the window. Fortunately he had a spare diamond
core drill with him, as the first one gave up half-way through after
tacking a rebar.



TBH its not normally an electricians job.Â* At work I would have an
apprentice do it.


What, knackering a lintel by not removing some plaster first to
check ?. Did you paint the exposed rebar with bitumen paint to
protect it ?.

A correctly instally lintel will extend 150 mm past the window
opening, so it's a bit obvious what you might hit.

On 28/05/2018 13:40, Andrew wrote:
On 27/05/2018 17:31, ARW wrote:
On 27/05/2018 17:15, Jeff Layman wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

Heh. I got in an electrician in to drill a hole for an extractor fan
when I realised that the top third of the hole went through the edge
of the lintel above the window. Fortunately he had a spare diamond
core drill with him, as the first one gave up half-way through after
tacking a rebar.



TBH its not normally an electricians job.Â* At work I would have an
apprentice do it.


What, knackering a lintel by not removing some plaster first to
check ?. Did you paint the exposed rebar with bitumen paint to
protect it ?.

A correctly instally lintel will extend 150 mm past the window
opening, so it's a bit obvious what you might hit.


At least it was on the correct wall. One apprentice drilled into next doors.

--
Adam

ARW Wrote in message:
On 28/05/2018 13:40, Andrew wrote:
On 27/05/2018 17:31, ARW wrote:
On 27/05/2018 17:15, Jeff Layman wrote:
On 27/05/18 11:14, ARW wrote:
Last week I core drilled a hole for an extractor fan in the gf's
bathroom.

Bloody hard bricks and it took me over an hour and half to drill it.

Heh. I got in an electrician in to drill a hole for an extractor fan
when I realised that the top third of the hole went through the edge
of the lintel above the window. Fortunately he had a spare diamond
core drill with him, as the first one gave up half-way through after
tacking a rebar.



TBH its not normally an electricians job. At work I would have an
apprentice do it.


What, knackering a lintel by not removing some plaster first to
check ?. Did you paint the exposed rebar with bitumen paint to
protect it ?.

A correctly instally lintel will extend 150 mm past the window
opening, so it's a bit obvious what you might hit.


At least it was on the correct wall. One apprentice drilled into next doors.


:-D

Mate of mine was knocking plaster off a party wall in a row of
terraces, until next door came round & showed him all the cracks,
dust & wonky pictures :-)
--
Jim K


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

ARW wrote on 27/05/2018 :
http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

Incredible !

A vac running just below the cutter would have prevented most of that..

On 27/05/18 22:28, Harry Bloomfield wrote:
ARW wrote on 27/05/2018 :
http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

Incredible !

A vac running just below the cutter would have prevented most of that..


He said he had no help that day and needed both hands on the core drill
(as you would for a 4" core).

Tim Watts wrote
Harry Bloomfield wrote
ARW wrote

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

Incredible !

A vac running just below the cutter would have prevented most of that..

He said he had no help that day and needed both
hands on the core drill (as you would for a 4" core).

But it would have made more sense to wait till help was available.

He has two who could have held the vac.

On Sunday, 27 May 2018 22:46:02 UTC+1, Rod Speed wrote:
Tim Watts wrote
Harry Bloomfield wrote
ARW wrote

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

Incredible !

no, quite normal

A vac running just below the cutter would have prevented most of that..

He said he had no help that day and needed both
hands on the core drill (as you would for a 4" core).

But it would have made more sense to wait till help was available.

He has two who could have held the vac.

Duct tape or wire can usually hold a vac nozzle. It ain't rocket surgery.


NT

On 28/05/18 19:33, wrote:
On Sunday, 27 May 2018 22:46:02 UTC+1, Rod Speed wrote:
Tim Watts wrote
Harry Bloomfield wrote
ARW wrote

http://wiki.diyfaq.org.uk/images/3/34/Abitofdust.jpg

Incredible !

no, quite normal

A vac running just below the cutter would have prevented most of that..

He said he had no help that day and needed both
hands on the core drill (as you would for a 4" core).

But it would have made more sense to wait till help was available.

He has two who could have held the vac.

Duct tape or wire can usually hold a vac nozzle. It ain't rocket surgery.

No it ain't, but brain science dictates that Adam took the right
approach in his circumstances. He obviously wants to have a GF who is
not bored. You know, the old "devil finds work..." thing