Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On Tue, 23 Jan 2018 17:04:08 -0000, "Brian Gaff"
wrote: Well there are many things now done. Firstly of course if power does go down, its not rocket science if power is at one end and not the other and yes, things are monitored and obviously when this happens a section is isolated and an attempt is made to route around it. This normally works if its a small area, but larger areas of course are protected in that you cannot overload a section any more, the logic stops that being possible, in theory at least. Also some power companies use a thermal imaging device on a helicopter to regularly look at power lines as odd heat increases spells possible failure and they can fix it before it becomes an issue. Underground cables are the most difficult of course as there is no way to find where the break is unless there is a tell tale crater in the ground nearby of course! Brian The woman on the phone at Western Power could say precisely that they were aware of the fault and it had affected 218 properties! Pretty f.... amazing, if you ask me. MM |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
How does power supply company locate a fault? | UK diy |